1 / 15

Experimental zone access, beamline controls and software

This technical design review discusses the experimental zone access and beamline controls for the HIE-ISOLDE project, including two experimental stations, radiation sources, shielding, interlocks, and software tools.

fowlers
Télécharger la présentation

Experimental zone access, beamline controls and software

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Experimental zone access, beamline controls and software HIE-ISOLDE Beam Transfer Lines Technical Design Review D.Voulot HIE-ISOLDE Beam Transfer Lines Technical Design Review

  2. Experimental zone access • Two experimental stations (phase 1) • Miniball (Exp. Station 1, 90 deg line) • Helical Spectrometer (Exp. Station 2, 45 deg line) • Try to keep current philosophy • Free access to experimental area • RP monitoring -> alarm in CCC • Counting room outside Bdg. 170 • Avoid unnecessary occupation in experimental area HIE-ISOLDE Beam Transfer Lines Technical Design Review

  3. Stage 1 HIE-ISOLDE Beam Transfer Lines Technical Design Review

  4. Stage 2a HIE-ISOLDE Beam Transfer Lines Technical Design Review

  5. Stage2b HIE-ISOLDE Beam Transfer Lines Technical Design Review

  6. Sources of radiation • X-rays from linac cavities • Prompt neutron radiation (high energy beams) • Radioactivity of beam -> situation is not affected by linac upgrade • Activation -> not significant at this beam intensities HIE-ISOLDE Beam Transfer Lines Technical Design Review

  7. X-rays from linac cavities • Linac shielding • Recommendations to be provided by RP • Baseline 40-80 cm concrete + lead panels for end walls • 4 or 5 access doors with RF interlock system • Outside shielding radiation should be compatible with permanent occupation work places (<3 μSv/h) • RP monitoring -> alarm in CCC • Need to ensure low background for experiments • Current X-ray background level has been measured with Miniball • Need data from SC cavities (SM18) HIE-ISOLDE Beam Transfer Lines Technical Design Review

  8. Prompt radiation 3 2 1 Case 3: not normal operation, may be used during commissioning and MD (maximum once a year) under RP’s control. • Radioactive beams • 17 MeV/u (A/q 2.5) • Few pps to ~1 ppA • Stable pilot beam • Ne5+ • 11.3 MeV/u • ~20 ppA • High intensity stable beam (gas injection) • He+ • 11.3 MeV/u • ~ 1 pnA HIE-ISOLDE Beam Transfer Lines Technical Design Review

  9. Beamline controls (stage 1) • Power converters • MQ: 42 • MD: 4 • Steerers: 15 • Beam diagnostics • DB: 15 • Vacuum (+ cryogenics) independent control system (PVSS) Standard control architecture HIE-ISOLDE Beam Transfer Lines Technical Design Review

  10. Field regulator Bending magnets operated in field regulation mode to avoid hysteresis effects and slow B-field drift Use pilot beams and scaling for weak RIB Existing solution based on Hall probes + software regulation on FEC FGC3 controllers: same functionality with logic directly at controller level Hall probe on all HEBT dipoles HIE-ISOLDE Beam Transfer Lines Technical Design Review

  11. Interlocks and personal protection • Magnet protection -> R. Mompo • RP monitoring • Independent system • Alarms in CCC • Interlocks for linac • Vacuum • RF • Linac access • Cryogenics HIE-ISOLDE Beam Transfer Lines Technical Design Review

  12. Software: existing REX tools HIE-ISOLDE Beam Transfer Lines Technical Design Review

  13. HIE-ISOLDE Beam Transfer Lines Technical Design Review

  14. REX NC-linac beam diagnostics HIE-ISOLDE Beam Transfer Lines Technical Design Review

  15. New applications New BI application for slit-scanner (BE/BI + BE/OP) Setting generator/convertor + beam optics SW to visualise and generate settings (BE/OP) Automatic cavity phasing application using Si-det (linac) (BE/BI + BE/OP) HIE-ISOLDE Beam Transfer Lines Technical Design Review

More Related