1 / 5

Issue with Y-axis Zero Calibration After Machine Power Cycle

Users report an issue where the Y-axis zero position does not retain its calibration after turning off the machine. Upon restarting, the Y-axis servo fails to repeat the correct home position, leading to potential errors in automated tasks. This inconsistency can disrupt workflow and requires immediate attention to ensure accurate machine operation. Users are encouraged to troubleshoot the zeroing process or seek further assistance to rectify this recurring issue and maintain productivity.

freira
Télécharger la présentation

Issue with Y-axis Zero Calibration After Machine Power Cycle

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Home servos

  2. Home zero on Y axis does not repeat

  3. Home servos

  4. Home zero on Y axis after turn off the machine it repeats

More Related