1 / 3

Bellville Washer Stack (Verification by Testing)

Bellville Washer Stack (Verification by Testing). Bellville Washer Stack. Comparison of the Calculated to Test data for a single washer stack. Test data Spring Rate = 3,922. lb/in. Calculated from the required minimum load on the OH coil,

freja
Télécharger la présentation

Bellville Washer Stack (Verification by Testing)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Bellville Washer Stack (Verification by Testing)

  2. Bellville Washer Stack

  3. Comparison of the Calculated to Test data for a single washer stack Test data Spring Rate = 3,922. lb/in Calculated from the required minimum load on the OH coil, Total Load = 20,157.0 lbs. at 9.47 mm displacement or = .373 in. There are 14 Stacks, with 26 Bellville spring each. Therefore: 20,157/14 = 2,128.5 lbs/mm, 2,128.5 X 25.4 mm/in =54,064 lbs/in for 14 stacks, Than K = 54,064/14 = 3,862. lb/in Calculated K = 3,862 lb/in Spring rate check, at .373 in disp. is: 3,862. X .373 = 1,440 lb per stack therefore, total load for 14 stacks = 1,440. X 14 = 20160. lb

More Related