1 / 15

Laser Beam Machining

Laser Beam Machining. Done By: Murad. Nontraditional Manufacturing Processes.

freya
Télécharger la présentation

Laser Beam Machining

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Laser Beam Machining Done By: Murad

  2. Nontraditional Manufacturing Processes Non-traditional manufacturing processes is defined as a group of processes that remove excess material by various techniques involving mechanical, thermal, electrical or chemical energy or combinations of these energies but do not use a sharp cutting tools as it needs to be used for traditional manufacturing processes.

  3. Reason for Nontraditional • Very hard fragile materials difficult to clamp for traditional machining. • When the workpiece is too flexible or thin. • When the shape of the part is too complex.

  4. Laser Beam Machining (LBM) Laser-beam machining is a thermal material-removal process that utilizes a high-energy, coherent light beam to melt and vaporize particles on the surface of metallic and non-metallic work pieces. Lasers can be used to cut, drill, weld and mark. LBM is particularly suitable for making accurately placed holes.

  5. Comparing to mechanical cutting Advantages of laser cutting over mechanical cutting : • include easier work holding and reduced contamination of work piece. • Precision may be better since the laser beam doesn't wear during the process. • There is also a reduced chance of warping the material that is being cut, as laser systems have a small heat-affected zone. • Some materials are also very difficult or impossible to cut by more traditional means. A disadvantage of laser cutting is: the high energy required.

  6. Laser beam cutting (drilling) • In drilling, energy transferred into the workpiece melts the material at the point of contact, which subsequently changes into a plasma and leaves the region. • A gas jet (typically, oxygen) can further facilitate this phase transformation and departure of material removed. • Laser drilling should be targeted for hard materials and hole geometries that are difficult to achieve with other methods.

  7. Laser beam cutting (milling) • A laser spot reflected on to the surface of a workpiece travels along a prescribed trajectory and cuts into the material. • Continuous-wave mode (CO2) gas lasers are very suitable for laser cutting providing high-average power, yielding high material-removal rates, and smooth cutting surfaces.

  8. Technology . • There is a direct correlation between cutting rate and laser energy. • There is a inverse relationship between cutting rate and material thickness .

  9. Tolerances and Surface Finish The laser beam cutting may range 0.003175 mm to 0.00635 mm.

  10. Typical Work piece Materials Depends on laser type CO2 lasers. CO2 lasers are used for industrial cutting of many materials including mild steel, aluminum, stainless steel, titanium, paper, wax, plastics, wood, and fabrics.

  11. Effects on Work Material Properties

  12. Advantage of laser beam machining • No limit to cutting path as the laser point can move any path. • The process is stress less allowing very fragile materials to be laser cut without any support. • Very hard and abrasive material can be cut. • High accuracy parts can be machined. • No cutting lubricants required. • No tool wear. • Narrow heat effected zone.

  13. Disadvantage of laser beam machining • Uneconomic on high volumes compared to stamping. • Limitations on thickness due to taper. • High capital cost. • High maintenance cost. • Assist or cover gas required.

  14. Safety Factors Personal Environmental • Contact with hot tools and work pieces • Eye contact with beam radiation • Inhalation of toxic fumes • Scattered Radiation • Deflection from surfaces • Smoke • Fumes and dust particles

  15. Reverence . • www.Wikipedia.com • www.Google.com • www.faqs.org

More Related