1 / 32

Laser beamline and laser beam parameters measurements at FLASH

Mini-Workshop on Laser Pulse Shaping, Zeuthen 30-Nov/1-Dec-2007. Laser beamline and laser beam parameters measurements at FLASH. Overview of the laser system Discussion of Parameters Summary. The Photocathode RF Gun. L-band rf gun (1.3 GHz) Pulsed 5 or 10 Hz RF pulse length up to 900 µs

jguido
Télécharger la présentation

Laser beamline and laser beam parameters measurements at FLASH

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Mini-Workshop on Laser Pulse Shaping, Zeuthen 30-Nov/1-Dec-2007 Laser beamline and laser beam parameters measurements at FLASH Overview of the laser system Discussion of Parameters Summary

  2. The Photocathode RF Gun • L-band rf gun (1.3 GHz) • Pulsed 5 or 10 Hz • RF pulse length up to 900 µs • RF power 3.2 MW or 42 MV/m max gradient • Cs2Te cathode laser beam e- beam Cathode Siegfried Schreiber, DESY * Mini-Workshop Laser Pulse Shaping * 30-Nov-2006 to 1-Dec-2006, Zeuthen

  3. General Design Issues of the Laser • L-band RF gun + requirement on e- bunches determines transverse and longitudinal shape of laser, synchronization • Photocathode: work function, QE determines wavelength, energy • Superconducting accelerator long bunch trains → Laser average power in the Watt range • Suitable type of lasermode-locked solid-state system (MOPA: synchronized oscillator + amplifiers + frequency converter to UV) Siegfried Schreiber, DESY * Mini-Workshop Laser Pulse Shaping * 30-Nov-2006 to 1-Dec-2006, Zeuthen

  4. Laser System Overview Diode-pumped Nd:YLF Oscillator In cooperation DESY/Max-Born-Institute, Berlin Modulators (AOM EOM AOM) 108 MHz 1.3 GHz 13.5 MHz Piezo tuning of cavity length Faraday isolator Pulse picker Pockels cell Remote controlled mirror box fround trip= 27 MHz Epulse= 0.3 µJ Stabilized by quartz tubes Fiber-coupled pump diodes Diode pumped Nd:YLF amplifiers Epulse= 6 µJ Imaging to the cathode Fast current control Pulse picker Faraday isolator Flashlamp pumped Nd:YLF amplifiers Beam shutter LBO BBO Relay imaging telescopes Fast current control Remote controlled attenuator Epulse< 0.3 mJ IR→ UV Double pulse generator Epulse< 50 µJ Siegfried Schreiber, DESY * Mini-Workshop Laser Pulse Shaping * 30-Nov-2006 to 1-Dec-2006, Zeuthen

  5. Modulators (AOM EOM AOM) 108 MHz 1.3 GHz 13.5 MHz Piezo tuning of cavity length fround trip= 27 MHz Stabilized by quartz tubes Fiber-coupled pump diodes Pulse Train Oscillator (PTO) • Mode-locked pulsed oscillator • Diode pumped (32 W) • Synchronized to 1.3 GHz master oscillator • 1.3 GHz EO modulator with 2 AOMs (108 + 13.5 MHz) • Phase stability < 300 fs rms • Pulse length 12 ps (fwhh) (IR) • Stabilized with quartz rods • Thermal expansion coefficientfused quartz = 0.59 ppm/K (Al = 24 ppm/K) • 27 MHz pulse train • Train length 2.5 ms, pulsed power 7 W Siegfried Schreiber, DESY * Mini-Workshop Laser Pulse Shaping * 30-Nov-2006 to 1-Dec-2006, Zeuthen

  6. 5 m m Chain of Linear Amplifiers • 2 diode pumped and 2 flashlamp pumped single pass amplifiers • Fully diode pumped version is running here at PITZ • Laser diodes: 32 W pulsed, 805 nm end pumped through fibers energy from 0.3 µJ to 6 µJ/pulse Xe flashlampsNd:YLF rod, Ø 5 or 7 mm • Flashlamps pumped heads: cheap, powerful (pulsed, 50 kW electrical/head)current control with high power IGPT switches allows flat pulse trains energy up to 300 µJ (1 MHz), 140 µJ (3 MHz) small-signal gain = 20 extractable peak power 1.2 kW, duty cycle 2% Siegfried Schreiber, DESY * Mini-Workshop Laser Pulse Shaping * 30-Nov-2006 to 1-Dec-2006, Zeuthen Fluorescence profile

  7. 1.2 nC Electron beam pulse train (30 bunches, 1 MHz) Resulting trains 800 µs After amplification (1 MHz) • 2 Pulse pickers, based on Pockels cell + polarizer → up to 3 MHz • Pre-amplification (diodes) of 1.2 ms long train • Power amplification with variable bunch pattern Amplitude Output of the laser oscillator (27 MHz) Time Siegfried Schreiber, DESY * Mini-Workshop Laser Pulse Shaping * 30-Nov-2006 to 1-Dec-2006, Zeuthen

  8. Bunch Pattern and MPS • Change bunch pattern on user request • Number of bunches • Different bunch frequencies: 1 MHz, 500 kHz, 250 kHz, 100 kHz and others • Realized with an FPGA based controller producing the appropriate trigger for the Pockels cell • The controller is also the interface of the machine protection system to the laser Siegfried Schreiber, DESY * Mini-Workshop Laser Pulse Shaping * 30-Nov-2006 to 1-Dec-2006, Zeuthen

  9. 1 MHz 599 bunches 50 kHz 100 kHz 500 kHz Lasing with long bunch trains • up to 600 bunches to beam dump • 1 MHz, 500 kHz, 100 kHz, and 50 kHz • Lasing with at least 450 bunches (limited by photon diagnostics) Siegfried Schreiber, DESY * Mini-Workshop Laser Pulse Shaping * 30-Nov-2006 to 1-Dec-2006, Zeuthen

  10. Laser beamline • Relay imaging with spatial filtering • Hard edge aperture after diode pumped amplifiers • Aperture imaged to → amplifier heads → doubling crystals → cathode Siegfried Schreiber, DESY * Mini-Workshop Laser Pulse Shaping * 30-Nov-2006 to 1-Dec-2006, Zeuthen

  11. joulemeter Variable attenuator Variable iris LBO BBO x2 Double pulse generator with variable delay photodiodes Laser beamline additions • Standard running with magnification of 10→ gives large spot on cathode (1 cm)→ together with iris at the vacuum window a quasi flat beam with fringes but without pointing jitter • Imaging also of overfilled iris on laser table to cathode • Adjustable delay to reduce fringes • Additional features: • Variable attenuator • Joulemeter, photodiodes • Double pulse generator Siegfried Schreiber, DESY * Mini-Workshop Laser Pulse Shaping * 30-Nov-2006 to 1-Dec-2006, Zeuthen

  12. UV diagnostics/doubler joulemeter variable attenuator to rf gun Pulse shaping iris λ/2 wave plate polarizing splitter telescope x2 Photodiode (phase) LBO/BBO prism UV Photo-diode Double Pulse Generator Streak Camera Siegfried Schreiber, DESY * Mini-Workshop Laser Pulse Shaping * 30-Nov-2006 to 1-Dec-2006, Zeuthen

  13. Virtual cathode and iris aperture RF gun Iris Mirror Box Virtual cathode (Ce:YAG crystal, CCD camera Siegfried Schreiber, DESY * Mini-Workshop Laser Pulse Shaping * 30-Nov-2006 to 1-Dec-2006, Zeuthen

  14. 4.4 mm 1.3 mm 4.0 mm Transverse Laser Pulse Shape • Transverse shape of the UV laser pulses is not TEMoo • Intentionally closer to flat hat to avoid spatial hole burning along the pulse train 1.6 mm Exit amplifers (IR) exit BGO on cathode (no iris) magnification ~ 5 PITZ shaping (on cathode) Siegfried Schreiber, DESY * Mini-Workshop Laser Pulse Shaping * 30-Nov-2006 to 1-Dec-2006, Zeuthen

  15. Large iris (~open) Slices With iris in front of vacuum window • With additional magnification by 2 (total ~10) • Very good pointing stability, paid with fringes (~20% modulation) Nominal iris 2.5 mm diameter Siegfried Schreiber, DESY * Mini-Workshop Laser Pulse Shaping * 30-Nov-2006 to 1-Dec-2006, Zeuthen

  16. Table Iris on cathode • Imaging the overfilled iris on laser table • Problem: larger pointing jitter than iris in front of vacuum window • Jitter about 0.5 of diameter min/max Distance iris – telescope wrong by ~1 cm Distance iris – telescope correct Siegfried Schreiber, DESY * Mini-Workshop Laser Pulse Shaping * 30-Nov-2006 to 1-Dec-2006, Zeuthen

  17. Transverse Profile Stability • Transverse profile not really flat hat • Still noticeable pointing jitter (~10 % of spot size) • Achieved good pointing stability with an additional iris in front of vacuum window (70 cm from cathode) • Paid with interference fringes (20 % modulation) • For the present FLASH running scheme: stability is more important than perfect beam shape Siegfried Schreiber, DESY * Mini-Workshop Laser Pulse Shaping * 30-Nov-2006 to 1-Dec-2006, Zeuthen

  18. Measured (UV, 262 nm) 120 Flat Top Fit FWHM = 19-24 ps rise/fall = 7-9 ps 100 80 60 amplitude 40 20 0 -20 0 10 20 30 40 50 60 Time (ps) Photon density (a.u.) 0 10 20 30 40 50 Time (ps) Laser Pulse Length and Shape • R&D laser at PITZ:Longitudinal flat-hat shape • Works fine in ‘lab environment’, not mature for a user facility • Present laser technology does not allow shorter rise/fall times • New development at MBI ongoing Longitudinal shape is Gaussian • Measurement with a streak camera (FESCA 200) sL= 4.4 ± 0.1 ps (at 262 nm) Siegfried Schreiber, DESY * Mini-Workshop Laser Pulse Shaping * 30-Nov-2006 to 1-Dec-2006, Zeuthen

  19. Pulse Stacker Siegfried Schreiber, DESY * Mini-Workshop Laser Pulse Shaping * 30-Nov-2006 to 1-Dec-2006, Zeuthen

  20. Stacker for Four Stacked Pulses Siegfried Schreiber, DESY * Mini-Workshop Laser Pulse Shaping * 30-Nov-2006 to 1-Dec-2006, Zeuthen

  21. Pulse Stacker set-up on the laser table Siegfried Schreiber, DESY * Mini-Workshop Laser Pulse Shaping * 30-Nov-2006 to 1-Dec-2006, Zeuthen

  22. Example of a Measured Profile Siegfried Schreiber, DESY * Mini-Workshop Laser Pulse Shaping * 30-Nov-2006 to 1-Dec-2006, Zeuthen

  23. Series of Measured Profiles Siegfried Schreiber, DESY * Mini-Workshop Laser Pulse Shaping * 30-Nov-2006 to 1-Dec-2006, Zeuthen

  24. Temperature Laser Room Temperature stability < 0.02 dgC- if people do not access laser room 0.05 dgC 3.5 days 6 months Siegfried Schreiber, DESY * Mini-Workshop Laser Pulse Shaping * 30-Nov-2006 to 1-Dec-2006, Zeuthen

  25. Charge Stability Stability = 1.4% rms Problem:to maintain a stability < 2 % rms fine tuning of phase matching angle of the frequency conversion crystal green to UV (BBO) often required If not tuned frequently, stability drops to 5 % rms Siegfried Schreiber, DESY * Mini-Workshop Laser Pulse Shaping * 30-Nov-2006 to 1-Dec-2006, Zeuthen

  26. RF Gun llrf with SIMCON • Amplitude and phase regulation by calculating the vector sum of forward and reflected power • FPGA based controller in operation since Dec 2005 • Phase stability of 0.14 dg of 1.3 GHz or 300 fs achieved 1 dg of 1.3 GHz = 2.1 ps Siegfried Schreiber, DESY * Mini-Workshop Laser Pulse Shaping * 30-Nov-2006 to 1-Dec-2006, Zeuthen

  27. Cathode • Cathode: Cs2Te film on a molybdenum plug • RF contact with silver coated Cu-Be spring Siegfried Schreiber, DESY * Mini-Workshop Laser Pulse Shaping * 30-Nov-2006 to 1-Dec-2006, Zeuthen

  28. QE maps • QE map: scan with small laser spot (200 µm) over the cathode (step size 300 µm) • useful to diagnose status of cathode uniformity • Example of a non-uniform cathode → We need to consider the uniformity of both, the laser beam profile and the cathode QE • May need a feedback based on beam profiles… 78.1 73.1 78.1 Siegfried Schreiber, DESY * Mini-Workshop Laser Pulse Shaping * 30-Nov-2006 to 1-Dec-2006, Zeuthen

  29. End of lifetime QE < 0.5% Cathode lifetime • Initially high QE, drops slowly to levels in the percent range • Lifetime ends if QE < 0.5% • Typically 6 months, early 2006 we observed shorter lifetimes of 2 months, now longer again End of lifetime QE < 0.5% • Lifetime depends much on the vacuum condition in the gun Siegfried Schreiber, DESY * Mini-Workshop Laser Pulse Shaping * 30-Nov-2006 to 1-Dec-2006, Zeuthen

  30. Long Term Running • TTF phase 1: 12/1998 to 12/2002→ 4 years of running (36,000 h or 13•107 s) • oscillator 25,000 h or 9.2•107 shots, amplifiers 16,000 h or 6.4•107 trains @ 1 Hz • Total on-time oscillator 70%, amplifiers 50% • TTF phase 2: upgrade end of 2003: diode pumped oscillator and preamplifiers • FLASH: Running since 3/2004 with 2 and now 5 Hz • about 3•108 y pulse trains with in average 20 pulses (av.) delivered for beam • Total on-time == always, laser runs even during the maintenance days, off only during maintenance weeks (~6 per year) Siegfried Schreiber, DESY * Mini-Workshop Laser Pulse Shaping * 30-Nov-2006 to 1-Dec-2006, Zeuthen

  31. Conclusive remarks • Good experience with the present laser system • Design philosophy pays off • As simple as possible (avoid components which require frequent adjustments) • ‘Ready-to-sell’ finish and robust • Use well-known technology (laser material, pump sources) • Fully integration into the control system as a must • Capability of long running in accelerator environment is proven • Laser room and laser development are separated: laser is part of the machine (access only for maintenance/repair) • Diagnostics as complete as possible to assist operators Siegfried Schreiber, DESY * Mini-Workshop Laser Pulse Shaping * 30-Nov-2006 to 1-Dec-2006, Zeuthen

  32. Summary of measured parameters • Temperature stability < 0.02 dgC • Laser pulse energy: IR up to 300 uJ, UV up to 50 uJ • Sufficient for some nC for present QE of cathodes • Pulse length 12 ps (fwhh) (IR), gaussian shape, sigma=4.4 ± 0.1 ps (UV) • Charge stability 1 to 2 % rms (single bunch) • Bunch train up to 800 us long, 1 MHz, 500, 250, 200, 100, 50, 40, 20, 10 kHz implemented • Phase stability < 300 fs rms • Up to now 3•108 trains (in average with 20 pulses) delivered (upgraded laser) • Transverse pulse shape: potato with fringes (20 % modulation) • Very good pointing stability Siegfried Schreiber, DESY * Mini-Workshop Laser Pulse Shaping * 30-Nov-2006 to 1-Dec-2006, Zeuthen

More Related