1 / 26

Addition Polymers Option C.3

Addition Polymers Option C.3. By: Lacey Waldrop. What is a polymer??? A polymer is a molecule composed of repeating monomers which are usually connected by covalent bonds. These are models of monomers. When combined, they form a polymer.

frisco
Télécharger la présentation

Addition Polymers Option C.3

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Addition PolymersOption C.3 By: Lacey Waldrop

  2. What is a polymer??? A polymer is a molecule composed of repeating monomers which are usually connected by covalent bonds.

  3. These are models of monomers When combined, they form a polymer

  4. What does IB want us to know about Addition Polymers???

  5. C.3.1 Describe and explain how the properties of polymers depend on their structural features.

  6. Branching There are two ways of classifying a polymer by the number of branches it has. Low-density and High-density. Get it? It looks like a tree!

  7. Low-Density Polyethene (LDPE) • Polymerized at high temperatures • Significant amount of branching • Molecules are prevented from packing close together • Flexible • Melts at about 85 degrees Celsius

  8. High-Density Polyethylene (HDPE) • Polymerized at low temperatures • Longer chains than LDPE • Molecules are able to pack more closely together • Melts at about 120 degrees Celsius • Rigid shape

  9. Another way to classify polymers is by the positions of their methyl groups.

  10. Think back to Organics… They were classified as being either “cis” or “trans”. “Cis” was when the molecules were on the same side. “Trans” was when the molecules were on opposite sides.

  11. That same concept is applied to addition polymers! 

  12. Isotactic refers to when the methyl groups are all on the same side of the polymer strand. Think “cis”.

  13. Atactic refers to when the methyl groups are on opposite sides of the polymer chain. Think “trans”.

  14. C.3.2. Describe the ways of modifying the properties of addition polymers.

  15. Plasticizers • Small molecules that can fit between long polymer chains • Weaken attraction between chains • Polymers become more flexible • Turn from rigid to completely pliable • Example: Polyvinyl chloride

  16. Volatile Hydrocarbons • Add pentane during formation of polystyrene • Heated in steam, the pentane vaporizes • Expanded polystyrene is produced • Light, good thermal material • Used as packaging

  17. ALMOST DONE YA’LL

  18. C.3.3. Discuss the advantages and disadvantages of polymer use.

  19. ADVANTAGES

  20. Polymers can be customized by • Strength • Thermal and electrical insulation • Flexibility • Density • Lack of reactivity

  21. DISADVANTAGES

  22. Depletion of Natural Resources • Most polymers are carbon based • Carbon comes from oil and coal • Both sources are limited

  23. Disposal • Lack of reactivity makes plastics • not easy to dispose • They can be burned, but if not • done properly, poisonous dioxins are produced • Hydrogen Cyanide and Hydrogen Chloride

  24. Biodegradability • Most plastics are not natural • Are not degraded by organisms • The anaerobic conditions of landfills make biodegradation very slow or cause it to stop.

  25. That’s all folks! Good luck on the IB test!

More Related