1 / 5

synopsis

synopsis. The current PAD incarnation with 119 MHz acquisition fails to resolve pulse shape to required resolution. This resolution is required not only for DUT RF signals but also for SLED tuning and pulse shaping. PAD resolution is about 40 ns . NLCTA structure tests use GS scopes (Faya)

gillian-soto
Télécharger la présentation

synopsis

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. synopsis • The current PAD incarnation with 119 MHz acquisition fails to resolve pulse shape to required resolution. This resolution is required not only for DUT RF signals but also for SLED tuning and pulse shaping. PAD resolution is about 40 ns. • NLCTA structure tests use GS scopes (Faya) • Our effective resolution is 6 bits in our current setup. Recommendation is to go to 12 bit/5ns -> 60dB dynamic range • PAC/PAD triggering system in development at TS11 • Off the shelf ZTEC EPICS recommendations: • ZT4611 E LXI 2 ch 8 bit $10,810. • ZT4612 E LXI 4 ch 8 bit $17,505 • ZT4422 E LXI 2/4 ch =1/.5 GS 12 bit $13,385.00 • ZTEC4612 available for testing • G Haller uses EPICS with Acqiris(our current DAQ system)

  2. High power RF capabilities With two 50MW XL4 klystrons ASTA can produce: 100MW @ 1.5 μs --> 550MW @ 63 ns at X-band and feed two experimental outputs in the enclosure. Variable Delay line length through variable mode converter Gate Valves Variable iris From Two 50 MW Klystrons Two experimental stations inside the enclosure, one with compressed pulse and the other without the benefit of the pulse compressor. Courtesy of Valery Dolgashev

  3. llrf configuration Power meters Dark current signals DUT FE/RE Klystron RE Vacuum AFG I&Q MIXER TWT K no SLED SRS 60 Hz SRS DG645 4 port combiner SLED AFG I&Q MIXER TWT K

  4. rf configuration FC no SLED DUT TWT K 1 I/Q SRS 60-120 Hz 3 5 7 FC trigger 4 port combiner I/Q TWT K FC 14 SLED 2 4 6 8 11 12 10 9 DUT 13 15 16 FC FCs

  5. Requirements

More Related