1 / 12

INTAKE and EXHAUST SYSTEMS

INTAKE and EXHAUST SYSTEMS. Chapter7 Classroom Manual Page 199. CBC AUTOMOTIVE. OBJECTIVES. Explain the function of the intake manifold. Explain the function of the exhaust manifold. Describe different type of air cleaners Explain purpose of heated air inlet system

gomer
Télécharger la présentation

INTAKE and EXHAUST SYSTEMS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. INTAKE and EXHAUST SYSTEMS • Chapter7 • Classroom Manual • Page 199 CBC AUTOMOTIVE

  2. OBJECTIVES • Explain the function of the intake manifold. • Explain the function of the exhaust manifold. • Describe different type of air cleaners • Explain purpose of heated air inlet system • Explain purpose of electrically heat grid • Describe operation of heat riser valve • Explain Catalytic Converter Operation CBC AUTOMOTIVE

  3. INTRODUCTION • Proper combustion requires the engine to “breathe” properly. • Intake & Exhaust manifolds & Valve train must all work together. • Determine normal & Abnormal operation of Intake and Exhaust systems • Auxiliary air preheat systems must function properly. CBC AUTOMOTIVE

  4. Intake Materials Cast Iron Aluminum Plastic Manifold Types Single Plane Dual Plane Runner Design Exhaust Materials Cast Iron Steel Tubing Stainless Steel Tubing Manifold Types Factory cast Tube Headers Runner Design MANIFOLDS CBC AUTO

  5. INTAKE MANIFOLD • Prevents condensation and assists in vaporization of air fuel mixture • Runners are Level • Equal runner length and cross section. • Wet or Dry • Inlet temp 100 • Exhaust crossover passage CBC AUTOMOTIVE

  6. DUAL PLANE CBC AUTOMOTIVE

  7. BI-METAL SENSOR CBC AUTOMOTIVE

  8. EXHAUST MANIFOLD • Made of cast iron, nodular iron, stainless steel or heavy gauge steel. • Engineered for size, flow, silencing. • A restriction of exhaust gas flow can result in excessive backpressure. • Proper tuning of the exhaust manifold (headers) creates a vacuum that assists in air/fuel mixture induction into the cylinder. CBC AUTOMOTIVE Page 292L

  9. EXHAUST MANIFOLD SERVICE • New Manifolds installed with no gasket • Don’t remove when hot • Torque correctly • Use special heat resistance fasteners Fig 7-27L

  10. ELECTRIC CATALYTIC CONVERTER • In development • Found this on the internet

  11. EXHAUST PIPE • Made from Stainless steel, zinc-plated • Double wall construction prevents “ringing” • Sealing by: • Steel composition Gasket/Washer • Ball Shaped flange against exhaust manifold flange • Fit of Pipe to Muffler or Converter should be at least 1 1/2 inches.

  12. THE END

More Related