1 / 24

Tetsuro Sekiguchi, KEK

Tetsuro Sekiguchi, KEK. BNL-E949 Collaboration. BNL, FNAL, UNM, Stony Brook Univ. (USA) Alberta, TRIUMF (Canada) IHEP, INR (Russia) Fukui, KEK, Kyoto, NDA, Osaka, Osaka RCNP (Japan). The E949 experiment The analysis The results Conclusions. Signal = Stopped + nothing.

Télécharger la présentation

Tetsuro Sekiguchi, KEK

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Tetsuro Sekiguchi, KEK BNL-E949 Collaboration BNL, FNAL, UNM, Stony Brook Univ. (USA) Alberta, TRIUMF (Canada) IHEP, INR (Russia) Fukui, KEK, Kyoto, NDA, Osaka, Osaka RCNP (Japan) • The E949 experiment • The analysis • The results • Conclusions

  2. Signal = Stopped + nothing • Low energy beam and stop in the target (intensity = E787) • Kinematics measurement momentum, energy and range • in the stopping counter • Photon veto hermetic detectors BNL-E949 = Successor of E787 side view end view

  3. RS Layer 1-5 replacement more light output • RS gain monitor system better energy calibration Improved kinematics measurement Kinamatics measurement is sensitive to signal selection

  4. New detectors in blue. • Rejection to background as a function of acceptance for E787 and E949. • better rejection at 80% of nominal acceptance. Improved photon veto

  5. Data Taking • Physics run in 2002 (12 weeks) • Beam condition was not optimized • Detector worked very well • Smooth data taking

  6. Blind Analysis • Measure Background level with real data • To avoid bias, 1/3 of data cut tuning 2/3 of data background measurement • Characterize backgrounds using back- ground functions • Likelihood Analysis Analysis Signal region“the BOX” Background sources Analysis Strategy

  7. but range is small due to interactions in RS. Changing cut position Acceptance & background levelat each point of parameter Functions Neural net function for and Background characterization Background can be characterized using background functions For muon backgrounds

  8. Branching ratio and Confidence level • Both and are small Poisson statistic • The ratio of two Poisson probabilities • # of observed candidate events in the cell Likelihood Analysis • The signal region is divided into cells. Cell construction by binning the parameter space of each function. • The signal and the background in the cell • The cell is characterized by thesignaltobackgroundratio • Likelihood ratio technique(T. Junk [NIM A434, 435 (1999)]) (BR)( : Acceptance) Likelihood estimator of cells containing candidate events

  9. NK (1012) Total acceptance (%) Sensitivity (10-10) Sensitivity and background Sensitivity Background Note: 10% larger acceptanceby enlarging the signal region, resulting inmore backgrounds For the likelihood analysis, important is the ratio in each cell NOT the total background level in signal region. All cuts are fixed and ready to open the BOX !

  10. Opening the BOX Range (cm) and Energy (MeV) for E949 data after all other cuts applied. Solid line shows signal region. Single candidate found.

  11. Event Display

  12. Branching ratio & Confidence level • E949 result alone: • Combine E787 and E949 results increase statistics (68% CL) E949(02) = combined E787&E949. E949 projection with full running period. (~60 weeks)

  13. E949 has observed an additional candidate. (68% CL, PNN1 region) from the combined E787 and E949 result. • We need more data. - Further E949 running? - Analysis of “below (PNN2) region” Conclusions • Upgrades of E787 to E949 were successful. • Likelihood analysis was performed to measure

  14. Back-up slides

  15. By courtesy of G. Isidori Central value [dashed], 68% interval [dot-dashed], 90% interval [solid] (including theoretical uncertainties)

  16. TD pulse shape

  17. Events with early decay are selected • signal: blue • background: red • arrow: candidate event

  18. Signal rate and background level for the candidate cell Signal Si Background bi

  19. Acceptance calculation Cross check

  20. Cut R = PV or TD: loosen by Cut K = KIN: loosen by more background event should be observed in loosened BOX. ( ) Verify background prediction by loosening cuts

  21. Branching ratio and confidence limits • 2002 candidate event alone • Branching ratio: • Combined measurement (1995-2002) • Combined BR:

  22. Si (BR) BR : signal • BR: • NK: # of Kaon decay • Ai: Acceptance bi: background di: # of observed events Likelihood Analysis with T. Junk method The Poisson probability to observe di with Si + bi or bi expected

  23. Likelihood Analysis with T. Junk method Summing all the set di to satisfy Then obtain the confidence level

More Related