1 / 11

Technical Advisory Board Ganil 2015

Technical Advisory Board Ganil 2015. F. Chautard GANIL-Caen.

grant
Télécharger la présentation

Technical Advisory Board Ganil 2015

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Technical Advisory Board Ganil 2015 F. Chautard GANIL-Caen Sytze Brandenburg (KVI), Frédéric Chautard (chair, GANIL), Antoine Daël (SACLAY), Bernard Launé (IPNO), Olivier Laurent (GANIL), Jerry Nolen (ARGONNE), Eric Petit (SP2/GANIL), Josiane Sauret (GANIL), Thierry Stora (CERN), Mauritzio Vretenar (CERN) Will provide advice on the technical implications, including radio-protection and safety, of the future physics requirements and the possible large-scale maintenance needed.

  2. Two meetings and active participation of the members; Version 1 of the cluster reports taken into account; About 60 points of interest « extracted » The table has been sent to physicists to be complete and corrected Great creativity of the physicists; Not all synthesis tables were filled in by the cluster groups; Poor relevant informations from safety point of view; Beam descriptions uncompleted (A, I, W ranges); Already Version 2 of the reports; INTRODUCTION

  3. Method

  4. Main proposals SISSI LISE: • A mass spectrometer would be useful behind LISE3 or LISE2000 if not Sissi SPEG: • if SISSI is not replaced, use the CLIM target / LISE separator ensemble to produce and separate the fragmented beams and place SPEG behind LISE. • To have fragmented beams in SPEG, the most viable solution is to repair SISSI. INDRA …

  5. Main proposals Alpha optics evolution LISE: • New alpha separator SPEG: • A larger beamline rigidity of the SISSI-ALPHA • improve the ensemble SISSI-ALPHA in terms of acceptance

  6. Main proposals Ganil Test Source VAMOS: • Increase of the intensity of the heavy beams Pb, U up to 20 pnA SPEG: • Larger beam intensity CIRIL, ARIBE: • GTS type sources on the C0 platforms will be interesting, for a small part of the users, to have higher energies and current for heavy ions in the CSS1 energy range. SPIRAL1, SIRA • Replace the existing C01 ion source.

  7. Main proposals Selective ion sources SPEG: • To avoid problems related to radioactivity, it is essential that the beams be as isotopically pure as possible, in principle already before injection in the CIME cyclotron SPIRAL1, SIRA: • Improvement of beam purity

  8. Main proposals Ion source developments SPIRAL1, SIRA: • The development of Alkali beams 1+N+ compact ion source • New beams: 11Li, Al, Si, 26P, 27S, 44Ti, 56Ni, 68Se, 72Kr … • In my opinion the continuation of SPIRAL1 does not make much sense unless effort is devoted to the development of new beam species. LIRAT • More species should be authorized to be driven in the LIRAT line (Presently only 4 beams are authorized 6He, 19Ne, 32Ar and 35Ar). • …

  9. Main proposals New cave SPIRAL1, SIRA: • A requirement of another cave for the study of new beams will be very important (not SIRa) requirements • Using the intense 12C beam from GANIL, the fragmentation of various target materials would considerably extend the scope of SPIRAL1 and in some cases also boost intensities EXOGAM • Development : Use with post-accelerated beam from CIME (fission fragments and other beams-other targets) SPIRAL2 ?

  10. Conclusions Already Ongoing Projects: • SISSI2 • The development of Alkali beams 1+N • Study of high power target 3kW for other beams (36S , 40Ar, 20Ne) • fusion-evaporation: Pd foil in the SPIRAL 1 ECS and the usual thick 12C target as catcher of the direct beam. To be evaluated before starting a project: • Ion source developments • GTS integration in GANIL injector • Better time resolution without decrease of the beam intensity. • pulse suppressor • Deporting the chopper after the SME • New cave • New or improved alpha spectrometer • Re-injection in SSC • Direct line G1/G2 • …

  11. Conclusions • The TAB group found a great number of interesting ideas. May be yet too many to give clear answers. • the needs have to be stated more clearly, which should be done by a more intense collaboration between the clusters and the TAB. • Machine maintenance status around 2015 • To ease TAB work : • Fill the synthesis table in or complete the TAB table • For new beams fill in the proposed table below Ready for a more intense collaboration

More Related