1 / 17

Time-of-flight measurement of ion energy

Time-of-flight measurement of ion energy. Tim Freegarde. Dipartimento di Fisica Università di Trento Italy. Time-of-flight measurement of ion energy. basic principles simple time-of-flight measurements and limitations spread-spectrum modulation linearity and nonlinearity

gunda
Télécharger la présentation

Time-of-flight measurement of ion energy

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Time-of-flight measurement of ion energy Tim Freegarde Dipartimento di Fisica Università di Trento Italy

  2. Time-of-flight measurement of ion energy • basic principles • simple time-of-flight measurements and limitations • spread-spectrum modulation • linearity and nonlinearity • pseudo-random sequences • transient (dynamical) problems

  3. Techniques for ion energy measurement • retarding field analysis ion signal ions Vr derivative ramp generator • Doppler spectroscopy spectrometer ions lens • time-of-flight chopper ions

  4. Principles of time-of-flight analysis chopper detector ions • take care to transform distributions correctly MODULATION FAST SLOW TOTAL time

  5. Modulation mechanisms • mechanical chopper balance hole trigger slit • electrostatic deflector / lens • product generation • laser, eg photolysis • pulsed source Vin

  6. Single pulse modulation CONVOLUTION • transmit short pulse of ions modulation true time-of-flight distribution • observed distribution is convolution of true distribution with modulating function = observed distribution • narrow pulse for good temporal resolution •  low signal: ions divided across distribution • modulation may be de-convoluted, but tends to amplify high-frequency noise

  7. Mathematical definitions • convolution (blurring) • correlation • Fourier transform • convolution theorem

  8. Frequency-domain analysis detector ions modulator time • measure {a(w),f(w)} as functions of modulation frequency w • time-of-flight distribution is given by

  9. variance of measured signal is - ie S/N = Acquisition time PULSED MODULATION • to measure time-of-flight distribution of duration with resolution at S/N ratio and incident ion flux we must run experiment for time SINUSOIDAL MODULATION • to measure single component at single frequency • we must run the experiment for time • for resolution over duration we must measure components • we must therefore run the experiment for a total time

  10. SPREAD-SPECTRUM MODULATION Spread-spectrum modulation • all frequencies present simultaneously in modulation function • phases adjusted so that components add in quadrature  flux at each frequency is • we therefore need only run the experiment for 20 frequencies random phases • truly random phases cause excursions out of range •  use pseudo-random functions

  11. Spread-spectrum history • Hedy Lamarr (1913-2000), George Antheil (1900-1959) patented submarine communication device • synchronized frequency hopping to evade jamming • original mechanical action based upon pianolas • used today in GPS, cellphones, digital radio http://www.ncafe.com/chris/pat2/index.html

  12. We COULD implement our spread-spectrum measurement by Spread-spectrum implementation • modulating the ion beam with a spread-spectrum function • analyzing both modulation and signal for frequency components • deriving the time-of-flight distribution from • However, if the modulating function is random – with d-function autocorrelation – then the time-of-flight distribution may be extracted more directly from • Autocorrelation of random modulating function of finite duration not quite zero • We therefore use ideal, ‘pseudo-random’ functions

  13. Linearity and saturation • nonlinearity • in deflector/modulator • due to saturation = + • nonlinearity generates harmonics of frequencies present • spread-spectrum techniques use simultaneous detection at different frequencies •  harmonics introduce false signals •  nonlinearity should be avoided… • • … or exploited: • binary modulation can’t distinguish nonlinearity •

  14. Binary pseudo-random sequences clock input Clock D SHIFT REGISTER 1 2 3 4 5 6 7 8 time • sequence length bits • with n bit shift register output AUTOCORRELATION  =

  15. Dynamically-induced effects electrostatic lens • signal detector aperture • voltage pseudo-random sequence • ions within lens element during transient see field-free change in potential •  lose or gain • two new velocity classes: • faster from 0-1 transition • slower from 1-0 transition

  16. Analysis of transient-induced signal pseudo-random sequence fast ion transient signal transient signal moved left • negative correlation transient signal moved right • positive correlation • contribution to ‘time-of-flight’ distribution: • additional correlations possible… time

  17. Time-of-flight measurement of ion energy • pseudo-random time-of-flight measurement reduces data accumulation time by factor over pulse modulation • simple pulse sequence generation • simple analysis by correlation • sensitive to nonlinearities and dynamic, transient effects • offers high resolution at lowest energies to complement retarding field energy analysis

More Related