Download
troubleshooting tips for installation issues n.
Skip this Video
Loading SlideShow in 5 Seconds..
Troubleshooting Tips for Installation issues PowerPoint Presentation
Download Presentation
Troubleshooting Tips for Installation issues

Troubleshooting Tips for Installation issues

164 Vues Download Presentation
Télécharger la présentation

Troubleshooting Tips for Installation issues

- - - - - - - - - - - - - - - - - - - - - - - - - - - E N D - - - - - - - - - - - - - - - - - - - - - - - - - - -
Presentation Transcript

  1. Troubleshooting Tipsfor Installation issues Shadowing: • Wire covering LED lens • LEDs not Spaced Properly • Product vs. Depth of the letter not correct Sign or Row Does Not Light After Installation: • Check Connection from Power Supply • Check Power Supply Leads and Jumper Wire Connections • Check to be sure output wires are connected with proper polarity Sign Does Not Light: • Check Output Voltage of Power Supply with a Voltmeter • Check Input Voltage going into the power supply with a volt meter • Check all Connections and Seal/Cap all Loose/Exposed Wires

  2. Troubleshooting Tipsfor Installation issues (cont’d) Modules Are Dim: • Check to be sure the Power Supply are not overloaded by running more LED’s then recommended One Module does not light but the others do: • The system is designed so if one module doesn’t light, it will not cause the entire row of LEDs to go out. Flashing and Flickering: • Overloaded power supply (too many feet/modules on a power supply) • Possible wire shorting out LEDs do not light but a meter reading at the end of the string reads the proper low voltage • LEDs possibly hooked up to high voltage, LEDs have been destroyed, however there is still continuity in the line.