1 / 30

Blocking Procedures

Blocking Procedures. Applying the Rules. Lesson Performance Objectives. 5/23/2012. 3_00. Upon completing this section, you should be able to demonstrate: How to apply proper blocking for Hand Operation for Dual Control Switches How to provide protection for main track authorization

havily
Télécharger la présentation

Blocking Procedures

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Blocking Procedures Applying the Rules Lesson Performance Objectives 5/23/2012 3_00 Upon completing this section, you should be able to demonstrate: How to apply proper blocking for Hand Operation for Dual Control Switches How to provide protection for main track authorization How to provide protection for equipment left on the main track How to provide protection for a change of direction How to provide protection for equipment that may not shunt the track. Image at 20% Alpha, right-aligned Text is present upon entry, no transition. Image of a hazard caused by failure to use proper blocking procedures 3_01 • Lesson 3 Applying the Rules • Apply proper blocking for Hand Operation for Dual Control Switches • Protect for main track authorization • Protection for equipment left on the main track • Protect for change of direction • Protection for equipment that may not shunt the track. Image

  2. Blocking Procedures Applying the Rules Hand Operation for Dual Control Switches 5/23/2012 3_01 Select each topic to review rules and procedures for proper protection for Hand Operation for Dual Control Switches. Once you have reviewed each topic, select Next to continue. All assets present upon entry. When learner select button, image/animation/video pop-up with audio or text will appear. Buttons with titles of topics 3_02 Out of Correspondence Switches Hand Operation of Dual Control Switches Train Entering Track within CTC or Manual Interlocking

  3. Blocking Procedures Applying the Rules Hand Operation for Dual Control Switches 5/23/2012 3_01_a When dual control switches in a control point do not indicate to be lined and locked, movement must be authorized past the Stop indication. The employee must be instructed to operate the dual control switches by hand. First, remember to: • Apply blocking to all switches at the location to ensure switch control requests are not initiated. • Apply blocking on any track segment that can be accessed through the out of correspondence switch. • If opposing signals at adjacent control points in either direction indicate to proceed on any track that can be accessed through the out of correspondence switch, arrange to place those signals in Stop position and apply blocking, or, advise the opposing train of movement to be made and wait until opposing train has taken the opposing signal before authorizing movement and instructing hand operation of the out of correspondence switch. Accessed by selecting corresponding button. Begin with image. Then fade out to present bullets. “Apply blocking to all switches at the location” “Apply blocking on any track segment that can be accessed through the out of correspondence switch” “Arrange to place those signals in Stop position and apply blocking, or, advise the opposing train of movement to be made” Image/diagram representing a dual control switch that is not lined or locked. 3_01 Out of Correspondence Switches Hand Operation of Dual Control Switches Train Entering Track within CTC or Manual Interlocking

  4. Blocking Procedures Applying the Rules Hand Operation for Dual Control Switches 5/23/2012 3_01_b A train or engine’s authorized limits will extend to adjacent control points in alldirections on all connected tracks when granted permission to operate a dual control switch by hand at a control point or manual interlocking unless specifically instructed otherwise. Do the following before granting permission to operate a dual control switch by hand: • Apply blocking to all dual control switches that are accessible by the train or engine in the limits described above. • Apply a track block to the affected tracks. Note: Do not grant a train crew permission to operate a dual control switch by hand that allows access to a track where Track and Time is in effect without first giving the train Track and Time on that track also. (see additional narration in screen area) Accessed by selecting corresponding button. Begin with image. Then fade out to present bullets. Present bullets one at a time. Image/diagram representing a dual control switch operated by hand 3_01 Out of Correspondence Switches Hand Operation of Dual Control Switches Train Entering Track within CTC or Manual Interlocking Grant permission as follows: (Train) at (location) has permission to operate (specific dual control switch(es)) by hand (for switching moves only, to double train together, etc.- OPTIONAL). Establish conflicting routes and authorize conflicting movements only as follows: • Communicate with train or engine crew first given permission to place the dual control switch in hand operation. • Issue track and time to both trains. • Issue track and time first to the train that has the switch in hand operation.

  5. Blocking Procedures Applying the Rules Hand Operation for Dual Control Switches 5/23/2012 3_01_c Except as provided in Rule 44.21, when a train is authorized to enter a track within CTC territory or Manual Interlocking limits, verify that there are no conflicting movements before granting authority. Do not grant authority contingent upon a condition. Protect the movement by applying track block(s) to the affected limits. The blocks must not be removed until the movement has entered the track and is protected by block signals. Accessed by selecting corresponding button. Begin with image. Then fade out to present bullets. Present bullets one at a time. Image/diagram of tracks clear of movement. 3_01 Out of Correspondence Switches Hand Operation of Dual Control Switches Train Entering Track within CTC or Manual Interlocking

  6. Blocking Procedures Applying the Rules Main Track Authorization 5/23/2012 3_02 Select each topic to review rules and procedures for protecting for main track authorization.. Once you have reviewed each topic, select Next to continue. All assets present upon entry. When learner select button, image/animation/video pop-up with audio or text will appear. Buttons with titles of topics 3_03 Protection Against Conflicting Movements Equipment that May Not Shunt the Track Protect Movement

  7. Blocking Procedures Applying the Rules Main Track Authorization 5/23/2012 3_02_a When issuing authority, provide protection against conflicting movements. All assets present upon entry. When learner select button, image/animation/video pop-up with audio or text will appear. Image/diagram of track with conflicting movements. 3_02 Protection Against Conflicting Movements Equipment that May Not Shunt the Track Protect Movement

  8. Blocking Procedures Applying the Rules Main Track Authorization 5/23/2012 3_02_b In ABS limits, unless authorized to move in both directions, work between or yard limits, establish absolute protection against following trains for : • Single unit light engines, or • Short wheelbase equipment that shunts the track. All assets present upon entry. When learner select button, image/animation/video pop-up with audio or text will appear. Image of single unit light engine 3_02 Protection Against Conflicting Movements Equipment that May Not Shunt the Track Protect Movement

  9. Blocking Procedures Applying the Rules Main Track Authorization 5/23/2012 3_02_c If applicable, before transmitting OCS, protect the movement by providing blocking or markers on the control machine to prevent movement into the authorized limits while OCS is in effect. All assets present upon entry. When learner select button, image/animation/video pop-up with audio or text will appear. Image/diagram of OCS in effect (?) 3_02 Protection Against Conflicting Movements Equipment that May Not Shunt the Track Protect Movement

  10. Blocking Procedures Applying the Rules Parked Equipment on the Main Track 5/23/2012 3_03 Select the topic to review rules and procedures for protecting parked equipment on the main track. Once you have reviewed each topic, select Next to continue. All assets present upon entry. When learner select button, image/animation/video pop-up with audio or text will appear. Buttons with titles of topics 3_04 Protection of Equipment Left on Main Track

  11. Blocking Procedures Applying the Rules Parked Equipment on the Main Track 5/23/2012 3_03_a Provide protection before allowing a crew of a train to leave equipment on the main track without flag protection. • Within CTC, OCS, manual interlocking limits, or Track Permit territory, apply a restrictive tag or block to the section of track where equipment is left on the main track. • Within double track territory where Track Permit or TWC is not in effect, provide protection by placing a restrictive tag or block within or at the entrance of the limits of double track. Note: If a restrictive tag or block is not available, set the signals governing entrance to the limits to display Stop indication and apply blocking devices to prevent signals from lining into the limits. All assets present upon entry. When learner select button, image/animation/video pop-up with audio or text will appear. Image/Diagram of track segment with unattended equipment’ Image/Diagram of entrance signals displaying stop 3_04 Protection of Equipment Left on Main Track

  12. Blocking Procedures Applying the Rules Change of Direction 5/23/2012 3_04 Select each topic to review rules and procedures for protecting for change of direction. Once you have reviewed each topic, select Next to continue. All assets present upon entry. When learner select button, image/animation/video pop-up with audio or text will appear. Buttons with titles of topics 3_05 Reverse Movement

  13. Blocking Procedures Applying the Rules Change of Direction 5/23/2012 3_04_a Before granting permission to perform switching or to change direction to a movement that has stopped while the trailing end is between the outer opposing absolute signals of a control point or manual interlocking, cancel all programmed switch and signal requests and block all affected switches and track segments to be used. All assets present upon entry. When learner select button, image/animation/video pop-up with audio or text will appear. Image/diagram of trains approaching a conflicting route. 3_05 Reverse Movement

  14. Blocking Procedures Applying the Rules Change of Direction 5/23/2012 3_04_b Before granting permission for a reverse movement where overlapping authorities exist, provide protection against conflicting movements. Permission for a reverse movement within CTC or manual interlocking limits may be granted to a train only if one of the following conditions is satisfied: • The next controlled signal to the rear for a following movement is set to display a Stop indication, the track is clear of trains to the controlled signal and a block or restrictive tag is placed in the track segment where the movement will occur. • A following train which has passed the last controlled signal to the rear has been stopped and instructed to remain stopped until the reverse movement is completed and a block or restrictive tag is placed in the track segment where the movement will occur. All assets present upon entry. When learner select button, image/animation/video pop-up with audio or text will appear. Image/diagram of train moving in reverse approaching an overlapping authority 3_05 Reverse Movement

  15. Blocking Procedures Applying the Rules Single Locomotive Movements 5/23/2012 3_05 Select each topic to review rules and procedures for protecting for single locomotive movements. Once you have reviewed each topic, select Next to continue. All assets present upon entry. When learner select button, image/animation/video pop-up with audio or text will appear. Buttons with titles of topics 3_06 Authority to Pass a Stop Signal Picking up a Crew Member CTC Territory

  16. Blocking Procedures Applying the Rules Single Locomotive Movements 5/23/2012 3_05_a Before granting a train verbal authority to pass a signal displaying a Stop indication, as outlined in GCOR Rule 9.12.1: • Block switches and derails to prevent movement requests. Blocking must be maintained until movement has completely fouled the control point. • Apply blocking or restrictive tag on the track segment beyond the affected control point and maintain until all trains authorized under provisions of Rule 9.12.1 or 9.12.2 have occupied the track segment beyond the affected control point, and Have received a proceed signal at the next control point. Have occupied the next control point. or Have reached the end of CTC or Manual Interlocking limits. All assets present upon entry. When learner select button, image/animation/video pop-up with audio or text will appear. Diagram of a train passing a stop signal 3_06 Authority to Pass a Stop Signal Picking up a Crew Member CTC Territory

  17. Blocking Procedures Applying the Rules Single Locomotive Movements 5/23/2012 3_05_b Before granting permission for a back up movement to pick up a crew member: • Place a block or restrictive tag in the segment where the movement will occur. In addition, where overlapping authorities exist provide protection against conflicting movements. All assets present upon entry. When learner select button, image/animation/video pop-up with audio or text will appear. Image/diagram of a train in back up movement preparing to pick up a crew member 3_06 Authority to Pass a Stop Signal Picking up a Crew Member CTC Territory

  18. Blocking Procedures Applying the Rules Single Locomotive Movements 5/23/2012 3_05_c At a signal displaying a stop indication, before authorizing the train to proceed, the control operator must know that the route is properly lined and no conflicting movement is occupying or authorized to enter the track between that signal and the next absolute signal governing movement or the end of CTC where applicable. Exception: When the control operator has stopped a conflicting movement, he may then authorize another train to proceed in the same limits, advising both crews of movement to be made. All assets present upon entry. When learner select button, image/animation/video pop-up with audio or text will appear. 3_06 Authority to Pass a Stop Signal Picking up a Crew Member CTC Territory

  19. Blocking Procedures Applying the Rules Scenario Exercise 5/23/2012 3_06 Now that you have reviewed some of the rules governing blocking requirements and processes, let’s check how well you can implement them. You will be presented with scenarios dealing with Hand Operation for Dual Control Switches, main track authorization, parked equipment on the main track, change of direction, and single locomotive movements. Each of the five images is a button that will lead the learner to a scenario. The learner can scan through the images using the left and right arrow. Once the learner enters the scenario screen, they will be prompted with a situation concerning protection of one of the five issues mentioned, and instructions. They will make decisions based on this information and the established procedures from the lesson. The learner will have an opportunity to recover if the situation permits. 5 images, each representing a scenario Intra-screen navigation arrows 3_06_a 3_06_b 3_06_c 3_06_d Title of Scenario-Based Activity

  20. Blocking Procedures Applying the Rules Scenario Exercise 5/23/2012 3_06_a1 n/a All assets present upon entry. Learner will select arrow to move forward to the response screen. Image that is present 3_06_a2 Read the prompt then select the arrow to continue. Hand Operation for Dual Control Switches You must authorize the BNSF 4632 East by the signal at MP95.7 instructing them to take the switch on hand and line it for their move, Main 2 to Main 2 eastward. Only one switch in the OS is indicating out of correspondence. (Non-ICS) Where must you place your blocking and or restrictive tags before you can authorize them by the signal?

  21. Blocking Procedures Applying the Rules Scenario Exercise 5/23/2012 3_06_a2 Learner will make a selection and immediate feedback will be provided. We need the correct answer and appropriate feedback specific to each response. The learner will have 4 chances to attempt the question. They will be redirected to the 3_06 from the “correct” feedback” screen or auto returned after their 4 attempt. 4 images that are on the screen Feedback screens Main Hand Operation for Dual Control Switches You must authorize the BNSF 4632 East by the signal at MP95.7 instructing them to take the switch on hand and line it for their move, Main 2 to Main 2 eastward. Only one switch in the OS is indicating out of correspondence. (Non-ICS) Where must you place your blocking and or restrictive tags before you can authorize them by the signal? A. C. B. D.

  22. Blocking Procedures Applying the Rules Scenario Exercise 5/23/2012 3_06_b1 n/a All assets present upon entry. Learner will select arrow to move forward to the response screen. Image that is present 3_06_b2 Read the prompt then select the arrow to continue. Main Track Authorization The BNSF 9238 has requested to take the crossover switches on hand at MP 1782.7 (switches 1A and 1B) to perform switching. How will you protect this?

  23. Blocking Procedures Applying the Rules Scenario Exercise 5/23/2012 3_06_b2 Learner will make a selection and immediate feedback will be provided. We need the correct answer and appropriate feedback specific to each response. The learner will have 4 chances to attempt the question. They will be redirected to the 3_06 from the “correct” feedback” screen or auto returned after their 4 attempt. 4 images that are on the screen Feedback screens Main Main Track Authorization The BNSF 9238 has requested to take the crossover switches on hand at MP 1782.7 (switches 1A and 1B) to perform switching. How will you protect this? A. C. B. D.

  24. Blocking Procedures Applying the Rules Scenario Exercise 5/23/2012 3_06_c1 n/a All assets present upon entry. Learner will select arrow to move forward to the response screen. Image that is present 3_06_c2 Read the prompt then select the arrow to continue. Parked Equipment on the Main Track Cars have been set out on the siding at Baring. How will you protect this?

  25. Blocking Procedures Applying the Rules Scenario Exercise 5/23/2012 3_06_c2 Learner will make a selection and immediate feedback will be provided. We need the correct answer and appropriate feedback specific to each response. The learner will have 4 chances to attempt the question. They will be redirected to the 3_06 from the “correct” feedback” screen or auto returned after their 4 attempt. 4 images that are on the screen Feedback screens Main Parked Equipment on the Main Track Cars have been set out on the siding at Baring. How will you protect this? C. A. Place a track block on the affected siding. Place a restrictive tag on the affected siding. B. D. Place switch blocks to prevent entry to the affected siding. Issue a Form C stating that the siding is blocked with cars.

  26. Blocking Procedures Applying the Rules Scenario Exercise 5/23/2012 3_06_d1 n/a All assets present upon entry. Learner will select arrow to move forward to the response screen. Image of conductor communicating to dispatcher 3_06_d2 Read the prompt then select the arrow to continue. Change of Direction The BNSF 5394 East has requested permission to make a reverse move between switches at Hebron in ABS territory. The BNSF 444 East has an overlapping authority and has been stopped. Is there anything else that needs to be done to protect this?

  27. Blocking Procedures Applying the Rules Scenario Exercise 5/23/2012 3_06_d2 Learner will make a selection and immediate feedback will be provided. Feedback A: Yes, place a track block. Feedback B: Yes, place a track block. Feedback C: No, by stopping the BNSF 444 East you have protected the reverse move. The learner will have 3 chances to attempt the question. They will be redirected to the 3_06 from the “correct” feedback” screen or auto returned after their 4 attempt. 3 images that are on the screen Feedback screens Main Change of Direction The BNSF 5394 East has requested permission to make a reverse move between switches at Hebron in ABS territory. The BNSF 444 East has an overlapping authority and has been stopped. Is there anything else that needs to be done to protect this? A. B. C.

  28. Blocking Procedures Applying the Rules Scenario Exercise 5/23/2012 3_06_e1 n/a All assets present upon entry. Learner will select arrow to move forward to the response screen. Image that is present 3_06_e2 Read the prompt then select the arrow to continue. Single Locomotive Movements The BNSF 8255 is a single unit light engine operating in CTC. How do you protect this?

  29. Blocking Procedures Applying the Rules Scenario Exercise 5/23/2012 3_06_e2 Learner will make a selection and immediate feedback will be provided. Feedback A: Yes, place a track block. Feedback B: Yes, place a track block. Feedback C: No, by stopping the BNSF 444 East you have protected the reverse move. The learner will have 3 chances to attempt the question. They will be redirected to the 3_06 from the “correct” feedback” screen or auto returned after their 4 attempt. 4 images that are on the screen 3_07 Single Locomotive Movements The BNSF 8255 is a single unit light engine operating in CTC. How do you protect this? Track Block Restrictive Tag C A No Extra Protection is Required Device Blocks B D

  30. Blocking Procedures Applying the Rules Lesson Summary 5/23/2012 3_07 Congratulations. You have completed Lesson 2: Overview of Blocking Procedures. You should now be able to: Apply proper protection for Hand Operation for Dual Control Switches Protect for main track authorization Protect for parked equipment on the main track Protect for change of direction Protect for single locomotive movements. Image at 20% Alpha, right-aligned Text is present upon entry, no transition. Lesson completion image – like a target with an arrow in the bull’s eye n/a • Lesson Summary • Now that you have completed the Applying the Rules lesson, you should be able to: • Apply proper protection for Hand Operation for Dual Control Switches • Protect for main track authorization • Protect for parked equipment on the main track • Protect for change of direction • Protect for single locomotive movements Image

More Related