1 / 23

Gypsum

Gypsum. Sulfate Minerals. More than 100 different minerals, separated into hydrous (with H 2 O) or anhydrous (without H 2 O) groups Gypsum (CaSO 4 *2H 2 O) and anhydrite (CaSO 4 ) are the most common of the sulfate minerals

hocking
Télécharger la présentation

Gypsum

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Gypsum

  2. Sulfate Minerals • More than 100 different minerals, separated into hydrous (with H2O) or anhydrous (without H2O) groups • Gypsum (CaSO4*2H2O) and anhydrite (CaSO4) are the most common of the sulfate minerals • Gypsum typically forms in evaporitic basins – a polymorph of anhydrite (g-CaSO4) forms when the gypsum is later dehydrated)

  3. Halide Minerals • Minerals contianing halogen elements as dominant anion (Cl- or F- typically) • Halite (NaCl) and Sylvite (KCl) form in VERY concentrated evaporitic waters – they are extremely soluble in water, indicate more complete evaporation than does gypsum • Fluorite (CaF2) more typically occurs in veins associated with hydrothermal waters (F- in hydrothermal solutions is typically much higher – leached out of parent minerals such as biotites, pyroxenes, hornblendes or apatite)

  4. Gypsum formation can demarcate ancient seas that dried up (such as the inland seas of the Michigan basin) or tell us about the history of current seas which have dried up before (such as the Mediterranean Sea)

  5. Halite Structure • NaCl  Na+ (gray) arranged in CCP with Cl- (red) at edges and center (in octahedral cavities)

  6. Flourite structure • CaF2 Ca2+ (gray) arranged in CCP, F- ions (red) inside ‘cage’

  7. Sulfate Minerals II • Barite (BaSO4), Celestite (SrSO4), and Anglesite (PbSO4) are also important in mining. • These minerals are DENSE Barite =4.5, Anglesite = 6.3 (feldspars are ~2.5)

  8. Ba, Pb, Sr – very low SO42- Barite, Celestite, Anglesite • Metals bond with sulfate much more easily, and thus are generally more insoluble – they do not require formation in evaporitic basins • What do they indicate then? Lots of SO42- Not very much Ba, Sr, Pb

  9. Just silica… • Chert – extremely fine grained quartz • Forms as nodules in limestone, recrystallization of siliceous fossils • Jasper – variety with hematite inclusions  red • Flint – variety containing organic matter  darker color • Chalcedony – microcrystaliine silica (very similar to low quartz, but different – it is yet uncertain how different…)  typically shows banding, often colored to form an agate (rock formed of multiple bands of colored chalcedony) • Jasper – variety colored with inclusion of microcrystsalline oxides (often iron oxides = red) • Opal – a hydrogel (a solid solution of water in silica) – forms initially as water + silica colloids, then slowly the water diffuses into the silica  making it amorphous (no XRD pattern!) • Some evidence opal slowly recrystallizes to chalcedony

  10. Opal - Gemstone

  11. Agates

  12. Oxides - Oxyhydroxides • FeOOH minerals  Goethite or Limonite (FeOOH)  important alteration products of weathering Fe-bearing minerals • Hematite (Fe2O3)  primary iron oxide in Banded Iron Formations • Boehmite (AlOOH)  primary mineral in bauxite ores (principle Al ore) which forms in tropical soils • Mn oxides  form Mn nodules in the oceans (estimated they cover 10-30% of the deep Pacific floor) • Many other oxides important in metamorphic rocks…

  13. Mn oxides - oxyhydroxides • Mn exists as 2+, 3+, and 4+; oxide minerals are varied, complex, and hard to ID • ‘Wad’  soft (i.e. blackens your fingers), brown-black fine-grained Mn oxides • ‘Psilomelane’  hard (does not blacked fingers) gray-black botroyoidal, massive Mn oxides • XRD analyses do not easily distinguish different minerals, must combine with TEM, SEM, IR spectroscopy, and microprobe work

  14. Mn Oxide minerals (not all…) • Romanechite Ba.66(Mn4+,Mn3+)5O10*1.34H2O  Psilomelane • Pyrolusite MnO2 • Ramsdellite MnO2 • Nsutite Mn(O,OH)2 • Hollandite Bax(Mn4+,Mn3+)8O16 • Cryptomelane Kx(Mn4+,Mn3+)8O16 • Manjiroite Nax(Mn4+,Mn3+)8O16 • Coronadite Pbx(Mn4+,Mn3+)8O16 • Todorokite (Ca,Na,K)X(Mn4+,Mn3+)6O12*3.5H2O • Lithiophorite LiAl2(Mn2+Mn3+)O6(OH)6 • Chalcophanite ZnMn3O7*3H2O • Birnessite (Na,Ca)Mn7O14*2.8H2O • Vernadite MnO2*nH2O • Manganite MnOOH • Groutite MnOOH • Feitknechtite MnOOH • Hausmannite Mn2+Mn23+O4 • Bixbyite Mn2O3 • Pyrochroite Mn(OH)2 • Manganosite MnO Wad

  15. Al oxides • Aluminum occus in economic deposits principally as bauxite • Bauxite is a mixture of Al oxides and oxyhydroxides: • Diaspore - AlO(OH) • Gibbsite - Al(OH)3 • Böhmite - AlO(OH) • Al is a residual phase and bauxite occurs where weathering is extreme and thick layers of aluminum oxyhydroxide are left over

  16. Iron Oxides • Interaction of dissolved iron with oxygen yields iron oxide and iron oxyhyroxide minerals • 1st thing precipitated  amorphous or extremely fine grained (nanocrystaliine) iron oxides called ferrihydrite O2 Fe2+

  17. Ferrihydrite • Ferrihydrite (Fe5O7OH*H2O; Fe10O15*9H2O  some argument about exact formula) – a mixed valence iron oxide with OH and water

  18. Goethite • Ferrihydrite recrystallizes into Goethite (a-FeOOH) • There are other polymorphs of iron oxyhydroxides: • Lepidocrocite g-FeOOH • Akaganeite b-FeOOH

  19. Iron Oxides • Hematite (Fe2O3) – can form directly or via ferrihydrite  goethite  hematite • Red-brown mineral is very common in soils and weathering iron-bearing rocks

  20. Magnetite (Fe3O4) – Magnetic mineral of mixed valence  must contain both Fe2+ and Fe3+  how many of each?? • ‘Spinel’ structure – 2/3 of the cation sites are octahedral, 1/3 are tetrahedral

  21. Banded Iron Formations (BIFs) • HUGE PreCambrian formations composed of hematite-jasper-chalcedony bands • Account for ~90% of the world’s iron supply • Occur only between 1.9 and 3.8 Ga  many sites around the world  Hammersley in Australia, Ishpeming in Michigan, Isua in Greenland, Carajas in Brazil, many other sites around the world…

  22. BIFs and bacteria • Early earth did not have free O2, as microbial activity became widespread and photosynthetic organisms started generating O2, the reduced species previously stable (without the O2) oxidized – for Fe this results in formation of iron oxide minerals

More Related