1 / 20

Redesign of Lotus Europa Front Suspension

Summary

huey
Télécharger la présentation

Redesign of Lotus Europa Front Suspension

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

    1. Redesign of Lotus Europa Front Suspension ME 450: Finite Element Analysis Spring 2007 Presented by: Bart Sudhoff, Zachary Lightner, Jim Milligan, Brian Schludecker, David Giles Dr. Nema 4/30/2007

    2. Summary & Introduction Redesign Front Suspension Upper Control Arm Top Speed Increase: 120 to 200 MPH Design Issues: New weight of car due to increased engine size New handling characteristics

    3. Original Design Built in 1970 1470cc OHV 4 Cylinder Engine 78HP Front Wheel Drive 4-Speed Transmission Curb Weight: 1320-1570lbs Top Speed 120 MPH

    4. New Design Engine: Lexus V8 4.0L Quad Cam Transmission: Porsche 5-Speed Suspension: New Design of Lower/Upper Control Arms, Springs, Shocks Factor of Safety of 5 Light Weight Minimal Deformation

    5. Theoretical Background Decomposition of model into stiffness, force matrices Solution in form of nodal displacement matrix 4-node tetrahedral element displacement solution

    6. Model Details Upper and Lower Control arms modeled using Pro/E Constraints Fix about the mounting holes Forces applied at ball joint

    7. Model Details

    8. Model Details

    9. Model Details

    10. Results 2 thick arm Stress - 20.06 MPa Deformation - .102 mm Safety Factor Greater than 10

    12. Results 1.75 thick arm Stress - 25.1 MPa Deformation - .128 mm Safety Factor Greater than 5

    14. Results 1.75 thick arm with relief Stress - 18.9 MPa. Deformation - .131 mm Safety Factor Greater than 5

    16. Results 1.5 thick arm with relief Stress - 24.4 MPa Deformation - .184 mm Safety Factor Greater than 5

    18. Results 1.5 thick arm with relief Vertical Bump Stress - 3.82 MPa Deformation - .0229mm Safety Factor Greater than 10 Rebound Stress - 14 MPa Deformation - .106mm. Safety Factor Greater than 10

    21. Conclusion Chose 1 control arm with relief cuts Passed factor of safety tests has allowable deformation Will allow car to go 200 mph

More Related