1 / 15

PEWAG CHAINS INSTALLATION

PEWAG CHAINS INSTALLATION. Should look like this when finished. Step 1: Lay the chains out neatly next to the rear tire. Step 2: Inspect chains for damage. Step 3: Drape chains over tire one side higher than the other. Step 4: Connect rear hook to single link in final ring.

illiana-aguilar
Télécharger la présentation

PEWAG CHAINS INSTALLATION

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. PEWAG CHAINS INSTALLATION

  2. Should look like this when finished.

  3. Step 1: Lay the chains out neatly next to the rear tire. Step 2: Inspect chains for damage

  4. Step 3: Drape chains over tire one side higher than the other.

  5. Step 4: Connect rear hook to single link in final ring.

  6. Step 5: Connect front hook to final ring Step 6: Pull on tension chain

  7. Step 7: Pull down single link between two taped links. You should be able to reach this one for initial tension. After driving you may be able to connect to the next link or two.

  8. Step 8: Connect tension cam through single link. Keep extra chain away from cam.

  9. Step 9: Lock tension cam with big ring, notice the flat spot.

  10. Step 10: Wrap extra chain back on itself a couple of times

  11. Keep going up and around

  12. Step 11: Attach tension spring clip back across to tension chain.

  13. Final inspection: Chains should be tight. To tighten more unclip spring and cam. Try to put cam through link further up the chain. Repeat steps to clip spring.

  14. THINGS TO REMEMBER #1. MAX SPEED = 35 MPH! Easy Acceleration #2. NEVER DRIVE ON BROKEN CHAINS! #3. Driver should check chains every time you stop. #4. Bring spare chain and blocks for emergency swap out. #5. Consider running on cables in light snow conditions

More Related