SlideServe
Télécharger Obtenir Pro
Menu
Accueil Pro
Préférences
ApparenceLight Aide et commentaires
© SlideServe · v2026

Science Fair Project

iman avatar
iman
12 diapositives · 282 Views · Jul 22, 2014

This science fair project investigates how different ramp materials—plastic, cardboard, and metal—affect the speed of a toy car. By measuring the time taken for the car to travel down each ramp, we aim to determine which surface yields the fastest speed. Using controlled variables such as car weight and ramp angle, we hypothesize that metal ramps will facilitate faster travel due to their smoother surface. This project not only explores the physics of motion but also highlights the importance of material properties in design.

Science Fair Project - slide 1
01 / 12Science Fair Project
1 / 17

Télécharger la présentation

Science Fair Project
Une image / un lien ci-dessous est fourni (tel quel) pour télécharger la présentation

Politique de téléchargement : le contenu du site vous est fourni TEL QUEL pour votre information et votre usage personnel ; il ne peut être vendu, concédé sous licence ni partagé sur d’autres sites sans l’accord de son auteur.Le contenu vous est fourni TEL QUEL, pour votre information et votre usage personnel uniquement. Téléchargez la présentation en cliquant sur ce lien. Lors du téléchargement, si vous ne parvenez pas à télécharger une présentation, l’éditeur a peut-être supprimé le fichier de son serveur.Pendant le téléchargement, si vous ne parvenez pas à obtenir une présentation, le fichier a peut-être été supprimé par l’éditeur.

F I N

Plus de contenu associé

Transcription de la présentation

  1. Science Fair Project Physics Ramp madness David Martinez Cydeni Carter

  2. Statement of the Problem How does plastic, cardboard, and metal affect the speed of the car?

  3. Project Overview We are going to test how metal, plastic, and cardboard ramps will affect the speed of a toy car. Then we will see what affects it the most and why.

  4. Variables • Independent variable: surface • Dependent variable: speed of car measured in seconds per foot • Constant variables: speed of car, weight of car, length of surface, size of wheels, distance from start to finish, angle of ramp, width, and height • Control group: plastic

  5. Hypothesis If the car is on a metal ramp then it will travel faster then it proves that the surface is faster because it is smoother than the others.

  6. Materials • One toy car • 3 ramps made out of metal, plastic, and cardboard that are 2.5 inches and I meter long • Stopwatch • Camera with video • goggles

  7. Procedure • Gather all materials needed and safety precautions • Put goggles on • Cut plastic, metal, and plastic so that its 2.5 inches wide and 1 meter long • Set up the ramps at an angle of 30 degrees • Record time it took for each to get to the finish line • Make chart showing time of cars

  8. The Toy Car David Making the plastic ramp Photos The Card Board Ramp Cydeni Doing the Card Board Test Toy Car

  9. Data/ObservationsAnalyzes

  10. Conclusion We discovered a lot after this experiment. We discovered that metal helped a car go faster but the cardboard made it go slower.

  11. Possible Experimental Errors We think that maybe the floor slowed it down because it crashed with the floor when it got off the ramp.

  12. Applications and Recommendations The car ramps had different textures witch impacted the speed. Next time we might choose better materials to choose from.