1 / 18

Ch3: Vertical alignment, p.265-286

Ch3: Vertical alignment, p.265-286. You learned how to lay out a vertical curve, PVC, PVI, and PVT for given grades in CE113 Surveying. If you forgot, please review Chapter 21 of your survey book by McCormac. After this lecture you will be able to:.

ina-burks
Télécharger la présentation

Ch3: Vertical alignment, p.265-286

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Ch3: Vertical alignment, p.265-286 You learned how to lay out a vertical curve, PVC, PVI, and PVT for given grades in CE113 Surveying. If you forgot, please review Chapter 21 of your survey book by McCormac. After this lecture you will be able to: • Explain why the criteria for determining the length of a crest and a sag curve are different • Identify a crest and a sag curve • Describe the steps for determining the length of a vertical curve • Lay out a vertical curve (Self review)

  2. Criteria for determining the length of the vertical curve • The main criteria are: • Provision of stopping sight distance (as defined by AASHTO) • Adequate drainage • Comfortable in operation • Pleasant appearance For both crest and sag vertical curves For sag curves only Roller coaster and hidden dip effects need to be avoided. When a vertical curve ahead is too small, the road may appear sharply bent.

  3. Crest vertical curves

  4. Two cases of SSD on crest vertical curves SSD > Length of V-curve SSD < Length of V-curve Eq.3-42 Eq.3-41

  5. Derivation of crest vertical curve length formulas: S > L Let g represent the difference between the gradient of the sight line and the gradient G1. Then, A – g will be the difference between the gradient of the sight line and the gradient G2. g A g (A - g) To find the slope of the sight line that will make S a minimum, set dS/dg = 0. Substitute g in S equation above and get

  6. Derivation of crest vertical curve length formulas: S < L Use the basic offset property of the parabolic curve, y = ax2. As long as the point of interest is within the parabola, we can use this. We know the mid-curve offset E = AL/800 (eq. 16-16) and this happens when x = L/2. So if you have the curve offset y = H1 with x = S1, we have: E and Solve for S1 and S2, and sum them to get S.

  7. Graphical representation of minimum crest vertical lengths (Exhibit 3-71: Design Controls for Crest VC)

  8. Sag vertical curves The minimum length of sag vertical curves is controlled by (1) sight distance provided by the headlight (at night: during the day you can see the vehicles in the opposite direction), (2) rider comfort, (3) control of drainage, and (4) general appearance. H = 2 ft (headlight height), β = 1degree (divergence angle)

  9. Two cases of SSD on sag vertical curves For S > L For S < L H = 2 ft, the height of the headlight above the ground

  10. Graphical representation of minimum sag vertical lengths (Exhibit 3-74: Design Controls for Sag VC)

  11. 3 other criteria for sag vertical curves • Comfort criteria (minimum length), usually 50% of the SSD requirement: u = design speed, mph • Drainage criteria (maximum length within which a grade must be established) when curbs are used (Know how to read the Drainage maximum line in Exhibit 3-74): A minimum grade of 0.3% must be provided within 50 ft of the level point of the curve. • General appearance (minimum length): L = 100A

  12. Another K value… The minimum lengths of the crest and sag curves which are computed based on stopping sight distance (S < L cases)can be expressed like: L = KA To make it easier to get the value from the minimum curve length tables or charts. Crest vertical curves: Sag vertical curves:

  13. K-value for crest vertical curves a. Rate of vertical curvature, K, is the length of curve per percent algebraic difference in intersecting grades (A). K=L/A

  14. K-value for sag vertical curves a. Rate of vertical curvature, K, is the length of curve per percent algebraic difference in intersecting grades (A). K=L/A

  15. Sight Distance at Undercrossings, p.277 • Sight distance on the highway through a grade separation should be at least as long as the minimum stopping sight distance and preferably longer.

  16. h1 = 8 ft for a truck driver, h2 = 2.0 ft for the taillights of a vehicle. Why do we use the truck driver’s eye height here?

  17. General controls for vertical alignment, p.279 • A smooth gradeline with gradual changes should be sought. • The “roller-coaster” or “hidden-dip” type of profile should be avoided. • Undulating gradelines should be avoided. • A “broken-back” gradelines should be avoided. • On longer grades, it is recommended to have the steepest grade at the bottom and flatten the grades near the top of the ascent or to break the sustained grade by short intervals of flatter grade instead of proving a uniform sustained grade. • Where at-grade intersections occur, reduce the grade through the intersection. • Sag vertical curves should be avoided in cuts unless adequate drainage can be provided.

More Related