1 / 13

Steel Bumper Tooling Operations

Steel Bumper Tooling Operations. STEEL BUMPER. 1. 2. 3. Bumper Centre – Blanking Operation. Feed Direction for Auto Feed Post Operation. Coil. Blank Operation. Bumper Centre – Draw Operation. Single Action Draw Tool to full depth. Bumper Centre – Trim & Pierce Operation.

iola
Télécharger la présentation

Steel Bumper Tooling Operations

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Steel Bumper Tooling Operations

  2. STEEL BUMPER 1 2 3

  3. Bumper Centre – Blanking Operation Feed Direction for Auto Feed Post Operation Coil Blank Operation

  4. Bumper Centre – Draw Operation Single Action Draw Tool to full depth

  5. Bumper Centre – Trim & Pierce Operation Bars for stability Lip around aperture laid out ready for re-strike Trim and Pierce Tool

  6. Bumper Centre – Trim & Re-strike Operation Re-Strike and Trim Tool – (to tighten radii)

  7. Bumper Centre – Trim & Pierce Operation Cam Pierce (Lower Bumper Mounting Holes) Trim and Pierce Tool

  8. Bumper Outer – Blank (No Tool Required) Feed Direction for Auto Feed Post Operation Coil 1.Blank – No tool required straight off coil (guillotine)

  9. Bumper Outer - Forming Operation 2.Forming Operation – Double attached Tool Single Action

  10. Bumper Outer – Trim Cam Trim & Pierce operation Cam Trim only if Flange Required 4.Trim / Cam Trim and Pierce Operation

  11. Bumper Outer – Re-Strike & Cam Flange Operation 5.Re-Strike and Cam Flange Operation (If Flange required)

  12. 1) Price for a press tool which will • produce a part of 1500mm x 500mm at a thickness of 2mm? • Find out the machine tonnage required? • Find out the cutting force?

  13. Bumper Outer – Trim & Pierce Operation 3.Trim and Pierce Operation

More Related