1 / 19

Fast determination of earthquake source parameters from strong motion records:

Fast determination of earthquake source parameters from strong motion records: Mw, focal mechanism, slip distribution B. Delouis, J. Charlety, and M. Vallée Géosciences Azur CNRS/IRD Université de Nice – Sophia Antipolis. EGU General Assembly 13-18 April 2008 Vienna Austria.

iolana
Télécharger la présentation

Fast determination of earthquake source parameters from strong motion records:

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Fast determination of earthquake source parameters from strong motion records: Mw, focal mechanism, slip distribution B. Delouis, J. Charlety, and M. Vallée Géosciences Azur CNRS/IRD Université de Nice – Sophia Antipolis EGU General Assembly 13-18 April 2008 Vienna Austria

  2. Fast determination of earthquake source parameters fromstrong motion records: Mw, focal mechanism, slip distribution B. Delouis, J. Charlety, and M. Vallée Géosciences Azur CNRS/IRD Université de Nice – Sophia Antipolis

  3. Overview and objectives: Step 2 Step 1 Step 3 All this using near source records

  4. Earthquake detection and localisation Early warning "Early P-wave magnitude" A few seconds Step 1 Moment magnitude Mw 2 minutes Rapid source parameters Step 2 15 minutes Focal mechanism Step 3 40 minutes Slip distribution Where are we in the time scale of Seismic Warning ? Earthquake origin time Global CMT solutions: > 1 hour TIME

  5. Step 1: Fast Moment Magnitude Mw

  6. 4 p ra3 r W0 M0 = ——————— Rp cor_free_surf Classical way to determine Mw from the far-field body waves Far field (distance >> rupture dimension) W0 = spectral level at low frequency Valid for separated far-field waves (P and S) only. This simple relation cannot be used when P, S, and near-field waves are intermixed as it is the case near the source for large earthquakes. (Kanamori 1977)

  7. A new approach: Using synthetic displacement spectra generated for extended sources in the near-field domain

  8. virtual stations

  9. Validation with 22 earthquakes worldwide with Mw ranging from 3.9 to 7.7 Using a time window of 80 sec after origin time

  10. Step 2: Fast Focal Mechanism using a line source model

  11. If magnitude < 5.5  point source Parameters to be inverted for: Fault strike, dip, rake and … If magnitude > 5.5  finite line source 5.5 < M < 6 6 < M < 7 7 < M < 7.5 M > 7.5

  12. N 100 km Example 1: 1999 Chi-Chi earthquake Mw 7.6

  13. 100 km Example 2: 1999 Izmit Mw 7.6

  14. 50 km Example 3: 2000 Tottori earthquake Mw 6.7 N The method has been validated for 19 earthquakes worldwide of moment magnitude 3.6 to 8.0

  15. Step 3: Fast Slip Inversion (under development and validation)

  16. : hypocenter

  17. 1999 Chi-Chi earthquake Mw 7.6 Test of standardized slip inversion NNE East-dipping rupture plane SSW : hypocenter NNE SSW

  18. Conclusions • It is possible to determine a moment magnitude Mw from near source stations at distance < 100 km with an acceptable degree of accuracy (+/- 0.2), over a very wide range of magnitude (4 to 8). Expected time scale: < 2 min after origin time • The focal mechanism can be retrieved in the same conditions using a simple line source model. Expected time scale: < 15 min after origin time • A fast and automated slip inversion is feasible (presently under development and validation). Expected time scale: < 45 min after origin time

More Related