1 / 15

An Ultra-Wide-Band 0.4 – 10-GHz LNA in 0.18-μm CMOS

An Ultra-Wide-Band 0.4 – 10-GHz LNA in 0.18-μm CMOS. Ke-Hou Chen; Jian-Hao Lu; Bo-Jiun Chen; Shen-Iuan Liu; Circuits and Systems II: Express Briefs, IEEE Transactions on Volume 54, Issue 3, March 2007. Adviser : Zhi-Ming Lin Postgraduate : Chia-Wei Chang. Outline. Introduction

irina
Télécharger la présentation

An Ultra-Wide-Band 0.4 – 10-GHz LNA in 0.18-μm CMOS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. An Ultra-Wide-Band 0.4–10-GHz LNA in 0.18-μm CMOS Ke-Hou Chen; Jian-Hao Lu; Bo-Jiun Chen; Shen-Iuan Liu; Circuits and Systems II: Express Briefs, IEEE Transactions on Volume 54, Issue 3, March 2007 Adviser : Zhi-Ming Lin Postgraduate : Chia-Wei Chang

  2. Outline • Introduction • Circuit Description • Experimental Results • Conclusion • Reference

  3. Introduction • Unlike narrow-band systems mentioned above, ultra-wide-band (UWB) systems are an emerging wireless technology capable of transmitting data over a wide frequency band for short ranges with low power and even higher data rate. • The amplifier must meet several stringent requirements, such as broad-band input matching to minimize the return loss, sufficient gain to suppress the noise of a mixer, low noise figure (NF) to enhance receiver sensitivity, low power consumption to increase battery life, and small die area to reduce the cost.

  4. Circuit Description

  5. Experimental Results Measured S-parameters.

  6. Measured NF.

  7. Microphotograph of the LNA.

  8. Conclusion • A UWB CMOS LNA has been implemented in a 0.18- μm CMOS process. • Compared with other broad-band techniques, the presented LNA takes the advantages: less design complexity, low high-frequency noise, low power dissipation, and small size.

  9. References • [1] A. Bevilacqua and A. M. Niknejad, “An ultra-wide-band CMOS lownoise amplifier for 3.1 to 10.6-GHz wireless receiver,”IEEE J. Solid-State Circuits, vol. 39, no. 12, pp. 2259–2268, Dec. 2004. • [2] R. Liu, C. Lin, K. Deng, and H.Wang, “A 0.5–14-GHz 10.6-dB CMOScascode distributed amplifier,” in Dig. Symp. VLSI Circuits, Jun. 2003,vol. 17, pp. 139–140. • [3] C. F. Liao and S. I. Liu, “A broadband noise-canceling CMOS LNA for 3.1–10.6-GHz UWB receiver,” in Proc. IEEE 2005 Custom Integr.Circuits Conf., Sep. 2005, pp. 161–164.

  10. Thank You For Your Attention

More Related