Titration Experiment Preview by Jennifer Klein-Wackerla
70 likes | 338 Vues
Titration Experiment Preview by Jennifer Klein-Wackerla. Titration Experiment Preview. This is a preview of the titration experiment we will be doing in class. Look through the following slides to get familiar with the setup of the lab.
Titration Experiment Preview by Jennifer Klein-Wackerla
E N D
Presentation Transcript
Titration Experiment Preview • This is a preview of the titration experiment we will be doing in class. • Look through the following slides to get familiar with the setup of the lab. • If necessary, print off the slides for a guide while performing the experiment.
Titration Experiment Preview • A ring stand, a clamp, a burette, a 250mL flask, a funnel, and a white sheet of paper are required materials • The materials should be assembled as the picture shows.
Titration Experiment Preview • Using the funnel at the top, fill the burette with the HCl solution. • Be sure the stopcock of the burette is closed! • In the flask place the weighed TRIS, the distilled water, and 5 drops of the indicator.
Titration Experiment Preview • Begin the titration by opening the stopcock to make the HCl solution flow dropwise into the flask. • Be sure to swirl the flask constantly so the solutions mix thoroughly.
Titration Experiment Preview • Continue to add HCl solution to the flask until a color change begins (blue to green) • At this point, slow the flow even more. You actually want the solution to be more green than yellow (over titrated shown.)
Titration Experiment Preview • This titration went past the equivalence point. The color should have been more greenish-yellow. • If you get a solution as yellow as the one shown, you must redo the titration.