1 / 22

Solutions

Solutions. Types of Mixtures, Rates of Solubility, and Molarity / Molality. Types of Solutions. Solutions Soluble – capable of being dissolved Solution – homogeneous mixture of two or more substances in a single phase Components of Solutions Solvent – dissolving medium in a solution

ivie
Télécharger la présentation

Solutions

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Solutions Types of Mixtures, Rates of Solubility, and Molarity/Molality

  2. Types of Solutions • Solutions • Soluble – capable of being dissolved • Solution – homogeneous mixture of two or more substances in a single phase • Components of Solutions • Solvent – dissolving medium in a solution • Solute – substance dissolved in a solution

  3. Types of Mixtures • May exist in all states of matter (gas, liquid, solid) • Examples: • Oxygen and Nitrogen gas (gas/gas) • Carbon Dioxide in water (gas/liquid) • Water in air (Liquid/gas) • Alcohol in water (Liquid/Liquid) • Mercury in Silver (Liquid/Solid) • Sugar in water (solid/liquid) • Copper in Nickel (Solid/Solid)

  4. Types of Solutions • Suspensions – particles in a solvent are so large that they settle out unless the mixture is constantly stirred or agitated • Colloids – particles that are intermediate in size between those in solutions and suspensions form mixtures known as colloidal dispersions • Tyndall Effect • Particles are sometimes large enough to scatter light. • Light is scattered by colloidal particles dispersed in a transparent medium • Gelatin in water = colloid • Sugar and water = true solution

  5. Tyndall Effect

  6. Types of Solutions • Solutes: Electrolytes v. Nonelectrolytes • Electrolyte – substance that dissolves in water to give a solution that conducts electric current • Nonelectrolyte – substances that dissolves in water to give a solution that does not conducts electric current

  7. The Solution Process • Factors Affect the Rate of Dissolution • Increasing the Surface Area of Solute • Agitating a Solution • Heating a Solvent

  8. The Solution Process • Solubility • Solution equilibrium – the physical state in which the opposing processes of dissolution and crystallization of a solute occur at equal rates. • Saturated v Unsaturated • Saturated - solution that contains the maximum amount of a dissolved solute • Unsaturated – solution that contains less solute than a saturated solution under the existing conditions

  9. The Solution Process • Supersaturated • A solution that contains more dissolved solute than a saturated solution contains under the same conditions • Solubility Values • The solubility of a substance is the amount of that substance required to form a saturated solution with specific amount of solvent at a specified temperature

  10. The Solution Process • Solute – Solvent Interactions • Dissolving Ionic Compounds in Aqueous Solution • Hydration – solution process with water as the solvent is referred • When crystallized from aqueous solutions, some ionic substances form crystals that incorporate water molecules.

  11. The Solution Process • Nonpolar Solvents • Ionic compounds are generally not soluble in nonpolar solvents such as carbon tetrachloride. • Non polar solvent molecules do not attract the ions of the crystal strongly enough to overcome the forces holding them together.

  12. The Solution Process • Liquid Solutes and Solvents • Immiscible – liquid solutes and solvents that are not soluble in each other • Miscible – liquids that dissolve freely in one another in any proportion

  13. The Solution Process • Effects of Pressure on Solubility • Increases in pressure increase gas solubilities in liquids • Henry’s Law – the solubility of a gas in a liquid is directly proportional to the partial pressure of that gas on the surface of the liquid. • There are no gas bubbles in an unopened bottle of soda because the pressure of CO2 applied during the bottling process keeps the carbon dioxide gas dissolved in the liquid. • Effervescence – rapid escape of a gas from a liquid in which it is dissolved

  14. The Solution Process • Effects of Temperature on Solubility • Increasing the temperature usually decreases gas solubility • The effect of temperature on the solubility of solids in liquids is more difficult to predict. • Often increasing the temperature increases the solubility of solids • However, an equivalent temperature increase can result in a large increase in solubility in one case and only a slight increase in another.

  15. The Solution Process • Heats of Solution • The net amount of heat energy absorbed or released when a specific amount of solute dissolves

  16. Concentration of Solutions • Concentration – a measure of the amount of solute in a given amount of solvent or solution

  17. Concentration of Solutions • Molarity • The number of moles of solute in one liter of solution • Molarity (M) = • Example: You have 3.50 L of solution that containes 90.0 g of sodium chloride. What is the molarity of that solution? • Given: solute mass = 90.0n g NaCl solution volume = 3.50 L • 90.0 g NaCl x = 1.54 mol NaCl • = 0.440 M NaCl

  18. Concentration of Solutions • Now You Try • You have 0.8 L if 0.5 M HCl solution. How many moles of HCl does this solution contain? • To produce 40.0 g of silver chromate, you will need at least 23.4 g of potassium chromate in solution as a reactant. All you have on hand in the stock room is 5 L of a 6.0 M K2CrO4 solution. What volume of the solution is needed to give you the 23. 4 g K2CrO4 needed for the reaction?

  19. Concentration of Solutions • What is the molarity of a solution composed of 5. 85 g of potassium iodide, KI, dissolved in enough water to make 0.125 L of solution? • How many moles of H2SO4 are present in 0.500 L ov a 0.150 M H2SO4 solution? • What volume of 3.00 M NaCl is needed for a reaction that requires 146.3 g of NaCl?

  20. Concentration of Solutions • Molality • The concentration of a solution expressed in moles of solute per kilogram of solvent • Molality =

  21. Concentration of Solutions • Example: A solution was prepared by dissolving 17.1 g of sucrose ( C12H22O11) in 125 g of water. Find the molal concentration of this solution. • Given: solute mass = 17.1 g sucrose • Solvent mass = 125 g water • 17.1 g C12H22O11 x = 0.0500 mol C12H22O11 • = 0.400 m C12H22O11

  22. Concentration of Solutions • Now You Try! • A solution of iodine, I2, in carbon tetrachloride is used when iodine is needed for certain chemical tests. How much iodine must be added to prepare a 0.480 m solution of iodine in carbon tetrachloride if 100.0 g of CCl4 is used? • What is the molality of a solution composed of 255 g of acetone, (CH3)2CO, dissolved in 200 g of water? • What quantity in grams of methanol, CH3OH, is required to prepare a 0.244 m solution in 400 g of water?

More Related