1 / 7

SS and AFC Control Systems

SS and AFC Control Systems. Brian Martlew 21 st Sept 2011. 2 - Overview. Initially the plan was only to design and build control systems for integration of the Spectrometer Solenoid and AFC into the MICE hall.

ivrit
Télécharger la présentation

SS and AFC Control Systems

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. SS and AFC Control Systems Brian Martlew 21st Sept 2011

  2. 2 - Overview • Initially the plan was only to design and build control systems for integration of the Spectrometer Solenoid and AFC into the MICE hall. • During the formulation of a recovery plan for the SS the need for a control system that could be used during the cooldown, testing and field mapping was identified. • Similarly, a requirement for monitoring and control during the cooldown and testing of the AFC at Tesla and RAL exists. • DL has taken on responsibility for the design, build and commission of both systems (as well as the final hall systems).

  3. 3 - Design • Requirements for both systems are similar, therefore a common hardware design has been developed. • 19” rack • VME crate – MVME5500 PPC CPU • RS232 Serial comms • 16-bit analogue input/output • DL standard Canbus interlock modules • Cable terminals for connection of instrumentation, PSUs etc. • EPICS with control synoptics, archiving etc • This is essentially identical to other DL supplied systems already in use on MICE (ie. DS, beamline magnets, target).

  4. 4 - Spectrometer Solenoid - Details • Detailed document produced by Ian Mullacrane detailing interface and control requirements. • Included: • Control/monitoring of magnet power supplies • Monitoring of temperatures • Monitoring of levels • Control of heaters • Control/monitoring of cryo-compressors • Not included: • Vacuum monitoring – provided by FNL • Monitoring of voltage taps / quench detection – FNL • Process control requirements still being developed – but minimal needs anticipated for cooldown and initial testing

  5. 5 - AFC - Details • Requirements from Tom Bradshaw • For testing at Tesla: • Monitoring only • For acceptance tests in R9, RAL • Monitoring • Quench protection (likely to be minimal) • For full hall integration • Monitoring • Quench protection • Control of top plate temp & pressure • Remote monitoring and control • Automation

  6. 6 – Project Milestones • 30th Sept Procurement complete • 28th Oct Assembly of AFC rack complete • 15th Nov AFC rack testing at DL complete • 17th Nov AFC rack ready for shipping • 24th Nov AFC rack delivered to Tesla • 18th Nov Assembly of SS rack complete • 6th Dec SS rack testing at DL complete • 8th Dec SS rack ready for shipping • 22nd Dec SS rack delivered to Wang NMR

  7. 7– Future • Systems for hall integration of both SS and AFC will be of very similar design and will incorporate lessons learned during the early stage testing • Plan is to re-use one of the portable systems for testing of RFCCs (details yet to be agreed)

More Related