1 / 11

Pre-amp. Mechanical and Electrical Design

Pre-amp. Mechanical and Electrical Design. A. Bouabdellah. Electrical Diagram. No major design change on the P.A. from EPR: Calibrator Amplifier Power regulator Only one calibration command (SCM_Cal). SCM_Cal. B signal. PCB.

jabari
Télécharger la présentation

Pre-amp. Mechanical and Electrical Design

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Pre-amp. Mechanical and Electrical Design A. Bouabdellah

  2. Electrical Diagram • No major design change on the P.A. from EPR: • Calibrator • Amplifier • Power regulator • Only one calibration command (SCM_Cal) SCM_Cal B signal

  3. PCB • FM will be rerouted because of an error in the footprint of a component. • Amplifier cubes too close to the connector: Increase housing?

  4. PCB

  5. Preamplifier housing • Aluminum Alloy 2618A • Screws Inox A2 • Surface treatment: Alodine 1200 Yellow • Mass: 85 g • Overall dimensions: 94.9 x109 x 30.1 mm • EM – Slight damage, a new box is being manufactured.

  6. P.A. Mech Interface X Y

  7. P.A. Mech Interface 1mm clearance

  8. P.A. mass Total P.A. 195 g (PCB not yet coated)

  9. Antennae mass • Search coils masses: • Structure mass (calculated): 181 g • Connector, cables: ~80 g Total S.C. mass: ~586 g without MLI

  10. Power and mass summary

  11. Interface model • J02 connector: Interface signals to IDPU compatible with flight models. • Bx, By, Bz: External stimuli signals • 2 LEDs power and Cal ON Bx Power By J02 To IDPU Bz Cal

More Related