1 / 16

Islamic University-Gaza Faculty of Engineering Electrical & Computer Engineering Department

Islamic University-Gaza Faculty of Engineering Electrical & Computer Engineering Department. Global System for Mobile Communication GSM. Group Alaa Al-Zatma Hosam Al-Awaj Obada Abdullah Supervisor Dr. Basil Hamad. Contents. Introduction to GSM Services provided by GSM

jacob-carey
Télécharger la présentation

Islamic University-Gaza Faculty of Engineering Electrical & Computer Engineering Department

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Islamic University-Gaza Faculty of Engineering Electrical & Computer Engineering Department Global System for Mobile Communication GSM Group Alaa Al-Zatma Hosam Al-Awaj Obada Abdullah Supervisor Dr. Basil Hamad

  2. Contents • Introduction to GSM • Services provided by GSM • Architecture of GSM Network • Cells & its types • Calling with GSM • Security of GSM • Conclusion

  3. Introduction to GSM • GSM is a digital cellular communications system • In early of 1982, the standard GSM was formed. • More than 800 million end users in 193 countries over 550 networks • Palestine • JAWWAL use GSM

  4. More .. • Provides a best cellular service in best voice and speed of connection • More security • Compatibility • Use TDMA or CDMA to increase capacity

  5. Services provided by GSM • Call waiting & Call hold • If you are using the phone, Call Waiting will alert you to a second caller. You need never miss an incoming call. • Use Call Hold to put the person you are talking to on hold so you can call another party, and then switch between the two calls. • Call forwarding To divert incoming calls to another number. • Calling line identity (CLI) CLI displays the number (name if stored on your phone) of the incoming call.

  6. Cont.. • SMS (short messaging service) allow you to send & receive text messages on your phone • Data Services • receive and send data • GSM currently has a data transfer rate of 9.6 kbps. • New developments which push up data transfer rates for GSM users like: • HSCSD (high speed circuit switched data) • GPRS (general packet radio service) are now available.

  7. Authentication Center: • used for security purposes • provides the parameters • needed for authentication and • encryption functions Architecture of GSM Network • Visitor Location Register: • contains temporary • information from • a subscriber’s HLR • Mobile services Switching Center • Backboneof GSM Network • Advanced digital divider • manager of BSCs • Manage, prepare, control, • and passing the call through • the GSM network • Mobile Station: • Consist of: • mobile equipment • a smart card called the • Subscriber Identity • Module (SIM) • Base Transceiver Station: • Control the frequencies • Its task is transmitting • & receiving for mobile • Home Location Register: • It has a very important Database • Store information about • subscribers belonging the • coverage area of MSC • stores the current location of • these subscribers and the • services to which they have access • Gateway Mobile services Switching Center : • It is an interface between the mobile cellular network and the PSTN • Manage the outer • communications (Roaming) • Base Station Controller: • controls a group of BTS • manages BTS radio • resources • It is principally in charge of handovers • Equipment Identity Register: • used for security purposes • containing information about the • mobile equipments

  8. Cells • The cell: • It’s the main unit of cellular system • Identified by its Cell Global Identity number (CGI) • Corresponds to the radio coverage of BTS • Types of cells are used: • Macro cells: large cells for remote and sparsely populated areas • Micro cells: • used for densely populated areas • splitting the existing areas into smaller cells

  9. Location Area (LA) • Defined as group of cells in the network • The subscriber's location is known in this area and store in VLR • If the subscriber transported from Location to another VLR must have a report of subscriber's new location

  10. Calling with GSM .. • Your mobile call the cellular phone’s network and send it to nearest tower • The tower transmit the waves to the switchboard • If you call Telephone the switchboard transmit your call to PSTN • If you call another mobile, then the switchboard transmit the wave to the nearest tower of another mobile • If the caller are increase, the company must be increase the towers to make fine calling • So you can see small towers in high buildings and centers, etc..

  11. BSC BSC BTS BTS BSC BSC BTS BTS HLR EIR GMSC Handover • Handover is the switching of an on going call to a different channel or cell. • Type of handover there are four different type of handover in which involve transferring a call between : SIM VLR PSTN ISDN,PSPDN CSPDN M S C MSC MSC ME Mobile Station Abis Base Station Subsystem Network Subsystem

  12. Authentication & Security Why authentication? • Authentication involves two functional entities, the SIM card, (AuC). • Each subscriber has a secret key which copied in the SIM card, (AuC). • The AuC generates a random number and it sends to the mobile. • Both the mobile and the AuC apply these number to the ciphering algorithm called A3, to calculate a third number • The mobile send the calculated number to the AuC • If the two calculated number is the same then the subscriber is authenticated

  13. cont. • Another level of security is performed on the mobile equipment itself • each GSM equipment is identified by a unique (IMEI) number. • A list of IMEIs in the network is stored in the (EIR) and they will divided in to three list • White-listed the equipment is allowed to connect to the network. • Grey-listed the equipment is under observation from the network for possible problems. • Black-listed the equipment has either been reported stolen, or is not type approved; The terminal is not allowed to connect to the network.

  14. Conclusion • We see the architecture of GSM network and the main function of the main part of this network. • each dialed call must pass through BTS;BSC and MSC. • GSM system characterized by high mobility so any one can travel during the time of the call. • Another important characteristic of GSM is the high security; so no one can listen to your call this is because of the random number. • There is no affect genetic material

  15. Reference • http://www.myjawwal.com • http://www.luc.ac.be/~hbaerten/gsm/ • http://www.gsmworld.com/ • http://www.gsmag.com/ • http://www.mobileworld.org/ • http://kbs.cs.tu-berlin.de/~jutta/gsm/gsm-list.html • http://www.howstuffworkcom

  16. THANK YOU

More Related