340 likes | 1.42k Vues
Meditech Upgrade Online Education. Go-Live is November 17th!. Go-Live Plan. 1. Meditech 5.64 Upgrade is November 17 th 2. There will be support from Tuesday thru Saturday evening; flyers will be posted on the unit prior to Go-Live.
E N D
Meditech Upgrade Online Education Go-Live is November 17th!
Go-Live Plan 1. Meditech 5.64 Upgrade is November 17th 2. There will be support from Tuesday thru Saturday evening; flyers will be posted on the unit prior to Go-Live Starting November 17th the Meditech System will automatically prompt you into the new 5.64 system.
Reviewing the Application Menu Once you are logged into the system you are at your main desktop. The main desktop is no longer gray, and no longer has the colorful, picture based icons that we have grown accustomed to. Instead the application menu is expandable and collapsible. When there is a black arrow next to the application name on the menu that is your indicator that there is more information behind that menu item, and it can be expanded. It can then be collapsed when you are finished.
The Admissions Menu From the Applications menu, you can click on the first expandable menu, the admissions menu. This will open up the Registration Management Desktop for you. As you can see below.
The Admissions Menu continued….. Clicking the Registration Management Desktop gives you the Patient Transfer/Discharge functionality 1. In Transfer- is for transferring Inpatients and Observation Patients only2. Out Transfer- is for transferring SDC orOutpatients only (Preop & Pacu areas)3. Discharge- is for Discharging Patients (you select the type of patient you are discharging from the hospital from the drop down menu)
The Order Entry Menu Click on Order Entry, since this an expandable menu, a second list will appear. This is where the Nurse’s Main Desktop is now located. Here you can access all of your ED Admission Reports, Reported Home Medication Reports, Census Reports, Downtime Reports, etc. *There are two new tabs located on the right menuRecent- Shows a listing of screens you have accessed recently in your current sessionFrequent- Routines that you use most often Click on PCS Worklist to get to your status board.
Status Board *Note- If you document against an assessment before it is due, the pink will go away…Example- your AM assessment is due at 0800 but you document against it at 0730, the assessment will not pink up until the next time that it is scheduled!! Nothing has change with the method that we add and remove our patients. However, our status board does look different in Meditech 5.64. Notice the new Order column on the far right.
Order Entry Changes Orders Entry is still basically the same in the new version of Meditech. Remember just like in the current Meditech, in the upgrade RedPrint identifies a duplicate order on the set, or an active order already entered on the patient. However, you will notice some cosmetic changes to Order Entry with the Meditech upgrade. A Red Edit button identifies orders that need to have further detail entered before filing While a BlueEdit button does not require you to enter anything additional before filing
Viewing and Acknowledging Stat Orders Let’s ACK orders from the Status Board against the orders in the chart (instead of Order History) 1. All STAT orders are listed first and are Pink2. To ACK the order click on the word Stat 3.The Order Detail screen will open4. Review the computer entered order with what the physician has written and if both match, initial the order in the chart place a check mark next to ACK by the Order Once you have selected the Stat Order and reviewed click Acknowledge at the bottom of the Order Detail screen
Viewing and Acknowledging Routine Orders Let’s ACK more orders from the Status Board against the orders in the chart (instead of Order History) 1. Since there are no Stat orders on our patient now, there is no pink STAT in the Order column instead there is a gray ACK to alert you that there are new orders to be acknowledged2. To ACK the order click on the word ACK 3.The Order Detail screen will open4. Review the computer entered order with what the physician has written and if both match, initial the order in the chart place a check mark next to ACK by the Order 5. Since we have multiple orders to review click Select & Next on the bottom menu 6. Once all orders are reviewed click Acknowledge at the bottom of the Order Detail screen
Acknowledging Orders from the Status Board Click the Acknowledge Orders button at the bottom (footer) of your status board screen This allows you to acknowledge orders on multiple patients. If you use this method all of orders will display and be listed next to the patient’s name
Viewing Order History Once all of the orders have been acknowledged then theorder column will be blank. You can click in the empty field (at the top of the green Order column) and the Order History will automatically launch
Caring for a New Patient New- will appear the first time that you log onto the patient and shows previous orders that have been ACK by the previous RN caring for the patient (will show the orders placed in Order Entry in the past 14hrs) 2. Click on New *Note- ACK orders screen will open and allow for viewing the order history/detail. Once you have reviewed the previously ACK orders click Close to exit. The New flag will go away *Note- You will only see the word “New” if there are no STAT orders entered on the patient *Note -If your patient has a STAT order you will see the word STAT in place of the word new
Viewing Lab Results from the Status Board On the Status Board under the Results section, you will no longer see the purple letters to indicate results. Instead you will see: 1. Pink boxed results are Critical 2. Yellow boxed results are Abnormal 3. Gray boxed results are Regular Once you click on the Result notification the screen containing the result will open. Once you exit the screen the notification and color will disappear. The appearance and disappearance of the status board notification is completely individual and is linked to your Meditech login ID.
Documenting Critical Lab Values All Critical Lab Values require proper documentation within 60 mins of the nurse being notified by the lab of the critical. The nurse should immediately informed the physician that ordered the lab of the critical result and document that the notification occurred within the 60 min timeframe by using the critical lab value document which is found on all SOCs. Nurses must document that they were notified, if the value was expected ( if it was a comment about why), and the name of the person they notified along with the date and time. The exact critical value and any nurse actions taken as a result of speaking with the physician is also required. Followed prescribed orders is only answered if a order to address that critical value is already on the chart otherwise it is left blank. Unit Secretaries and NSTs cannot complete this form, nor can they take calls for critical lab values from the lab.
Looking at Medications from the Status Board We can still click under Medications on the Status Board to see the next 8 hours of medication orders displayed. However, now the IV orders display the entire order, and remember you are able to access the eMAR from the medications list
eMAR View 1. Click on the eMAR tab located in the right main navigation menu2. Notice that the font is larger and that the Dose Instructions/label comments arecollapsible3. Next drug name, dose, and dose due is bolded4. Click on the +/- signs to open and close the label comments and dose instructions *Note- You can also click on the +/- Admin Instructions Key to open and close ALL dose Instructions and label comments
Check Interactions Feature in in the eMAR Click on Additional Functions Select Check Interactions Click on the Drop Down Box
Check Interactions Feature in in the eMAR 4. Type in a Medication in the Search field 5. Click Enter 6. Click on a Medication in the Against Drugs list using the drop down box 7. Once the Med ID is highlighted click OK in the bottom right
Check Interactions Feature in in the eMAR 8. The Interaction screen will display 9. Click Close at the bottom right
IV Spreadsheet 1. In the right navigation menu click on IV Spreadsheet2. Select OK to default the column time to Now *Note- This is the exact same spreadsheet as the IV spreadsheet Intervention. You will now document against the IV Spreadsheet here, it will no longer be part of your SOC and you will no longer be able to add it to your intervention list The font and appearance is slightly different.
IV Spreadsheet Let’s document IVF intake for a Med Surg patient A column is inserted when the bag is hung and a “0” is placed as the inake amount , this “0” acts as a placeholder because our hospital policy is to only document fluids that have infused into the patient Now at the present time you can document the intake, rate and site. Our patient was receiving a bolus of 500cc of his IVF over the last hour. M/S documents lump totals for IVF intake every 8 hours *For critical care areas they would enter the intake and the rate for every hour versus a lump total every 8 hours *The zero indicates what time the IVF/med was hung and the total volume infused should be entered once the bag finishes. The time from the “zero” entry to the total volume is how long the IVF/IV med took to infuse 4. Click Save in the bottom right hand corner
Intake and Output in the EMR In the right main navigation menu click on the EMR Click on I & O *Note- Remember that the Intake and Output add up in the EMR. You can select different “hour” views for specific amounts and totals
Help Key There is a help key at the bottom right of the screen that is much more helpful. When you have a questions regarding a screen that you are viewing or documenting against then you can access the Help key 1. While viewing the I &O screen in the EMR click on the Question Mark located in the bottom right menu2. The Help Screen will open and contain information regarding the screen that you are viewing or documenting against 3. Click the black X at the top of the screen to exit the Help screen
Notes 1. Click on Notes located on the right main navigation menu2. At the bottom click on Enter3. The date and time will default to the present. To change the time click on the current time (Note the new Time box). 4. To write your own note, just move your cursor to the large white space and begin typing. 5. We now have spell check, just click on the blue checkmark in the tool bar.
Canned Text Notes 1. Click on Enter at the bottom of the screen2. Click in the white text area3. Add a canned text note by clicking F5 for the “get” function4. Next click F9 for the “look up” function5. Choose the Admit To note by clicking on the title
Canned Text Notes *Note- a note template drops in, and you are still able to fill in the blanks by free texting and also by choosing from a drop down 1. You are able to free text information into the blanks, or add information as necessary 2. Click F12 to advance to the next section for completion 3. Scroll through the list and highlight the Stretcher option 4. To Select that as the option click on it when it is Highlighted Green5. Once you have completed free texting in the fields click F12 to enter the note 6. Click Save in the bottom right corner 7. Click Close in the bottom right corner Remember you can spell check by using the blue checkmark.
Care Plans Click on Process Plans located on the right main navigation menu Click on Enter at the bottom of the page Click on Care Plan
Care Plans Click on Process Plans located on the right main navigation menu Click on Enter at the bottom of the page Click on Care Plan
Care Plans 4. Type in Capital Letters “MS”5. Click Enter to add the Med Surg Care Plan6. Click Enter Twice to accept the default date and time of Today and Now7. Click Save at the bottom of the screen8. Click Close
Care Plans Next, Prioritize your problems in your care plan, by clicking Edit, then Prioritize Problems. Now, you can rank your problems in the Priority new column. 1 is the most important problem in your opinion for this patient. You may have multiple 1’s or 3’s, etc. Every problem must be ranked. Nothing has changed with the way that we document on our care plan. We still document against the care plan under Outcomes just as we normally would.
Reconcile Meds Most of Reconcile Meds is the same in the Meditech upgrade as it is now. The cosmetic difference that you will notice is that once you have added a medication to your patient and saved, then click on Last Dose Taken the Last Taken screen is different. You now have a calendar, a time calculator. However, the fill in the blank box for the dose remains the same. Today’s date and current time will automatically default on the screen. If you patient does not know the date, time or dose, click clear on the bottom left then type unknown in the dose blank and save. Otherwise, just change the needed information so that the screen matches what you patient tells you, and save.
Toggling for Graphs This functionality allows you to compare and trend different Numerical data… Here is an example… 1. Click on the EMR2. Click on the Vital Sign’s tab3. Right Click in the yellow Blood pressure area4. Select the Toggle for Graph option5. Next click on the I&O tab6. Right Click in the yellow IV Total area7. Select the Toggle for Graph option8. Next at the bottom of the screen select the Graph option *Click Clear in the upper right hand corner to remove the toggled information
Questions?????????? Contact Cindy Ellis Cellis@gbmc.org or 443-849- 6014 Sharon Rowe Srowe@gbmc.org or 443-849-2515 Lisa-Marie Williams Lwilliams@gbmc.org or 443-849-2137