1 / 9

RPF Binder Distributor Task Team Feedback

jana
Télécharger la présentation

RPF Binder Distributor Task Team Feedback

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

    1. RPF Binder Distributor Task Team Feedback 21 May 2003 Pietermaritzburg

    3. Recommendations of Task Team Agreement was reached by the Task Team on the following issues: 12 month validation period for calibration certificates Test method protocol for ‘bakkie’ test ‘Bakkie’ test tolerances ‘Bakkie’ test register Spray rate tolerances Where applicable the above proposals to be included in the revision of TRH 3

    4. ‘Bakkie’ test tolerances

    5. Recommendations of Task Team Agreement was reached by the Task Team on the following issues: 12 month validation period for calibration certificates Test method protocol for ‘bakkie’ test ‘Bakkie’ test tolerances ‘Bakkie’ test register Spray rate tolerances Where applicable the above proposals to be included in the revision of TRH 3

    6. Spray rate tolerances Max variation from specified rate to be largest value of: +- 0.06 l/m2 for any binders (net cold) +- 5% at spray temperature for Conventional binders (pen, cut, emul) PMB’s Bitumen rubber +- 5% at net cold for bitumen emulsions Payment reduction factors and remedial measures Min lot size of 4,000 litres

    7. Best practice related to binder distributors & the environment Update Sabita Manual 8 to incorporate best practice wrt: Latest HSE legislation Transporting, storage and application of binders on-site Latest Austroads publication ‘Bitumen Sealing Safety Guide’ Draft document to be submitted to Sabita’s COSHEC focus group for approval

    8. Outstanding issues Complete investigation into ‘pad’ test to measure transverse & longitudinal distribution Revision of TMH 2 ‘fixed pit calibration of binder distributors’ Update COTO ‘General specifications for roads & bridge works’

    9. Summary Concern over updating existing COLTO & TRH 2 documents Above recommendations to be circulated for comments tdistin@colas.co.za Although mandated tasks are complete the task team will continue to meet to address outstanding issues

More Related