1 / 18

Update on Plasma Reconstructions in Vacuum

Update on Plasma Reconstructions in Vacuum. NCSX SWG Meeting Reiersen, Georgiyevskiy, et al PPPL June 17, 1999. Topics. Review last week’s results d 2 B z /dr 2 scan B t scan Symmetrization at 100% and 110% toroidal field Harmonic analysis Conclusions. Review of last week’s results.

jasper-roy
Télécharger la présentation

Update on Plasma Reconstructions in Vacuum

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Update on Plasma Reconstructions in Vacuum NCSX SWG Meeting Reiersen, Georgiyevskiy, et al PPPL June 17, 1999

  2. Topics • Review last week’s results • d2Bz/dr2 scan • Bt scan • Symmetrization at 100% and 110% toroidal field • Harmonic analysis • Conclusions

  3. Review of last week’s results • Fixed boundary VMEC had iotas from 0.033-0.288 • Fixed boundary PIES results showed few good surfaces outside 3/19 island chain • Free boundary PIES results were similar • Iotas range from 0.05-0.158 • Large stochastic region apparent outside of 3/19 islands • Approximately half the plasma volume is lost • Outer region packed with n=3 resonances • Nine primary resonances in this region (m= 18 -10) • Spacing between resonances ranges from 7-12 mm • Initial efforts to beat down resonances unsuccessful • J in large saddles up by almost 60%

  4. Fixed/free boundary PIES results Fixed Boundary Free Boundary

  5. Bz varied from 0 - 1x reference • Plasma shifts outward with more positive Bz • Minor radius at midplane increases, less indentation • Little impact on iota or number of good surfaces prior to scraping off plasma Reference 0.5 Reference Zero Bz

  6. dBz/dr varied from 0 - 2x reference • Increasing dBz/dr did not move axis or change height • Lowered elongation, increasing volume with good surfaces • Doubled central iota from .042 to .100 for 2x ref, lesser impact on edge iota Zero dBz/dr Reference 2x Reference

  7. d2Bz/dr2 varied from -1 to +4x reference

  8. More concave -> more crescent-shaped plasma • More convex - > more square-shaped More concave (-1x reference) Reference d2Bz/dr2 More convex (+4x reference)

  9. Bt varied from 80-110% • All other coil currents fixed • Lowering Bt raises iota, decreases plasma volume by moving edge limiting resonances into the plasma region • Raising Bt lowers iota, increasing the plasma volume by moving edge limiting resonances beyond the first wall

  10. 80% TF 100% TF 110% TF Iota(a)=0.208 Iota(a)=0.158 Iota(a)=0.157

  11. Modest improvements can be achieved by symmetrization with PF • Bz used to control radial position • dBz/dr used to control elongation • d2Bz/dr2 used to control “squareness”

  12. Edge on symmetrized reference vacuum configuration defined by onset of overlapping islands • Highlights need to suppress islands to grow plasma

  13. Edge on symmetrized 110% Bt configuration defined by first wall • Highlights need to expand first wall boundary to grow plasma • Particularly in square x-section (top, bottom, and outboard) and bean-shaped cross section (inboard)

  14. Harmonic analyses • Poor correlation found between island size and Bmn - lower Bmn’s had larger islands than higher Bmn’s closer to the plasma edge • Discrepancy may be due to not decomposing Bn in straight line coordinates (Reiman, Hirshman) • Valanju has developed a code to do this - awaiting input on fixed boundary equilibrium from Ku for reference vacuum case • Correlation study will be repeated

  15. TF ripple appears to have no impact on magnetic surfaces • TF linear dimensions roughly doubled, lowering TF ripple by orders of magnitude • No discernible impact apparent in Poincare plots • Bmn’s impacted in fourth significant digit

  16. Conclusions • The PF system provides useful knobs for controlling radial position, elongation, and triangularity/squareness • The TF system provides a useful knob for raising/lowering iota, moving problematic resonances into or out of the plasma in the process • TF ripple does not have a significant impact on magnetic surfaces • To increase plasma volume and iota, need to: • Expand first wall boundary in tight spots • Have capability to surgically suppress problematic resonances • Reduce current density in reference configuration • Need headroom for coil currents to increase at other operating points • Important for flexibility!

  17. Next steps • Explore expanded first wall boundary • Explore plasma shape and iota profile control with saddle coils • Validate harmonic analysis methodology as basis for suppressing islands • Explore suppression of islands with existing coil systems • Develop functional requirements for trim coils • Continue to explore options for reduced J in reference configuration • Study magnetic surfaces in the reference high beta, full current configuration

More Related