1 / 12

Anatomic and Biomechanical principles related to splinting

Anatomic and Biomechanical principles related to splinting. Anatomic location. Arm: area from shoulder to elbow (humerus) Antecubital fossa: depression at the bend of the elbow Forearm: area from elbow to wrist Carpal: wrist or carpal bones Fingers: thumb, index, middle, ring, little

jbowman
Télécharger la présentation

Anatomic and Biomechanical principles related to splinting

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Anatomic and Biomechanical principles related to splinting

  2. Anatomic location Arm: area from shoulder to elbow (humerus) Antecubital fossa: depression at the bend of the elbow Forearm: area from elbow to wrist Carpal: wrist or carpal bones Fingers: thumb, index, middle, ring, little Numbering fingers: I, II, III, IV, V (thumb) Palmar = volar: ant aspect of hand and forarm Radial : thumb side / Ulnar: little finger side

  3. Muscles and function nerve supply Study table 4-4 on page 59

  4. Arches of the hand 1. longitudinal arch 2. Distal transverse arch 3. Proximal transverse arch Functional significance Never splint the hand flat .. Creates deformity Specially with tendon and nerve injury

  5. Creases of the hand Three main palmar creases: distal, proximal and thenar creases The distal palmar crease extends from the fifth MCP joint to a point midway between the second and third MCP joints. This is important for allowing motion of the MCP’s for a wrist immobilization splint

  6. Creases of the hand Important for landmarks when making splint pattern and molding Figure 4-11 When splinting to immobilize a join, the crease should be included in the splint When mobilizing a joint? What happens with: Edema Paralysis disuse

  7. Biomechanical principles of splinting • Correct Biomechanics of Splint Design • Splints are simply machines and levers that work together. • Optimal client outcomes rely on biomechanics • Weak muscles are supported, and the pull of stronger muscles is counteracted. • Reduces risk of skin irritation due to pressure • Ultimately may lead to patient comfort, compliance, and function

  8. Biomechanical principles of splinting • three point pressure • Mechanical advantage (F1*D1 = F2*D2) • Torque • Pressure and stress • 1. degree • 2. duration • 3. repetition • 4. direction

  9. Degree and Duration of Stress • The skin is the least tolerating tissue to stress • Skin becomes ischemic as load increases • Even low stress can cause capillary damage and lead to ischemia • Splints may do that, this is why it is advised to distribute pressure over a larger area of skin

  10. Repetitive stress • It could lead to inflammation and skin breakdown • You have to remember that some diseases (lymph and vascular involvement) leads to an altered sense of tolerance • Small and sharp edges lead to stress

  11. Direction of Stress • You have to remember that there are three directions of stress: • Compression • Tension • Shear Pressure = Total Force/ Area of force application

  12. Questions?

More Related