1 / 28

Dr. R. Nagarajan Professor Dept of Chemical Engineering IIT Madras

Advanced Transport Phenomena Module 4 - Lecture 15. Momentum Transport: Steady Laminar Flow. Dr. R. Nagarajan Professor Dept of Chemical Engineering IIT Madras. STEADY LAMINAR FLOW OF INCOMPRESSIBLE NEWTONIAN FLUID. PDEs governing steady velocity & pressure fields:

jcaron
Télécharger la présentation

Dr. R. Nagarajan Professor Dept of Chemical Engineering IIT Madras

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Advanced Transport Phenomena Module 4 - Lecture 15 Momentum Transport: Steady Laminar Flow Dr. R. Nagarajan Professor Dept of Chemical Engineering IIT Madras

  2. STEADY LAMINAR FLOW OF INCOMPRESSIBLE NEWTONIAN FLUID PDEs governing steady velocity & pressure fields: (Navier-Stokes) and (Mass Conservation) “No-slip” condition at stationary solid boundaries: at fixed solid boundaries

  3. STEADY LAMINAR FLOW OF INCOMPRESSIBLE NEWTONIAN FLUID • Special cases: • Fully-developed steady axial flow in a straight duct of constant, circular cross-section (Poiseuille) • 2D steady flow at high Re-number past a thin flat plate aligned with stream (Prandtl, Blasius)

  4. FLOW IN A STRAIGHT DUCT OF CIRCULAR CROSS-SECTION Cylindrical polar-coordinate system for the analysis of viscous flow in a straight circular duct of constant cross section

  5. FLOW IN A STRAIGHT DUCT OF CIRCULAR CROSS-SECTION • Wall coordinate: r = constant = aw (duct radius) • Fully developed => sufficiently far downstream of duct inlet that fluid velocity field is no longer a function of axial coordinate z • From symmetry, absence of swirl:

  6. FLOW IN A STRAIGHT DUCT OF CIRCULAR CROSS-SECTION • Conservation of mass ( = constant): vz independent of z implies: • PDEs required to find vz( r), p(r,z) • Provided by radial & axial components of linear-momentum conservation (N-S) equations:

  7. FLOW IN A STRAIGHT DUCT OF CIRCULAR CROSS-SECTION • Pressure is a function of z alone, and if • p = p(z) and vz= vz( r), then: • i.e., a function of z alone (LHS) equals a function of r alone (RHS) • Possible only if LHS & RHS equal the same constant, say C1

  8. FLOW IN A STRAIGHT DUCT OF CIRCULAR CROSS-SECTION Hence: New pressure variable Pdefined such that: and , hence P varies linearly with z as:

  9. FLOW IN A STRAIGHT DUCT OF CIRCULAR CROSS-SECTION • Integrating the 2nd order ODE for vz twice: • Since vz is finite when r = 0, C3 = 0 • Since vz = 0 when • Hence, shape of velocity profile is parabolic:

  10. FLOW IN A STRAIGHT DUCT OF CIRCULAR CROSS-SECTION Since is a negative constant- i.e., non-hydrostatic pressure drops linearly along duct: and

  11. FLOW IN A STRAIGHT DUCT OF CIRCULAR CROSS-SECTION • Total Flow Rate: • Sum of all contributions through annular rings each of area Substituting for vz(r) & integrating yields:

  12. FLOW IN A STRAIGHT DUCT OF CIRCULAR CROSS-SECTION (Hagen – Poiseuille Law– relates axial pressure drop to mass flow rate) • Basis for “capillary-tube flowmeter” for fluids of known Newtonian viscosity • Conversely, to experimentally determine fluid viscosity

  13. FLOW IN A STRAIGHT DUCT OF CIRCULAR CROSS-SECTION • Total Flow Rate: • Average velocity, U, is defined by: Then: i.e., maximum (centerline) velocity is twice the average value, hence:

  14. FLOW IN A STRAIGHT DUCT OF CIRCULAR CROSS-SECTION Wall friction coefficient (non-dimensional): tw wall shear stress Cf  dimensionless coef (also called f  Fanning friction factor) Direct method of calculation: and

  15. FLOW IN A STRAIGHT DUCT OF CIRCULAR CROSS-SECTION Wall friction coefficient (non-dimensional): Hence: equivalent to: Holds for all Newtonian fluids Flows stable only up to Re ≈ 2100

  16. FLOW IN A STRAIGHT DUCT OF CIRCULAR CROSS-SECTION Wall friction coefficient (non-dimensional): Experimental and theoretical friction coefficients for incompressible Newtonian fluid flow in straight smooth-walled circular duct of constant cross section

  17. FLOW IN A STRAIGHT DUCT OF CIRCULAR CROSS-SECTION • Wall friction coefficient (non-dimensional): • Same result can be obtained from overall linear-momentum balance on macroscopic control volume A • z: • Axial force balance (for fully-developed flow where axial velocity is constant with z): • Solving fortwand introducing definition of P:

  18. FLOW IN A STRAIGHT DUCT OF CIRCULAR CROSS-SECTION Wall friction coefficient (non-dimensional): Configuration and notation: steady flow of an incompressible Newtonian fluid In a straight circular duct of constant cross section

  19. FLOW IN A STRAIGHT DUCT OF CIRCULAR CROSS-SECTION • Wall friction coefficient (non-dimensional): • Above Re = 2100, experimentally-measured friction coefficients much higher than laminar-flow predictions • Order of magnitude for Re > 20000 • Due to transition to turbulence within duct • Causes Newtonian fluid to behave as if non-Newtonian • Augments transport of axial momentum to duct wall

  20. FLOW IN A STRAIGHT DUCT OF CIRCULAR CROSS-SECTION • In fully-developed turbulent regime (Blasius): • Cf varies as Re-1/4 for duct with smooth walls • Cf sensitive to roughness of inner wall, nearly independent of Re

  21. FLOW IN A STRAIGHT DUCT OF CIRCULAR CROSS-SECTION • Wall friction coefficient (non-dimensional): • Effective eddy momentum diffusivity • Can be estimated from time-averaged velocity profile & Cf measurements • Hence, heat & mass transfer coefficients may be estimated (by analogy) • For fully-turbulent flow, perimeter-average skin friction & pressure drop can be estimated even for non-circular ducts by defining an “effective diameter”:

  22. FLOW IN A STRAIGHT DUCT OF CIRCULAR CROSS-SECTION where P  wetted perimeter • Not a valid approximation for laminar duct flow

  23. STEADY TURBULENT FLOWS: JETS • Circular jet discharging into a quiescent fluid • Sufficiently far from jet orifice, a fully-turbulent round jet has all properties of a laminar round jet, but , intrinsic kinematic viscosity of fluid •  jet axial-momentum flow rate • Constant across any plane perpendicular to jet axis

  24. STEADY TURBULENT FLOWS: DISCHARGING JETS • Laminar round jet of incompressible Newtonian fluid: Far-Field • Schlichting BL approximation • PDE’s governing mass & axial momentum conservation in r, q, z coordinates admit exact solutions by method of “combination of variables”, i.e., dependent variables are uniquely determined by the single independent variable:

  25. STEADY TURBULENT FLOWS: DISCHARGING JETS Streamline pattern and axial velocity profiles in the far-field of a laminar (Newtonian) or fully turbulent unconfined rounded jet (adapted from Schlichting (1968))

  26. STEADY TURBULENT FLOWS: DISCHARGING JETS Total mass-flow rate past any station z far from jet mouth yielding i.e., mass flow in the jet increases with downstream distance • By entraining ambient fluid while being decelerated (by radial diffusion of initial axial momentum)

  27. TURBULENT JET MIXING • Near-field behavior: • z/dj ≤ 10 • Detailed nozzle shape important • “potential core”: within, jet profiles unaltered by peripheral & downstream momentum diffusion processes • Swirling jets: • Tangential swirl affects momentum diffusion & entrainment rates • Predicting flow structure huge challenge for any turbulence model

  28. TURBULENT JET MIXING • Additional parameters: • Initially non-uniform density, viscous dissipation, chemical heat release, presence of a dispersed phase, etc. • Add complexity; far-field behavior can be simplified

More Related