1 / 16

After 8.1

After 8.1. What PDU is used at layer 3?. Bits Packet Segment Frame Something else. 1 of 3. What PDU is used at layer 1?. Bits Packet Segment Frame Something else. 2 of 3. Which function is not part of layer 1?. Physical and electrical properties of the media

jdriscoll
Télécharger la présentation

After 8.1

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. After 8.1

  2. What PDU is used at layer 3? • Bits • Packet • Segment • Frame • Something else 1 of 3

  3. What PDU is used at layer 1? • Bits • Packet • Segment • Frame • Something else 2 of 3

  4. Which function is not part of layer 1? • Physical and electrical properties of the media • Mechanical properties of the connectors • Routing • Representation of bits on the media • Encoding of control signals 3 of 3

  5. After 8.2

  6. An Ethernet switch is labeled “100 Mbps”. What is that value? • Bandwidth • Throughput • Goodput • Frequency • Bit time

  7. This Windows box shows a speed of 27.7 MB/second. What is that value? • Bandwidth • Throughput • Goodput • Frequency • Bit time

  8. What technique uses 10 bits to encode a single byte? • AM • 4B/5B • Manchester • NRZ • FM

  9. Which technique signals a 1 with a low-to-high voltage transition and a 0 with a high-to-low voltage transition? • 4B/5B • Optical • Manchester • NRZ • AM

  10. Which technique is so slow that it can't even transmit 10 Mbps? • AM • Optical • Manchester • NRZ • 4B/5B

  11. After 8.3

  12. Which standard allows segment lengths up to 80 km? • 10BASE-T • 100BASE-TX • 100BASE-FX • 1000BASE-T • 10GBASE-ZR

  13. Which standard is the slowest? • 10BASE-T • 100BASE-TX • 100BASE-FX • 1000BASE-T • 10GBASE-ZR

  14. Which standard is used by normal voice-only cell phones? • 802.15 • 802.11 • 802.16 • GSM • 802.3

  15. Which wireless technology is the slowest? • 802.11a • 802.11b • 802.11g • 802.11n • 802.15

  16. Error in the Curriculum! • 8.3.6 says "Because light can only travel in one direction over optical fiber, two fibers are required to support full duplex operation" • WRONG • Light can travel both directions simultaneously through glass--we all know that. Two fibers are used merely as a convenience, to make the receivers and transmitters cheaper.

More Related