1 / 27

Surface Texturing Rejuvenating Agent Longitudinal Joint Stabilizer

Surface Texturing Rejuvenating Agent Longitudinal Joint Stabilizer. District 11 Project US 25E Knox County. Objective.

jerrica
Télécharger la présentation

Surface Texturing Rejuvenating Agent Longitudinal Joint Stabilizer

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Surface TexturingRejuvenating AgentLongitudinal Joint Stabilizer District 11 Project US 25E Knox County

  2. Objective • Evaluate the usefulness of Skidabrator, Rejuvenator, and Joint Bond on differing pavement surfaces, varying ages, and mix types to see if they are warranted for use as a Preventative Maintenance Measure on KYTC Roadways.

  3. Selection of Test Sections • Section 1: • 15 yr old CL4 SMA 0.50A PG76-22 • AC Content 7.3 Percent • Granite • Section 2: • 2014 (3 yr old) - CL4 SMA 0.38A PG 76-22 • AC Content 6.6 Percent no Rap • Dolomite • Section 3: • 6 Month old CL4 SMA 0.38A PG 76-22 • AC Content 6.2 percent with 6 percent Rap • Dolomite

  4. Test Sections for Each Surface • 16 Test Sections • The sections consisted of Rejuvenator, Skidabrator, Joint Bond, and combinations of each. • We also use different application rates for each section • Section have been signed for future reference

  5. Test Locations • MP 24.487 to MP 24.319 – Surface texturing only (Skidabrader) • MP 24.319 to MP 23.786 – Surface texturing in both lanes; right lane rate of application for the rejuvenator (Reclamite) was 0.05 gal/sqyd; left lane rate of application was 0.05 gal/sqyd • MP 23.786 to MP 23.692 – Surface texturing only (Skidabrader) • MP 23.670 to MP 23.521 - Surface texturing in both lanes; right lane rate of application for the rejuvenator (Reclamite) was 0.05 gal/sqyd; left lane rate of application was 0.05 gal/sqyd • MP 23.521 to MP 22.068 – Surface texturing in both lanes; right lane rate of application for the rejuvenator was 0.06 gal/sqyd; left lane rate of application for the rejuvenator was 0.06 gal/sqyd. • MP 22.068 to MP 21.712 – Control section and future project. • MP 21.712 to MP 21.529 – Rejuvenator only and placed on rumble strips on shoulders; rate of application for the rejuvenator was 0.05 gal/sqyd for both lanes. • MP 21.529 to MP 20.816 – Surface texturing in both lanes; right lane rate of application for the rejuvenator was 0.07 gal/sqyd; left lane rate of application for the rejuvenator was 0.06 gal/sqyd. • MP 20.816 to MP 18.000 – Joint Stabilizer (Joint Bond) for all longitudinal joints except crossovers at a rate of 0.05 gal/sqyd; a rate of application for the rumble strips was 0.06 gal/sqyd. • MP 18.000 to MP 17.800 – Control Section • MP 17.800 to MP 16.900 - Joint Stabilizer (Joint Bond) for all longitudinal joints except crossovers at a rate of 0.05 gal/sqyd; a rate of application for the rumble strips was 0.06 gal/sqyd. • MP 16.900 to MP 16.715 – Rejuvenator only on right lane; rate of application for the rejuvenator was 0.03 gal/sqyd. • MP 16.715 to MP 16.522 – Joint stabilizer using Reclamite on longitudinal joints and rumble strips; rate of application was 0.05 gal/sqyd, right lane only. • MP 16.522 to MP 16.335 - Joint stabilizer using Joint Bond on longitudinal joints and rumble strips; rate of application was 0.05 gal/sqyd for centerline joint; rate of application for rumble strip was 0.06 gal/sqyd, right lane only. • MP 16.335 to MP 16.145 – Control Section • Northbound • The northbound direction is a mirror image to the southbound side with the exception of the following: • MP 24.319 to MP 24.224 – Rate of application was 0.04 gal/sqyd of Reclamite for left lane only. • MP 24.224 to MP 22.068 – Rate of application was 0.05 gal/sqyd of Reclamite for left lane only. • MP 24.319 to MP 22.068 – Rate of application was 0.06 gal/sqyd of Reclamite for right lane only. • KY 233 • 500-foot test section of surface texturing in both directions.

  6. Surface Texturing

  7. Each Skidabrader unit blasts bird-shot size steel pellets onto the surface at 750 fps within its confined “blasting box”. The pellets and abraded material are vacuumed and separated via the unit’s unique vacuum system.

  8. The steel pellets are equivalent in size to shotgun birdshot.

  9. Then, specially designed electro-magnet trucks pass over the abraded area to pickup any steel pellets that may have remained on the pavement surface.

  10. The shot blasting process chips the top of the exposed aggregate creating additional “sharp” faces that improve the surface skid resistance and surface micro-texture.

  11. DUST

  12. Skid numbers have already been determined and will be obtained once surface abrasion has been completed and right after rejuvenator agent has been placed and 3 to 5 days after. KYTC will continue to monitor for the next 5 years.

  13. CL2 Asph Surf 0.38D PG64-22 with Rap Skid values comparable to HFS Skid Value dropped 5 points over 5 weeks

  14. Rejuvenator • Mix Design • Manufacture Recommendation • Absorption rate of less than 60 minutes • 0.05 gal per SQYD and 0.06 gal per SQYD • 0.05 absorbed in 30 min • 0.06 absorbed in 45 min • We selected the .05 gal/min and applied the 0.05 gal/min for the 1st mile. We then increase the rate to .0.6 gal/min due to absorption rate. 0.05 gallons per SQYD 0.06 gallons per SQYD

  15. What is a“Joint Stabilizer?” • Joint Stabilizer is a Polymerized Maltene Emulsion formulated to penetrate the longitudinal joint area quickly and to fortify the weakest area in new asphalt construction.

  16. Joint Bond Polymers

  17. Longitudinal Joint Stabilizer

  18. Joint Stabilizer penetrates into the pavement carrying the maltenes along with its unique polymers down into the upper 1/2” - 3/4” of the pavement where it restores flexibility and cohesive property of the AC while also reinforcing the treated area.

  19. Core Samples The cores are lab tested to determine the level of improvement in the asphalt cement’s viscosity and elastic modulus. 48 Cores were taken to determine DSR Values which includes control section. Testing of cores just getting started this month

  20. Goals • DSR testing • Skid Testing to monitor usefulness of Skidabrator • Crack Measurments • Visual Performance of increased surface life.

  21. Estimated Cost Break Down • Surface texturing: • 95885 SQYD @ $2 = $191770 • Rejuvenator: • 95885 SQYD @ $0.89 = $85338 • Longitudinal Joint Stabilizer: • 90296 LNFT @ $0.49 = $44245 • Pavement Striping: • 59544 LNFT @ $0.26 = $15481 • Total Cost = $336834

  22. Comparison Cost of Rejuvenator as compared to Micro Surfacing and Asphalt Surface No. 4A. Based off two contracts that was let on Hal Rogers Parkway. Rejuvenating project doesn’t have to remove pavement markers, thermo., and milling. Rejuvenator = $2.98/SYYD MicroSurfacing = $5.74 /SYYD No. 4 Surface = $4.95/SYYD

  23. Try Video • Special Thanks • Preventative Maintenance Partners • Billy Clements (Drone Video) • Tamara Bumgardner (DSR Testing and Drone) • Joe Link (Skid Testing) • Praneeth Nimmatoori (Laser Crack Measurement) • Drew Dowden (Go Pro Video) • Ronnie Corum (Signs)

More Related