1 / 7

60mm approx.

Template as part of temporary Services Support extending from outside TE bulkhead by 200mm. temporary position of clip whilst sealing. Octant template behind services. 60mm approx. Clip to template. 60mm approx. grommet in TE bulkhead. B6. B5. B4. B3. A template is needed in

jirair
Télécharger la présentation

60mm approx.

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Template as part of temporary Services Support extending from outside TE bulkhead by 200mm temporary position of clip whilst sealing Octant template behind services 60mm approx. Clip to template 60mm approx. grommet in TE bulkhead B6 B5 B4 B3

  2. A template is needed in addition to the main services support to which connector boxes are fastened 360 degs. Services support Services Support template TE bulkhead

  3. Quadrant Services Support Template eg one octant of quadrant A1 with 12 LMT sets,4 fibre sets and one DCS bunch all in ‘grommet modularity’ 24 23 22 21 20 19 18 17 16 15 14 13 R outside TE bulkhead Labelled lines marked on Template indicate LMT route Slots in template for LMT clips (which fasten LMTs to template) Fibre bunch fastening to template Fix to services support DCS bunch fastening to template

  4. Template made of Al sheet – marked with LMT positions etc for octant

  5. bulkhead LMTs clipped to template with clips away from bulkhead for sealing access between tapes

  6. LMTs clipped to template close to bulkhead for sealing in grommets

  7. Template with LMTs and one fibre bunch attached – tie threaded through holes

More Related