The Administrative Official

1. The Administrative Official Pacific Northwest Swimming May, 2013

2. Agenda • Goal • Background • Meet Staff & Structure • Requirements • Responsibilities • Pre-Meet • Requirements • Meet Manager • Seeding • Entries • Running the Meet • Requirements • Timing Adjustments • “Post”-Meet • Requirements • Scoring • Results • Constraints • Certification • Schedule • Summary

3. Fundamental GOAL • Right Swimmer • In the Right Lane • With the Right Time • And Appropriately Recorded!

4. Background • Texas LSC’s created a “Dry Side” official • 2011 Convention added the definition to the Technical Rules (102.14): • Expanded the definition of Admin. Referee • 2012 Convention mandated that all LSC’s implement the Admin. Official (AO) in 2013.

5. Meet Staff Structure • Pre-Meet • Meet Set-up • Meet Entries • Meet Entry Person and Meet Referee • Running the Meet • Swimming actually occurs • No-shows, DQ’s, records, etc. • Swimmers, Coaches, Officials, Timers, Lots & lots of other volunteers • “Post”-Meet • Scoring • Compiling • Recording • Meet Referee and Meet Manager Operator

6. Typical Meet Staffing

7. What is an Administrative Official? • Assistant to Meet Referee • Involved with all “dry” side details of a meet • Works closely with/oversees host team’s administrative staff • Entry chairperson • Clerk of Course • Timing system operator • Software operator (aka Hy-Tek, computer person, etc.) • Meet Director (?) • Equipment person (?)

8. Responsibilities • Responsible for the supervision of: • Entry and registration process • Clerk of Course • Timing Equipment Operator • Scoring Personnel • Responsible for the: • Accurate processing of entries and scratches • Seeding of heats (prelim, semi-final, final) • Determination of official time • Determination of official results • Publication and posting of results and scores • Other duties as assigned by the referee

9. AO ResponsibilitiesArea of Focus • Meet Information • Meet Manager set-up • Entries • Meet seeding and qualification • Positive check-in • Seeding • Times • Timing rules • Timing adjustments • Results and Scoring

10. Admin. Official Areas of Responsibility • Entries – Entry Chair + Clerk of Course • Initial • Scratches • Seeding • Timelines • Times – Timing System and MM Operators • Results/Scoring – MM Operator

11. Responsibilities • Like high school (NHFS) sign-off of meet results • Focus is on accurate times • Key skill: timing adjustments • Fundamental GOAL: • Right Swimmer • In the Right Lane • With the Right Time • And Appropriately recorded!

12. AO on the Deck • Not required when there is an Admin. Referee • Like a starter, is a separate position on deck • Can serve in one (or more) of the supervised positions • entry, Clerk of Course, timing system operator or scoring (MM) personnel • AO must be an another official in addition to the “wet”-side Officials

13. New Meet Staff Structure • Pre-Meet • Meet Set-up • Meet Entries • Meet Entry Person and Meet Referee + the Admin. Official • Running the Meet • Swimming actually occurs • No-shows, DQ’s, records, etc. • Swimmers, Coaches, Officials, Timers, Lots & lots of other volunteers • AND the Admin. Official • Post-Meet • Scoring • Compiling • Recording • Meet Referee and Meet Manager Operator + the Admin. Official

14. Pre-Meet

15. Pre-Meet Requirements • Thorough Knowledge of the Meet Information • Type of meet • Dual, Open, Invitational, Time Trial, Championship • Registration • Qualifying times • Event limits • Etc., etc., etc.

16. Meet Manager Overview • Naming the meet, building the database • Team Manager entries files • Importing entries: 4-hour rule for 12 & Under • Exceptions reports - entries • Registration recon - Attached vs. Unattached • Seeding entries • Psych sheet – eyeball for bad entry times

17. Requirements • Meet Manager Set-up • Event order • Event requirements • Meet format (timed finals or prelim/final) • Scoring • Heat sheet approval • Psych sheets • Qualified Entrants • Registration • Entry time (qualifying or de-qualifying) • Meet Manager Exception reports

18. Meet Information • Know the Meet Announcement! • Example: • Current USA and Pacific Northwest Swimming rules shall govern the conduct of the meet. Age of swimmer is determined as of May 29, 2009. • Swimmers are limited to four (4) individual events per day. • The meet will be pre-seededexcept for the 400/800/1500 Free and 400 IM, which will be deck seeded. A swimmer may enter either the 800 or 1500 Free, not both. The 400/800/1500 Freestyle will alternate Females and Males and require the following: • The swimmers to provide their own counters and timers. • Positive check-in approximately 1 hour before the event. Seeding procedures will comply with USA Swimming 2009 Rules & Regulations Rule 207.12.7.A. • Failure to check in will prohibit seeding in any positive check-in event; exceptions to this rule are at the Meet Referee’s discretion.

19. Seeding the Meet • Defined in the Meet Information • Seeding structure: • Timed Final (slowest to fastest) • Championship (circIe seeded) • Exceptions: • Distance (may be fastest to slowest) • Flights of an event

20. Seeding Considerations • Deck-seeded events – POSITIVE CHECK-IN • Printing lists for check-in • Psych sheet • By gender, by age group • By time or alphabetically; by team? • Insuring accuracy • Must be able to tell check-ins, scratches and no-shows • Process scratches (next session) • Seed • Generate heat sheets, lane timer sheets, timeline, download to scoreboard • Distribute and post • Backup!!

21. Entry Considerations • Checking entries • Error reports • Hy-Tek – wrong age group, q-times, etc. • USA-S – registration issues, proof of time • Psych sheets • Eyeballs • Changing entries • Maintaining integrity of database • Paper trail – the Computer Change Form • This all should be done by the Entry Chair when you arrive to work • You are responsible!

22. Other Entry Issues • Late, forgotten check-in • Have a reason for what you do and be CONSISTENT • Communicate with ALL the people who need to know • Announcer • Deck Referee • Timing console, computer operator • Timers • Coaches • Entry problems • Track down reason for error • Don’t punish an athlete for a clerical mistake • Find a place for him/her to swim • Create a new heat if necessary • Reseed if necessary (CLEARLY MARK THE RESEED) • Communicate

23. Running the Meet

24. Requirements • Clerk of Course roles • Event check-in • Deck entries • Scratches from prelims or finals • Scratches • 30 minute scratch rule • Intent to scratch

25. Data Flow at a Meet ENTRIES TIMING JUDGE MEET MANAGER RESULTS AWARDS TIMING CONSOLE TIMERS CHANGES PLACE JUDGE - OOF DQs No shows Scratches

26. Other Entry Issues - Reseeds • When an “Oops” happens…. • Consider gravity of situation – first meet of season vs. championship • Consult with/listen to coach • Seek input from Meet Ref • When you choose to reseed: • Make correction or adjustment, and reprint meet program for that event only • Mark original as RESEED • Copy on colored paper • Different color for each event if multiple reseeds • Announce reseed, availability of reseeded programs, post near blocks • Print new lane timer sheets • Distribute heat sheets to deck personnel, timing system operator, announcer

27. No Shows • Not synonymous with “Scratch” • No penalty at meet – no problem • Recorded as NS in Hy-Tek for event • Penalty meets • Establish a paperwork flow to handle • Who fills in on deck? • Where to turn in • System to determine next event/day penalty

28. Computer Operator Responsibilities • Import race results into Meet Manager • By [Race #] or [Get Times] • Check for DQs in heat • Confirm any no-shows (empty lane) • Timing Console Operator and Lane Timer Sheets • Look for flagged timing discrepancies • Blue – pad faster than button • Yellow – button faster than pad • Resolve discrepancies using watch times to help determine why difference occurred; order of finish also helpful

29. Meet Manager DQ Codes • Butterfly • 1A Alternating Kick • 1B Kick breaststroke type • 1C Scissors kick • 1E Non-simultaneous arms • 1F Arms underwater recovery • 1J One hand touch • 1K No touch • 1L Non-simultaneous touch • 1M Shoulders not at or past vertical towards breast off the wall • 1N Head did not break the surface by 15 meters

30. Meet Manager DQ Codes (con’t.) • Backstroke • 2I No touch at turn • 2J Non-continuous turning action • 2K Not on back off wall • 2L Shoulders past vertical toward breast • 2N Head did not break the surface by 15 meters • 2P Toes curled over gutter after the start • 2Q Did not finish on back • 2R Completely submerged prior to turn or finish • 2S Delay initiating arm pull at turn • 2T Delay initiating turn after past vertical • 2U Multiple strokes past vertical at turn

31. Meet Manager DQ Codes (con’t.) • Breaststroke • 3A Alternating Kick • 3B Non-simultaneous kick • 3C Downward butterfly kick • 3D Scissors kick • 3E Hands brought beyond the hipline during stroke • 3F Non-simultaneous arms • 3G Arms two strokes underwater • 3H Arms not in same horizontal plane • 3I Elbows recovered over water • 3J One hand touch • 3K No touch • 3L Non-simultaneous touch • 3M Shoulders not at or past vertical towards breast off the wall • 3P Head under for 2 or more strokes • 3Q Incomplete stroke cycle other than one pull followed by one kick

32. Meet Manager DQ Codes (con’t.) • Freestyle • 4K No touch on turn • 4N Head did not break the surface by 15 meters • IM • 5P Strokes out of sequence

33. Timing Rules • No swimmer shall be required to re-swim a race due to equipment failure • Official times achieved at USA-S sanctioned or approved meets • Prelim or final heat • Swim-off • Lead-off leg of a relay • Split time for initial distance • Must complete race without disqualification • Freestyle event = freestyle time

34. Timing system basics • Automatic • Semi-automatic • Manual • Place judges • Each competition must have at least two systems • Automatic systems must have a manual backup

35. Using Automatic Equipment • Timing systems – Colorado, DAK, IST, Omega, etc. • Fully automatic (Pads) • Clock starts with starter’s “beep” and stops when swimmer hits pad • Semi-automatic (Buttons) • Clock starts with starter’s “beep” and stops when timer depresses plunger • A timer may operate only one device from each system per lane – i.e., one watch, one button!

36. All systems have different accuracy! • When functioning, fully automatic system has no human reaction time issues • Swimmer not touching pad, or touching late another issue • Semi-automatic has timer reaction at end of race • Manual watch has timer reaction at beginning and end of race

37. Using Stopwatches • Times recorded only to hundredths • 2 decimal places (.01) • No rounding • Only one watch = official time • Two watches – average = official time • Three watches – middle watch = official time

38. Determining Official Times • When recorded properly, the pad time shall be the official time. • A primary system malfunction may have occurred when: • Difference between the time obtained by the primary system and the back-up system(s) is more than 0.30 seconds • Flagged by timing systems and by Hy-Tek • A late or missed touch is reported by an official observing the finish.

39. Timing Adjustments

40. Situations • Timing Adjustments • Lane malfunction • Heat malfunction • Incorrect heat number • Missing swimmer • Non-communicating timing system

41. Timing System Adjustments • When a primary system malfunction is determined, the back-up time(s) shall be adjusted for the differences in timing systems and then integrated with accurate primary times to establish official times and order of finish. • Never take a good pad time away from a swimmer! • Timing system difference adjustment can be calculated • By the automatic or semi-automatic system by design • Check Colorado, turn off “Use Automatic Backup Time Adjustment” • By calculating the consistent average difference between the primary and back-up systems used at that meet • Manually or within Hy-Tek

42. Timing Adjustment Practice • Get watch times(s) for the lane in question, compare to pad and button • If pad time is reasonably close to watch time, delete the bad button and replace with good watch time • No MM adjustment • If button time is reasonable close to watch time, calc • Accept MM adjustment – print report before accepting • If there is no button and pad is invalid, compute average difference between valid pads and watches, apply to watch time • Use order of finish as a secondary piece of evidence to confirm your decision

43. Timing Adjustments on the MM Side • Pad < button by 0.3 seconds or more • Blue highlight • Usually the pad is correct • Slow timer reaction or bad button • Pad > button by 0.3 seconds or more • Yellow highlight • The button may be the better data - investigate • Soft or missed touch • Each situation must be investigated – you don’t know until you look! • A thought to cogitate: The same person is pushing the button and the watch! • Have a reason to believe the pad failed!

44. Timing Adjustment #1 Check watch times: 2:27.81 2:27.72 Check order of finish: 5-3-6-4 Conclude that pad was good; enter a backup time from watch in Backup 2 slot Do nothing else (perhaps watch timer in Lane 4, talk with him/her) No back-up

45. Timing Adjustment #2 (Lane) Watch time supports button – late pad touch Order of finish: 4-3-5-6-8-2-1-7

46. Timing Adjustment #2 (Lane) Order of finish: 4-3-5-6-8-2-1-7

47. Timing Adjustment #3 (Heat) • What happens when the timing system starts late? Or not at all? • How do you know?? • You don’t just use the watch times! • Need to take timing system difference into account • Determine average difference between pads and watches

48. Timing Adjustment #3 - Heat Enter watch times Compute difference between pads and watches Find average difference Add to pad time to determine official “adjusted” time OR Accept adjusted

49. Timing Adjustment #4 Heat Number • Scenario – 15 heats of 50 Free; when the scoreboard says Heat 12, the Deck Ref lets you know that the scoreboard is wrong for the heat that is in the water (Heat 13). The Deck Ref knows the scoreboard was correct at the beginning of the event. He does not know when the scoreboard/timing console got out of sync.

50. Timing Adjustment #4 Heat (con’t.) • What to do? • Immediately inform the timing console operator to advance the current race in the water by one heat • Have the Deck Referee wait to start heat 14 until the timing console is on the correct heat