1 / 16

FB 2 STARTING PROCEDURES

FB 2 STARTING PROCEDURES. Assess readiness to get underway Energize the following: 1) Radio Master Switch, Panel DC-1. RADIO MASTER SWITCH UP IS “ON”. NOTE

johnsonjoyce
Télécharger la présentation

FB 2 STARTING PROCEDURES

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. FB 2 STARTING PROCEDURES Assess readiness to get underway Energize the following: 1) Radio Master Switch, Panel DC-1 RADIO MASTER SWITCH UP IS “ON” NOTE This energizes the pre-adjusted, fixed mount radios (three Marine VHF radios and the LAFD “Astro” 800 MHz radio at the Chart Table).

  2. FB 2 STARTING PROCEDURES Chart Table Consoles Forward and Aft Energize the following:

  3. FB 2 STARTING PROCEDURES Energize the following: LAFD MOTOROLA (handheld) radio

  4. FB 2 STARTING PROCEDURES Loudhailer CLOCKWISE for “ON” Energize the following:

  5. FB 2 STARTING PROCEDURES ARDF, Forward Center Console Energize the following: Radio Direction Finder

  6. FB 2 STARTING PROCEDURES UP FOR “ON” MIDDLE POSITION FOR “OFF” DOWN FOR EMERGENCY POWER SUPPLY SELECT DIRECTION OF TRAVEL Lighting (navigation and emergency) as needed

  7. FB 2 STARTING PROCEDURES Emergency (blue) Lights

  8. FB 2 STARTING PROCEDURES MDT on Chart Table

  9. FB 2 STARTING PROCEDURES PITCH INDICATORS SET AT ZERO

  10. FB 2 STARTING PROCEDURES VOITH ZERO PITCH

  11. FB 2 STARTING PROCEDURES SHORE POWER ON LINE Verify green light(s) on Switchboard Monitoring Panel signifying Generator(s) ON LINE and Shore Power disconnected SHORE POWER AVAILABLE SHORE POWER CONNECTED PORT GEN RUNNING STBD GEN RUNNING PORT GEN ON LINE ILLUMINATED: SIGNIFIES STBD GEN ON LINE STBD GEN ON LINE

  12. FB 2 STARTING PROCEDURES YELLOW LED INDICATOR LIGHTS ILLUMINATE TO SIGNIFY “READY FOR OPERATION” and “REMOTE OPERATION” • Verify that Main Engine MTUs in Pilot House indicate “READY FOR OPERATION” and “REMOTE OPERATION”

  13. FB 2 STARTING PROCEDURES PRELUBE START PRELUBE COMPLETE Start Main Engines upon completion of PRELUBE sequence

  14. FB 2 STARTING PROCEDURES Start Main Engines upon completion of PRELUBE sequence MAIN ENGINE START Communicate with Mate at Bow; order “Cast off all lines” Proceed upon “All Clear” signal from Mate

  15. FB 2 STARTING PROCEDURES MATE In charge of deck operation Verify that Off Ship Alarm is turned to “OFF” position before Shore Power is turned off Assess Fireboat 2 for readiness to cast off Bow Watch Communication Pilot to Mate: “Cast off” Mate to Deckhands: “Cast Off” Mate to Pilot: “All clear to get underway”

  16. FB 2 STARTING PROCEDURES

More Related