1 / 15

MRA stands for “Mutual Recognition Arrangement”

An Understanding of the ASEAN MRA on Engineering Services By: Engr. Rocky H.T. Wong, FIEM, PEng Hon. FAFEO ASEAN Engr. For the Forum organised by the IEM Electrical Engineering Technical Division, Hotel Singgahsana, P.J., Malaysia Sat., 28 April 2007.

jonathonl
Télécharger la présentation

MRA stands for “Mutual Recognition Arrangement”

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. An Understanding of the ASEAN MRA on Engineering Services By: Engr. Rocky H.T. Wong, FIEM, PEngHon. FAFEO ASEAN Engr.For the Forum organised by the IEM Electrical Engineering Technical Division,Hotel Singgahsana, P.J., MalaysiaSat., 28 April 2007 RWHT/IEMEETD/Forum Rev (1) 240407

  2. The ASEAN MRA on Engineering Services (CPC8672) was signed by all the 10 ASEAN Economic Ministers on the side-line of the 11th ASEAN Summit, Kuala Lumpur, December 2005. • It is more than a year since 9th December 2005, when the MRA came into being, yet it has not been operationalised! Why?

  3. MRA stands for “Mutual Recognition Arrangement” • An MRA for a specific sector is to facilitate free trade in that sector specific, with least limitations and absence of Technical Barriers to Trade (TBT). • An MRA is regulators-driven, during framing & operation.

  4. The startline and template: WTO/GATS; Either AFTA/AFAS MRA; Or FTA MRA. • For WTO/GATS PLUS; “F” for “Free”, or “preFerential” in either AFTA, or FTA.

  5. Trade in Services; 4 modes of supply: • Mode 1 – Cross border trade; • Mode 2 – Consumption abroad; • Mode 3 – Commercial presence; and • Mode 4 – Presence of natural persons. • Limitations may be attached to the Schedulings of National Commitments • Limitations of commitments – comparable to tariff concessions for trade in goods

  6. In the context of trade in services; domestic regulatory regime and measures equivalent to TBT • ASEAN Vision 2020; end goal of AFTA ASEAN Economic Community (AEC) by way of ASEAN Economic Integration (AEI) meaning an ASEAN – wide common market and a borderless production base no limitations for schedulings of commitments among ASEAN member countries?

  7. In AFTA, AFAS deals with trade in services under CCS. • The ASEAN MRA on Engineering Services is the first MRA on services signed by ASEAN – member countries; the time then was to do the “Doables” - hence only Engineering Service (CPC 8672) was dealt with.

  8. The characteristic and contexts of the MRA; • Objectives: - (i) to facilitate mobility of engineering services professionals; and (ii) to exchange information in order to promote adoption of best practices on standards and qualifications • PRA MC peer-based regulation for MRA operation.

  9. To qualify as an ASEAN Chartered Professional Engineer (ACPE) the natural person engineer must have:- • Completed an Accredited Engineering Degree; • Licensed (by domestic PRA) to practice independently; • No less than 7 years experience after graduation – with at least 2 years in responsible charge of significant work; • CPD – in compliance to national policy; • Certified (by domestic PRA) to be free of serious violation of “acts”; • Screened by and registerd with ACPECC secretariat (yet to be established) upon payment of registration fee.

  10. An ASEAN natural-person engineer now registered an ACPE with the ACPECC Secretariat (and concurrently registered by the domestic PRA’s MC), and who wishes to practice (not in independent practice) in a host (other ASEAN) country in collaboration with a local ACPE, must apply to the said host nation’s PRA (MC) to be a RFPE (and again to pay another registration fee?)

  11. On the other hand, at the ASEAN peer-grass-roots level, we have the ASEAN Federation of Engineering Organisations (AFEO) and the downstream ASEAN Engineers Register (AER) which established the following as qualifications for a natural person to be registered as an ASEAN Engineer:- • Engineering degree recognized by domestic institution; • Corporate member of domestic institution, and licensed to practice; • Minimum 7 years post graduate working experience in an engineering environment; and • Subscribe to CPD.

  12. Among the objectives of the AER are:- • Continuous updating of engineering capabilities; • Harmonise the standard of engineering practice; and • Gain international recognition to facilitate the mobility of ASEAN Engineers

  13. The AER and AFEO have adopted the ASEAN Engineering Code of Practice which is listed below:- • Code of Ethics; • Accreditation Procedure; • Professional Assessment Process; • Continuing Professional Development (CPD); and • Policy Statement on Design Codes and Standards.

  14. Question : How to operationalise the ASEAN MRA on Engineering Services using ASEAN peer-grass-roots standards of the universally accepted Code of Practice of engineering services? • And, what about Integrated Engineering Services (CPC 8673)?

  15. THANK YOU

More Related