1 / 11

The Temperature Measurement and Display Example

The Temperature Measurement and Display Example. Level 0:. Present a single module block diagram with inputs and outputs identified Present the functional requirements: inputs, outputs, and functionality. Level 0: Functional Requirement for Temperature Measurement and Display.

jpagan
Télécharger la présentation

The Temperature Measurement and Display Example

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. The Temperature Measurement and Display Example

  2. Level 0: • Present a single module block diagram with inputs and outputs identified • Present the functional requirements: inputs, outputs, and functionality.

  3. Level 0: Functional Requirement for Temperature Measurement and Display

  4. Level 1: Block Diagram for Temperature Measurement and Display System

  5. Level 1: Functional Requirement for Temperature Conversion Unite

  6. Level 1: Functional Requirement for A to D Converter

  7. Level 1: Functional Requirement for BCD Conversion Unit

  8. Level 1: Functional Requirement for BCD Conversion Unit

  9. Level 1: Functional Requirement for 7-Segment LED Driver

  10. Designer must make judgment whether Level 1 is the realizable level… If so, temperature conversion may be accomplished using one of the following circuits. The designer or the design team may apply AHP to determine which circuit is preferred.

  11. Other designers may argue that… • The circuit may be broken circuit down to Level 2 • And to further look into the internal functionalities and structures of RTD, resistors, transistors, and op-amps.

More Related