1 / 13

Proposal –Radio Resource Measurement Capability Enabled Bitmask IE

Proposal –Radio Resource Measurement Capability Enabled Bitmask IE. Date: 2007-08-23. Authors:. Abstract. This document is a submission for Radio Resource Measurement Capability Enabled Bitmask Information Element. Corresponding normative text is in document 07/2285r0.

justinedwards
Télécharger la présentation

Proposal –Radio Resource Measurement Capability Enabled Bitmask IE

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Proposal –Radio Resource Measurement Capability Enabled Bitmask IE Date: 2007-08-23 Authors: Ganesh Venkatesan, Intel Corporation

  2. Abstract This document is a submission for Radio Resource Measurement Capability Enabled Bitmask Information Element. Corresponding normative text is in document 07/2285r0. This proposal addresses part of CID #12 (LB96#25-Palm) and SB CID #421:There are too many varied procedures here. It is unlikely that implementations will implement all of the procedures. Each of the supported procedures/reports should be separately indicated and negotiated* * Not Addressed by this submission Ganesh Venkatesan, Intel Corporation

  3. Rationale • 802.11k is a collection of measurement tools • Some measurements require additional resources and devices may choose not to implement them • When a device advertises support for 802.11k (dot11RadioMeasurementEnabled is TRUE), it is not clear what RRM • is supported (and enabled) and • what is not supported • A STA will have to send one or more measurement requests and analyze the received reports to comprehend what the measuring STA is capable of • A simple method is to advertise RRM capability via a RRM Capability Enabled Bitmask IE Ganesh Venkatesan, Intel Corporation

  4. RRM Capability Enabled Bitmask IE • Bits in the IE Indicate which of the RRMs are supported by the STA • MIB attribute dot11RadioMeasurementEnabled = TRUE means • Capability Information Field:12 is set • that the STA is capable of receiving RRM requests and responding • RRM Capability Enabled Bitmask is present in Probe Response, [Re]Association Request and [Re]Association Response if dot11RadioMeasurementEnabled is TRUE • Adds 4 octets to the above frames Ganesh Venkatesan, Intel Corporation

  5. RRM Capability Enabled Bitmask IE (Octet-1) Ganesh Venkatesan, Intel Corporation

  6. RRM Capability Enabled Bitmask IE (Octet-2) Ganesh Venkatesan, Intel Corporation

  7. RRM Capability Enabled Bitmask IE (Octet-3) Ganesh Venkatesan, Intel Corporation

  8. RRM Capability Enabled Bitmask IE (Octet-4) Ganesh Venkatesan, Intel Corporation

  9. Measurement Pilot Capability Ganesh Venkatesan, Intel Corporation

  10. MP Interval from Measurement Pilot Capability Ganesh Venkatesan, Intel Corporation

  11. RRM Capability Enabled Bitmask IE (format) • Bit = 1: implies that the device • Implements support the corresponding RRM and • The corresponding RRM is enabled in the device • Exceptions are bits • 20-22 Support for maximum Measurement Duration • 24-26 Support for Measurement Pilot Ganesh Venkatesan, Intel Corporation

  12. Normative Text Changes • Minimal change to the amendment: • Define Radio Resource Measurement Capability IE • Add the IE to Probe Response, Association Request and Reassociation Request frames • Fix Clause 11.10.5 to describe the semantics of the bits in the RRM Capability Enabled IE: • bit set implies that the station will never respond (for the duration of the current association) to the request with a report indicating that it is ‘incapable’ of performing the measurement. • A STA receiving a measurement request that it advertises to support in the Capability IE can always respond with a report indicating that it is ‘refusing’ to perform the measurement. • Fix Annex-A • Fix Annex-D Ganesh Venkatesan, Intel Corporation

  13. Feedback? Ganesh Venkatesan, Intel Corporation

More Related