1 / 10

Cervical Traction

Cervical Traction. Chapter 17. Cervical Traction. Tension must overcome weight of skull Approximately 8.1% of total body weight 14 pounds Tension: Supine and Seated Supine: Approximately 7% of body weight (10 lbs) Reclined: Approximately 20% of body weight (24 lbs) Treatment Time

kalil
Télécharger la présentation

Cervical Traction

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Cervical Traction Chapter 17

  2. Cervical Traction • Tension must overcome weight of skull • Approximately 8.1% of total body weight • 14 pounds • Tension: Supine and Seated • Supine: Approximately 7% of body weight (10 lbs) • Reclined: Approximately 20% of body weight (24 lbs) • Treatment Time • Depends on the pathology • Approximately 5 to 20 • Use comfort as a guide

  3. Degenerative disc disease Nerve root compression Disc herniation Muscle spasm Osteoarthritis or facet joint inflammation Capsulitis of vertebral joints Pathology of anterior or posterior longitudinal ligaments Indications

  4. Contraindications • Pain of unknown origin • Acute injury • Unstable spinal segments • Cancer, meningitis, or other spinal cord/ vertebrae disease • Vertebral fracture • Extruded disc fragments

  5. Wall or door-mounted traction Sitting or Prone Uses water bags, sand bags, or weight plates Mechanical Traction

  6. Mandibular-occipital harness Places pressure on the TMJ which may cause discomfort Occipital harness Forcse on skull’s occipital bone Can be used to place spine in varying degress Mechanical Traction

  7. Mechanical Traction Application • Assess body weight • Remove material that may interfere with halter • Adjust halter accordingly • Bilateral = midline of body • Secure and connect halter • Align angle of pull to correspond with the specific pathology • Give patient Safety Switch • Explain treatment

  8. Initiation of Treatment • Set controls to zero and turn on unit • Remove slack • Adjust Ratio • Normally 3:1 or 4:1 • Tension • Approximately 10 pounds or 7% of body weight • First exposure use lower tension • Duration • Corresponding to pathology

  9. Termination of Treatment • Tension • Gradually reduce over 3 or 4 cycles • Gain slack and turn unit OFF • Remove halter from unit and patient • Patient remains in position for 5 minutes after the treatment

  10. Manual Traction • Changes in tension, angle of pull, and duration are more easily adjusted when compared to mechanical traction • Nondominant hand cradles the occiput • Dominant hand under nondominant • Pulls using bodyweight • Can be administered in sustained or intermittent modes

More Related