1 / 66

Lectures co-financed by the European Union in scope of the European Social Fund

Crystallography and Diffraction. Theory and Modern Methods of Analysis Lectures 9-10 Powder Diffraction Dr. I. Abrahams Queen Mary University of London. Lectures co-financed by the European Union in scope of the European Social Fund. Powder Diffraction.

Télécharger la présentation

Lectures co-financed by the European Union in scope of the European Social Fund

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Crystallography and Diffraction. Theory and Modern Methods of Analysis Lectures 9-10Powder DiffractionDr. I. AbrahamsQueen Mary University of London Lectures co-financed by the European Union in scope of the European Social Fund

  2. Powder Diffraction In order to observe a diffracted X-ray beam from a single crystal, the crystal must be rotated with respect to the incident X-ray beam so that a particular set of hkl planes makes the correct angle hkl with the incident beam so as to satisfy Bragg’s law. Crystalline powders contain large numbers of small crystallites, each of which is randomly orientated. Therefore at any one time all the allowed hkl planes will be correctly orientated in the X-ray beam. i.e for every possible hkl some crystals will make the correct hkl for diffraction to occur. Crystal 1 shows the (002) sets of planes but is not correctly aligned with the incident beam 2 shows the same crystal with the parallel set of (001) planes which are correctly aligned, so diffraction occurs 3 shows another crystal where the (002) planes are correctly aligned so diffraction occurs. 1 2 3 Lectures co-financed by the European Union in scope of the European Social Fund

  3. Powder Diffractometer In the laboratory X-ray powder method a single wavelength of collimated X-ray beam is incident to the powder. The diffracted beams are subsequently observed by radiation detectors. The resulting diffracted beams can be measured and the corresponding d-spacings calculated. The final results are essentially intensity versus d-spacings (or 2). Modern diffractometers are computer controlled and allow for fast and efficient data collection and subsequent analysis. Lectures co-financed by the European Union in scope of the European Social Fund

  4. Powder Diffractometer Lectures co-financed by the European Union in scope of the European Social Fund

  5. Modern PanAlytical X’Pert Pro diffractometer with Bragg-Brentano / focusing geometry. Lectures co-financed by the European Union in scope of the European Social Fund

  6. Lectures co-financed by the European Union in scope of the European Social Fund

  7. Powder Neutron Diffraction Neutrons with wavelengths of around 1 Å can be used for diffraction purposes. Neutrons are scattered by nuclei and this has important consequences for the nature of the diffraction data obtained. Some physical properties of thermal neutrons The de Broglie equation relates to the neutron mass and velocities to wavelength. Therefore, the neutrons generated from reactors or pulsed sources at certain speeds can be in useful ranges for diffraction experiments. Lectures co-financed by the European Union in scope of the European Social Fund

  8. The scattering power (scattering length b for neutrons or scattering factor f for X-rays) of an atom towards neutrons is different than it is towards X-rays. This is mainly because neutrons are scattered through interaction with atomic nuclei rather than atomic electrons as occurs with X-rays, making the relationship between the neutron scattering length of an atom and its atomic number weak Lectures co-financed by the European Union in scope of the European Social Fund

  9. Advantages of neutron diffraction In systems containing light and heavy atoms X-ray scattering will be dominated by scattering from the heavy atoms, while neutron scattering does not show this correlation and it is often easier to locate light atoms in the presence of heavier ones. Able to distinguish between neighbouring elements in the periodic table such as manganese and iron or cobalt and nickel. Isotopic substitution experiments possible as scattering lengths of isotopes differ. Less dependence of scattering on Bragg angle,  , leading to greater intensity at higher angles. Lectures co-financed by the European Union in scope of the European Social Fund

  10. Lectures co-financed by the European Union in scope of the European Social Fund

  11. Ref: Neutron Diffraction, Bacon Clarendon Press 1975. Lectures co-financed by the European Union in scope of the European Social Fund

  12. Neutron diffraction is also a powerful technique for the study of magnetic structure. Neutrons possess a spin of ½ and therefore, have a magnetic dipole moment that can interact with unpaired electrons (mostly in d or f orbitals) giving rise to an additional scattering effect. In diffraction experiments, where magnetic ordering may occur over different length scales to the crystallographic ordering, this gives rise to magnetic superlattice peaks in the diffraction pattern. Lectures co-financed by the European Union in scope of the European Social Fund

  13. e.g. Antiferromagnetic transition in MnO Ref: Solid State Chemistry and its applications A.R. West, Wiley 1984. Lectures co-financed by the European Union in scope of the European Social Fund

  14. Lectures co-financed by the European Union in scope of the European Social Fund

  15. Neutron sources Two main types of neutron sources. 1. Reactor Sources e.g. ILL High Flux reactor source. Neutrons produced as a product of the fission of 235U. Neutrons can then be moderated to give a range of energies and then conducted to different instruments via guide tubes. Diffraction experiments are normally at a constant wavelength, but can also be energy dispersive. 2. Pulsed Sources e.g. ISIS Proton spallation source. Pulses of protons are accelerated in a synchrotron and then fired at a heavy metal target (tantalum in this case) to generate neutrons. These can be moderated or used directly. A Maxwellian distribution of energies is produced. Diffraction experiments normally use a large range of energies (time of flight method). Lectures co-financed by the European Union in scope of the European Social Fund

  16. The time of flight method Schematic diagram of the time-of-flight powder diffractometer The distance between the moderator and the sample is L0, with the detector located at a distance L1 from the sample. A variable wavelength/fixed angle scan is used. The variation of wavelength arises due to the time distribution of neutrons arriving at the detector following the initial pulse and hence this is known as the time-of-flight method. For high resolution L0 is large  greater distribution of energies. Lectures co-financed by the European Union in scope of the European Social Fund

  17. Combining the de Broglie and Bragg equations: The neutron velocity is given by: Thus Lectures co-financed by the European Union in scope of the European Social Fund

  18. d-spacing t.o.f Lectures co-financed by the European Union in scope of the European Social Fund

  19. Multiplicities In powder diffraction because three-dimensional space is reduced to one dimension in the powder pattern then if two sets of planes have the same d-spacing they will both contribute to the same peak. e.g. For cubic crystals Therefore multiplicity = 6 Two different reflections (not hkl permutations) may also have the same d-spacing e.g. In cubic crystals Lectures co-financed by the European Union in scope of the European Social Fund

  20. Characterisation of Materials by Powder Diffraction X-ray powder diffraction is a fundamental tool for materials characterisation. e.g. (1) Qualitative analysis (2) Unit cell refinement (3) Structure refinement (4) Structure determination (5) Quantitative analysis (6) Phase transition studies (7) Superlattice identification (8) Kinetic studies (9) Crystallite size determination (10) Strain analysis (11) Preferred orientation (Texture) Lectures co-financed by the European Union in scope of the European Social Fund

  21. Qualitative Analysis The primary role of the majority of X-ray powder diffractometers is phase identification. This relies on the fact that every unique crystal structure has its own unique powder pattern, i.e. its own fingerprint. PDF The Powder Diffraction File (PDF-2, PDF-3 or PDF-4) represents the most complete database of powder diffraction data. The database can be searched in a number of ways by a variety of commercial search engines. A typical search would involve the loading of a powder pattern and automatic measurement of the diffraction peaks. These would then be compared to those in the database and matches ranked according to how good the match is. To narrow the search it is advisable to restrict the search to compounds containing only those elements you know were in the reaction mixture. Lectures co-financed by the European Union in scope of the European Social Fund

  22. Lectures co-financed by the European Union in scope of the European Social Fund

  23. Lectures co-financed by the European Union in scope of the European Social Fund

  24. Lectures co-financed by the European Union in scope of the European Social Fund

  25. Crystallographic Databases ICSDInorganic Crystal Structure Database ca. 50,000 Inorganic compounds CSDCambridge Structural Database, Organic/Organometallic Structures > 100,000 compounds CDIFCrystal class and unit cell data PDBProtein database MDFMetals Data file Lectures co-financed by the European Union in scope of the European Social Fund

  26. ICSD on the Web Lectures co-financed by the European Union in scope of the European Social Fund

  27. Lectures co-financed by the European Union in scope of the European Social Fund

  28. Using crystallographic data, powder diffraction patterns may be calculated using a variety of software: e.g. LAZY-PULVERIX POWDER-CELL Lectures co-financed by the European Union in scope of the European Social Fund

  29. Unit cell refinement Assuming that you have been able to identify phases and index the powder pattern, it is often useful to refine unit cell dimensions. This is particularly important if you want to identify solid-solutions. (1) Measure the peaks accurately (2) Index the peaks (3) Refine the unit cell dimensions and zero-point correction. There are a number of programs available to do this. However they all rely on accurate peak measurement. Some incorporate automatic peak measurement Often where the structure is known you are better off carrying out a Rietveld refinement. Alternatively a LeBail type fit can be carried out. Lectures co-financed by the European Union in scope of the European Social Fund

  30. Lectures co-financed by the European Union in scope of the European Social Fund

  31. Lectures co-financed by the European Union in scope of the European Social Fund

  32. e.g. Thermal variation of cubic lattice parameter in Bi3YO6 Lectures co-financed by the European Union in scope of the European Social Fund

  33. Structure Refinement The Rietveld method is a structure refinement technique for powder diffraction data which fits the whole powder pattern including peak shapes and background. This will be dealt with in the next set of lectures. Lectures co-financed by the European Union in scope of the European Social Fund

  34. Structure Determination For structure refinement an initial structural model is required before refinement can proceed. In structure determination the initial model is found using an ab-initio approach. There are a number of stages in structure determination (1) Unit cell determination and indexing (2) Space Group identification (3) Intensity extraction (4) Initial model determination (5) Rietveld refinement (6) Difference Fourier maps generated to locate remaining atoms (7) Final Rietveld Refinement Lectures co-financed by the European Union in scope of the European Social Fund

  35. Unit cell determination and indexing There are a number of methods for indexing. All require accurate measurement of diffraction peaks. Consider a cubic unit cell. You will recall: Let n = h2 + k2 + l2 In a cubic system only certain values of n are possible Lectures co-financed by the European Union in scope of the European Social Fund

  36. Lectures co-financed by the European Union in scope of the European Social Fund

  37. We may express Bragg’s law in the form: Since for a cubic cell: Substituting: Now since Is a constant for a particular cell then on dividing sin2 by the allowed values of n the value of the constant should be evident and hence the value of a derived. Examples to be given in workshops Lectures co-financed by the European Union in scope of the European Social Fund

  38. The same rules can be applied for tetragonal and orthorhombic cells, but it gets more complicated. For tetragonal cells we have two constants: Allowed values of h2+k2 are 1,2,4,5,8… To can obtain C we can use the differences and look for Cl2 values in the correct ratios. Lectures co-financed by the European Union in scope of the European Social Fund

  39. Today, this type of indexing is done automatically Typically 20 peaks or more are used. These should include all the high d-spacing peaks. The most popular programs are Visser ITO TREOR DICVOL Typically these programs will offer a number of possible solutions. Lectures co-financed by the European Union in scope of the European Social Fund

  40. Most automatic indexing programs work with reciprocal space Q values where: Thus in the general triclinic case there are 6 unknowns in reciprocal space: Two basic approaches are used to solve this equation. The Shirley method works through the different crystal systems starting with cubic and increments the lattice parameters until a solution is found. The ITO method starts with triclinic symmetry and tries to find a solution and work out the higher symmetry from this. Lectures co-financed by the European Union in scope of the European Social Fund

  41. TREOR output for bismuth zirconium vanadate Lectures co-financed by the European Union in scope of the European Social Fund

  42. Once a unit cell is found one must decide whether it is the correct cell. In order to do this one must determine the reduced cell (the simplest primitive unit cell) and then see if there are any other higher symmetry cells. For every normal unit cell there may be many alternative cells, but for all of these there is only one reduced cell. This is done routinely in single crystal diffraction but often forgotten in powder diffraction. Today there automatic procedures for calculating the reduced cell. Le-Page is a freely available software package that will calculate the reduced cell and examine the parameters for higher metric symmetry. Lectures co-financed by the European Union in scope of the European Social Fund

  43. Le-Page screen for MgO showing reduced cell for cubic F-centred cell. Lectures co-financed by the European Union in scope of the European Social Fund

  44. Space Group Assignment Space group assignment is carried out using systematic absences in the reflection data. Intensity Extraction Intensity extraction is usually carried using either the method of Pawley or Le-Bail. These will be dealt with in the next lectures. Both methods use a Rietveld-like approach in that they fit the whole pattern, but with no structural model. These methods rely on accurate high resolution data since peak overlap needs to be minimised. The result is a set of quasi-single crystal data which can be analysed using standard single crystal packages. Lectures co-financed by the European Union in scope of the European Social Fund

  45. Determination of Initial Model Three methods are now commonly used. (1) Patterson vector density methods (2) Direct methods (3) Probabilistic methods The first two are identical to the single crystal methods already discussed. Lectures co-financed by the European Union in scope of the European Social Fund

  46. Quantitative Analysis For mixtures of phases X-ray powder diffraction can be used to quantify the different fractions present. In some cases it may be the only method possible for example a mixture of different phases of silica. There are a number of well established methods. 1. Standard Additions (Lennox, 1957) 2. Absorption diffraction (Alexander and Klug, 1948, Smith et al 1979) 3. Internal standard (Klug and Alexander, 1974) Multiphase refinement using the Rietveld method now offers a quick and accurate way to determine phase fractions through multi-phase refinement. However: Accuracy is a problem. Remember the sensitivity of X-ray diffraction methods is estimated to be  5% error. Lectures co-financed by the European Union in scope of the European Social Fund

  47. In a multiphase Rietveld analysis individual scale factors Si are refined for each component i. The weight fraction Wi of each component is given by: Where  is the density and V is the unit cell volume. Lectures co-financed by the European Union in scope of the European Social Fund

  48. Lectures co-financed by the European Union in scope of the European Social Fund

  49. Lectures co-financed by the European Union in scope of the European Social Fund

  50. Phase Transition Studies X-ray powder diffraction is ideally suited for examining crystallographic phase transitions Both compositional and temperature dependence can be examined.    BIMEVOX Lectures co-financed by the European Union in scope of the European Social Fund

More Related