1 / 10

Qualitative Analysis Laboratory

Name:. Qualitative Analysis Laboratory . 30 points. For your laboratory report, please turn in just answers to the questions on the last slide. Handwritten responses will not be accepted. Introduction.

kassia
Télécharger la présentation

Qualitative Analysis Laboratory

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Name: Qualitative Analysis Laboratory 30 points For your laboratory report, please turn in just answers to the questions on the last slide. Handwritten responses will not be accepted.

  2. Introduction Colorimetric methods of analysis have been developed for most of the elements and ionic species. These methods can be employed to quickly determine the chemical composition of an unknown substance or solution. Recall that in solution, ionic compounds can either separate into free ions (soluble) or form precipitates (insoluble salts). Before attempting to analyze an unknown it is useful to develop a logical process to follow. Care must be taken in sampling, collecting and washing precipitates, performing confirmatory tests and most importantly, recording data. It is also good laboratory practice to always analyze a known with each unknown as a double check on the reagents being used.

  3. Introduction (cont’d) The halides (chlorine, bromine and iodine) all form insoluble salts (precipitates) with silver. Silver chloride is a white precipitate where as silver bromide is beige and silver iodide is yellow. The presence of silver chloride can be confirmed by dissolving the precipitate in ammonium hydroxide. Other silver halides are not soluble in ammonium hydroxide. Bromine can be confirmed using potassium permanganate and iodine can be confirmed with ferric nitrate reagent. Phosphate ions can be detected using ammonium molybdate reagent and stannous chloride. Nitrates can be detected using diphenylamine reagent, and sulfate using barium chloride reagent.

  4. Objective You will be provided with three unknown solutions containing any combination of six possible anions: Cl- Br- I- PO42- NO3- SO42- Determine which ions are present in each of the three unknown solutions.

  5. Materials • Other Solutions • 3 Unknown Solutions • 225mL 6M HNO3 • 100mL 6M NH4OH • 100mL mineral oil • 25mL (NH4)6Mo7O24 (ammonium molybdate) • 25mL SnCl2 • 25mL (C6H5)2NH (diphenylamine reagent) • 25mLBaCl2 • 25mL AgNO3 • 25mL KMnO4 • 25mL Fe(NO3)3 • Equipment • disposable pipets • test tubes / rack • stoppers • funnels • filter paper • scupula • deionized water • waste container(s) Test Solutions 100mL 0.1M NaBr 100mL 0.1M NaCl 100mL 0.1M NaI 100mL 0.1M NaNO3 100mL 0.1M Na3PO4 100mL 0.1M Na2SO4 Safety: the nitric acid and ammonium hydroxide can cause severe burns and shortness of breath if inhaled. Wear goggles and wash you hands thoroughly after handling the chemicals!

  6. Procedure Halides 1) Label one test tube for each test and unknown solution . Using a disposable pipet, add about 1mL (about 20 drops) of the 3 test solutions and the 3 unknown solutions to the appropriate test tubes. Add a few drops of acid to each tube. 2) Add about 10 drops of AgNO3reagent to each tube and mix. A precipitate (solid) will form in any tube containing halides. 3) Using filter paper and a funnel, filter the liquid from those tubes that have a precipitate and wash the precipitate with deionized water. Transfer (scrape) precipitates into new test tubes. 4) Add 0.5 ml (about 10 drops) 6M NH4OH to each precipitate. 5) Into new test tubes, place fresh 1.0 mL (20 drop) samples of the 3 test solutions and any unknown solutions that tested positive for halides. Acidify the samples as in step 1. 6) Add 1.0 mL Fe(NO3)3 reagent and mix. Add 1.0 mL of mineral oil, stopper the tube and shake to mix. Allow the layers to separate. A pink/purple color in the oil level confirms the presence of iodide. 7) Pour off the mineral oil layer and discard. Add 1.0mL of KMnO4 reagent to the tube and mix. Add 1.0mL of mineral oil, stopper the tube and shake to mix. Allow the layers to separate. A yellow to brown color in the oil level confirms the presence of bromine.

  7. Observations: Halide Test

  8. Procedure (cont’d) Phosphate 8) Add about 1mL (20 drops) of the Na3PO4 test solution and 3 unknown solutions to labeled test tubes. 9) Add 1.0mL of the ammonium molybdate reagent to the test tubes and mix. Add one to two drops of SnCl2 reagent and mix. The formation of a blue color is a positive test for phosphate. A green or yellow color is negative. Nitrate 10) Label one test tube for the NaNO3 test solution and the 3 unknown solutions. Add about 1mL of the test and unknown solutions to the appropriate test tubes. 11) Add 1.0mL of the diphenylamine reagent to the test tubes and mix. The formation of a blue color is a positive test for nitrate. Sulfate 12) Label one test tube for the Na2SO4 test solution and the 3 unknown solutions. Add 1mL of the test and unknown solutions to the appropriate test tubes. 13) Add a few drops of nitric acid to each tube and mix. 14) Add 1.0mL of BaCl2 solution to each tube and mix. The formation of a white precipitate is a positive test for sulfate.

  9. Observations: Polyatomic Ions Test

  10. Laboratory Report Guidelines Data Analysis 1) (5pts) Explain why Cl-, Br-, I- are all called ‘halides.’ 2) (5pts) Give the chemical names for each of the unnamed chemicals (see Materials section). 3) (5pts) When you tested for the halides, you used silver nitrate to check for precipitation. Write the equations (complete or net ionic) showing the formation of these precipitates. Conclusion 1) (5pts) Which anions are present in which unknown solutions? Explain the details behind your reasoning. 2) (5pts) How does this experiment apply to the real world? Give two specific examples. Error Analysis 1) (5pts) What was the purpose of the 6 test solutions if we already knew what ions they contained?

More Related