Products of Spetsavtomatika -Service LLC

1. Products of Spetsavtomatika-Service LLC

2. Co Ltd “Spetsavtomatika-Servis”, Moscow Manufacture of device for protection against atmospheric overvoltages (DPAO), Chkalovsky Manufacture of steel racks, Perm, Shatura Manufacture of metals, Naro-Fominsk Manufacture of concrete products, Lipetsk In all units there are technical control departments. Assembly manufacture Production site, Naro-Fominsk The total number of the “SpetsAvtomatikaServis” staff is more than 500 people Testing ground Production site, Naro-Fominsk Manufacturing capacity of the Co Ltd “SpetsAvtomatikaServis” today amounts to 40 000 sets of bearings per year Certified laboratories: - Of concrete strength and reinforcement tension; - Of non-destructive testing; - Of quality of the corrosion coating.

3. About us • Spetsavtomatika-Service LLCis a leading enterprise for production of equipment and materials for 6-20 kV air power supply lines with protected conductors. • Our company has been active on the market since 2001, with its own production base, cooperating with leading research and development companies in energy supply and supplying its products to various regions across Russia. • Our products are successfully used at pipeline transport facilities such as South stream, Nord stream, Yamal-Europe. • The company has registered trademarks for its products. Spetsavtomatika-Service LLC also has its own production base for making products.

4. South stream

5. Nord stream

6. Gas Pipeline“Yamal-Europe”

7. Products • Sets of metal (steel) poles for 6-20 kV lines with insulating wire ; Sets of steel poles intended for installing 6-20 kV air power supply lines on the basis of steel multi-faceted poles and variable cross section poles for fastening insulated conductors of type insulating wire , non-insulated aluminum and steel aluminum conductors of types А and АС, as well as hanging fiber optic cable.

9. Advantages of our products Sets of poles for 6-20 kV HV lines Sets of poles of Spetsavtomatika-Service LLC include poles, metal structures, insulators, full set of overhead line hardware, as well as metalware. Sets of poles contain the entire set of components required, which excludes any design defects as compared with HV line completed in bulk. Consequently, this results in significant economy of funds due to exclusion of expenses for additional delivery of required components which shortage is found in the process of line installation. Laying of sets of poles in a compact way significantly decreases costs for transportation and storage, which is essential in line construction along gas pipeline routes, taking into account severe environment, seasonal nature of work and lack of quality roads. Products of Spetsavtomatika-Service LLC are included in the Register of energy equipment, attested and certified at GAZPROMCERT, for application at strategic and essential directions of the fuel and energy complex of Russia.

10. Variable cross section metallic poles are highly reliable products by strength and operational parameters. These poles have a number of advantages as compared to counterparts made by other companies. Variable cross section poles are installed in any types of ground, used in regions with maximum wind pressure and sustain conductor tension of up to 7.8 kN. Sets of metallic (steel) poles for 6-20 kV HV lines with insulating wire type on the basis of metallic variable cross section poles. An advantage of sets of poles manufactured by Spetsavtomatika-Service LLC is a possibility of hanging conductors and fiber-optic cable together, which is used in a wide range of services, including for monitoring and control using electrochemical means of protection. Another advantage is a possibility of using additional equipment (breakers, couplers and clutches) of various manufacturers.

11. Sets of poles for 6-20 kV HV lines with insulating wire on the basis of metallic poles

12. Sets of poles for 6-20 kV HV poles with insulating wire on the basis of metallic poles

13. Sets of poles for 6-20 kV HV lines with insulating wire on the basis of metallic poles

14. Products • Steelmulti-faceted poles for 0.4-35 kV lines Steel multi-faceted poles are intended for supporting 0.4-24 kV air power supply lines. Geological and geophysical parameters of pole provide for application in regions with normal construction conditions with seismicity of 9 points. Poles sustain exposure to permanent and temporary loads for wind regions I-V.

15. Products • Variable cross-section steel poles for 6-20 kV lines Variable cross section steel poles are intended for supporting 6-20 kV power supply lines. Lines may be operated in inhabited and uninhabited localities in wind regions I-VII and are installed on various types of soil.

16. Products • Atmospheric overvoltage protection devices These devices provide atmospheric overvoltage protection to 6-20 kV AC air power supply lines with frequency of 50÷60 Hz and nominal voltage of 6-20 kV and protect insulated HV conductors against fellow-current arc burning.

17. Products • setsof iron concrete poles for 6-20 kV lines with conductors protected with insulating wire; Iron concreted poles for HV lines are designed to increase reliability and service life of HV lines, decrease by 5-10 times likelihood of HV lines failure upon wind loads and significant decrease in operating costs under severe climatic conditions

18. Self-supporting insulating wire Usage of self-supporting insulated wire provides the following benefits: 1. High reliability and uninterrupted supply of electricity to consumers. 2. Reduction of energy losses. 3. Possibility of joint pendants on wires bearings with different levels of tension and with telephone lines. 4. Easy installation and maintenance, especially when working under voltage. 5. Reduction of rescue and recovery operations. 6. Possibility of power lines construction without cutting rides. 7. Exclusion of fire hazards in the event of wires drop to the ground. 8. High security of service and absence of risk of damage when touching phase wires under voltage. 9. Safety of work near power lines. 10. Reduction of likelihood of theft of electricity and the potential threat of vandalism. Consturction Multiwired conducting lead: of aluminium alloy, of aluminium wire strengthened with steel wire; Isolation of light-stabilized clamped polyethylene (XLPE)

19. Quality of products Quality of equipment manufactures is a priority with the company. Spetsavtomatika-Service LLC is certified under Management Quality System (ISO 9001:2000). We offer products attested for application at facilities in the gas industry.

21. Seismic resistance • Developed and manufactured by our company, sets of poles based on variable cross section poles sustain seismic activity of up to 9 points inclusively. It is for this reason our products are supplied to regions with seismic activity of the Far East of Russia and Sakhalin island. Products of Spetsavtomatika-Service LLC undergo periodic seismic bench tests.

22. Strength tests Steel variable cross section poles are subject to regular wind load tests and various strength tests at attested testing ranges in the Russian Federation. Due to highest strength and operational parameters these poles are successfully used in construction of air lines on all types of ground, including subtropical and equatorial soils.

23. Easy transportationEasy transportation is ensured by multi-purpose packaging, developed by our company, which provides for safe transportation of poles for long distances in motor transport, railcars and containers.

26. Statistics The diagram shows that the volume of products manufactured and supplied has grown by 540% and percentage of metallic poles supplied has also increased. Whereas in 2006-2009 growth rates of products manufactured were moderate, for 2010-2011 growth and sale rates have increased significantly, which indicates growing demand for our products.

27. THANK YOU FOR YOUR ATTENTION!