1 / 68

770 likes | 1.31k Vues

Bearings. SKF GX series Steel/PTFE. Rolling bearings. Dynamic rating C dyn of a rolling bearing is the load that will probably start damage to 10% of a large population of bearings after one million rotations.

Télécharger la présentation
## Bearings

**An Image/Link below is provided (as is) to download presentation**
Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author.
Content is provided to you AS IS for your information and personal use only.
Download presentation by click this link.
While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server.
During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

**Dynamic rating Cdyn of a rolling bearingis the load that**will probably start damage to 10% of a large population of bearings after one million rotations.**Dynamic rating Cdyn of a rolling bearingis the load that**will probably start damage to 10% of a large population of bearings after one million rotations. For balls the life increase is the load decrease raised to the power 3.0.**Dynamic rating Cdyn of a rolling bearingis the load that**will probably start damage to 10% of a large population of bearings after one million rotations. For balls the life increase is the load decrease raised to the power 3.0. For rollers the life increase is the load decrease to the power 3.3**Dynamic rating Cdyn of a rolling bearingis the load that**will probably start damage to 10% of a large population of bearings after one million rotations. For balls the life increase is the load decrease raised to the power 3.0. For rollers the life increase is the load decrease to the power 3.3 Half load = 10 times life**SKF say that only 1% of bearings fail for that reason.**They now also quote a fatigue load for infinite life. Most fail because of their seals.**Q = flow m3/sec P = Pressure N/m2 W = slit width**h = slit gap d= pipe diameter S = triangle side L = length all in metres**Viscous force**F = Area . Velocity . Absolute viscosity gap But remember that viscosity is a strong function of temperature**Duck-to-spine bearing specification.**Force in 10 metre htc wave = 30MN (3000 tonne)**Duck-to-spine bearing specification.**Force in 10 metre htc wave = 30MN (3000 tonne) Zero friction**Duck-to-spine bearing specification.**Force in 10 metre htc wave = 30MN (3000 tonne) Zero friction Infinite life**Duck-to-spine bearing specification.**Force in 10 metre htc wave = 30MN (3000 tonne) Zero friction Infinite life Working in sea water**Duck-to-spine bearing specification.**Force in 10 metre htc wave = 30MN (3000 tonne) Zero friction Infinite life Working in sea water 100 mm tolerance**Duck-to-spine bearing specification.**Force in 10 metre htc wave = 30MN (3000 tonne) Zero friction Infinite life Working in sea water 100 mm tolerance Diameter = 14 metre Length = 45 metre**Duck-to-spine bearing specification.**Force in 10 metre htc wave = 30MN (3000 tonne) Zero friction Infinite life Working in sea water 100 mm tolerance Diameter = 14 metre Length = 45 metre Pressure = 0.45 bar

More Related