30 likes | 60 Vues
The RE6400 extender from Linksys is an 802.11ac-capable Boost WiFi extender. With its two strong exterior antennas, it immediately extends the wireless networku2019s range. In essence, it multiplied the routeru2019s signals by two to extend and strengthen them. It is a member of the AC1200 extender family, which offers signal coverage for 1200 square feet.<br>
E N D
Linksys RE6400 AC1200 Setup You must become familiar with your device before starting Linksys RE6400 AC1200 Setup. The RE6400 extender from Linksys is an 802.11ac-capable Boost WiFi extender. With its two strong exterior antennas, it immediately extends the wireless network’s range. In essence, it multiplied the router’s signals by two to extend and strengthen them. It is a member of the AC1200 extender family, which offers signal coverage for 1200 square feet.
Here are the Linksys RE6400 AC1200 Setup instructions. Start your computer or laptop, then click the wireless icon. You will now see a list of available wireless networks in your device’s range. From the drop-down option, select Linksys Extender Setup. Launch any web browser once connected to the Extender’s network. In the address bar, type extender.linksys.com and press the enter key. Please contact our specialists if you see error messages while logging into your extension. On the user licence agreement, click the box for acceptance. Start the setup by pressing the start button. Choose “configure as a wireless extender” and then click “next.” Choose the name of the wireless network that you want to extend.
It may take some time for your wireless network to be discovered. If it fails to recognise your network, you must input the SSID manually. In the next prompt, enter your password. Configure your range extender according to the on- screen directions. After you’ve customized the parameters to your satisfaction, click the Next button. Determine the location of the extension using spot finder technology. Click the next button if the location is right. Alternatively, make the appropriate modifications. The final step is to generate an Admin password for future access to the extender’s configuration portal. After you’ve set the administrator password, press the save button.