1 / 6

IPv6 Host Configuration in 6rd Deployment draft-guo-softwire-6rd-ipv6-config-00

IPv6 Host Configuration in 6rd Deployment draft-guo-softwire-6rd-ipv6-config-00. Xiaohu Xu (xuxh@huawei.com) Dayong Guo (guoseu@huawei.com ) IETF 78, Maastricht. DHCPv4 server. IPv6-only host. 6rd BR. CPE. Residential Site. IPv6 Internet. IPv4 SP Network (6rd Domain). Scenario.

kennedy-lee
Télécharger la présentation

IPv6 Host Configuration in 6rd Deployment draft-guo-softwire-6rd-ipv6-config-00

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. IPv6 Host Configuration in 6rd Deploymentdraft-guo-softwire-6rd-ipv6-config-00 Xiaohu Xu (xuxh@huawei.com) Dayong Guo (guoseu@huawei.com ) IETF 78, Maastricht

  2. DHCPv4 server IPv6-only host 6rdBR CPE Residential Site IPv6 Internet IPv4 SP Network (6rd Domain) Scenario • Besides IPv6 addresses, IPv6-only hosts in residential sites may also need to obtain other configuration information (e.g., DNS servers, NTP servers or SIP servers etc.). • DNS Proxy [RFC5625] is an mature option but only for DNS configuration. • Stateless DHCPv6 [RFC3736] is a standard approach for obtaining other configuration information besides DNS.

  3. Requirements for Running DHCPv6 in 6rd • As stated in the DHCPv6 specification [RFC3315], "...The client MUST use a link-local address assigned to the interface for which it is requesting configuration information as the source address in the header of the IP datagram." • Since the link-local address can not travel through the 6rd domain, the CPE SHOULD act as a DHCPv6 relay agent. • Relaying DHCP request messages to All_DHCP_Servers multicast address is not optimal in 6rd scenario. • Hence, the CPE as a DHCP relay agent, SHOULD know at least one DHCPv6 server address.

  4. DHCPv4 Option for DHCPv6 Server • OPT_DHCPv6: • TBD. • Option-length: • The length of the DHCP option in octets. • IPv6 Address (es) of DHCPv6 Server (s): • One or more IPv6 addresses of DHCPv6 servers.

  5. 6rdBR DHCPv4 server IPv6-only host IPv6 Internet CPE DHCPv6 server Home Network IPv4 SP Network (6rd Domain) CPE 6rd Site owned by SP DHCPv6 in 6rd

  6. Next Steps • Solicit more comments from the WG. • Prototype and experiment. • Ask for WG adoption.

More Related