1 / 6

Pull the tape across the river Use cross-section stakes to tighten the tape

Pull the tape across the river Use cross-section stakes to tighten the tape Determine the water width (W) and Wi = W/20. Read the tape at LEW Smile a lot. Set rod at ½ Wi from LEW Measure depth Careful of length units on probe Careful of the bow wave. Don’t read depth here…

Télécharger la présentation

Pull the tape across the river Use cross-section stakes to tighten the tape

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Pull the tape across the river • Use cross-section stakes to tighten the tape • Determine the water width (W) and Wi = W/20

  2. Read the tape at LEW • Smile a lot

  3. Set rod at ½ Wi from LEW • Measure depth • Careful of length units on probe • Careful of the bow wave Don’t read depth here… Do read depth here…

  4. What’s he doing!!?? That’s only 59% depth… • Set rod at 60% depth • Push both black buttons at once • Wait 30-45 seconds • Careful of where you stand

  5. Bite the bottom lip • Read the bottom number • Divide V by 10 for m/s

  6. Take good notes Calculate as you go Ai = di*(Xafter – Xbefore)/2 Qi = Ai*Vi Q = SQi Keep one heel up!

More Related