1 / 17

Electrical Measurement, Ohm’s Law, & Watt’s Law

Electrical Measurement, Ohm’s Law, & Watt’s Law. CVSD Electronics 1. Resistance. A measure of the opposition to the flow of electrons (current) through a material Unit of Measurement: Ohm (Ω) Symbol: R = Resistance. Current.

kiet
Télécharger la présentation

Electrical Measurement, Ohm’s Law, & Watt’s Law

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Electrical Measurement, Ohm’s Law, & Watt’s Law CVSD Electronics 1

  2. Resistance • A measure of the opposition to the flow of electrons (current) through a material • Unit of Measurement: • Ohm (Ω) • Symbol: • R = Resistance

  3. Current • A measure of the total amount of electrons flowing in a circuit in a given unit of time • Unit of Measurement: • Ampere (A) • Symbol: • I = Intensity

  4. Voltage • A measure of the Electromotive Force (EMF) or pressure that pushes electrons through a circuit • Unit of Measurement: • Volt (V) • Symbol: • E = Electromotive Force

  5. Power • A measurement of the rate of consuming energy, transferring energy, or doing work • Unit of Measurement: • Watt (W) • Symbol: • P

  6. Ohm’s Law • Describes the mathematical relationship between resistance, current, and voltage Voltage (E) = Amperage (I) x Resistance (R) • With two of these values, you can use Ohm’s Law to find the third (DIY Alarm Forum, 2006)

  7. Variations of Ohm’s Law • E = IxR • I = E/R • R = E/I

  8. Ohm’s Law Example • E = 24 VDC • I = ? • R = 12 Ω Calculations E=IR 24=Ix12 I = 24/12 I = 2 A

  9. Watt’s Law • Describes the mathematical relationship between power, current, and voltage Power (P) = Amperage (I) x Voltage (E) • With two of these values, you can use Watt’s Law to find the third

  10. Variations of Watt’s Law • P = IE • I = P/E • E = P/I

  11. Watt’s Law Example • P = 36 W • I = ? • E = 12 V Calculations P=IE 36=Ix12 I = 36/12 I = 3 W

  12. Combinations of Ohm’s and Watt’s Laws

  13. Measuring Resistance with the DMM • Must select Ohmmeter Range (Ω) • Pos (+) lead must be in Volt/ Ohm pin • Sat meter to proper range • Must wire in parallel with circuit • Power must be removed from the circuit

  14. Measuring Voltage with the DMM • Must select DC Voltage Range • Pos (+) lead must be in Volt/ Ohm pin • Set meter to proper range • Must wire in parallel with the circuit • Circuit must be have power

  15. Measuring Current with the DMM • Must select DC Current Range • Set meter to proper range. (meter can be damaged if not set to the proper range) • Must wire in series with the circuit • Circuit must be have power

  16. Measured Tolerance • Predicted values, and measured values may not always be exactly the same • There is unaccounted for resistance in the wires etc. • Applied voltage may fluctuate • Human error may disturb measurements • Components have tolerance (not always exact values) • As components change temperature, resistance may also change

  17. Review • State Ohm’s Law • State Watt’s Law • How is voltage measured? • How is resistance measured? • How is current Measured? • Why do predicted and calculated values differ?

More Related