1 / 15

Current and resistance

Current and resistance. Principles of Physics. Moving vs. Nonmoving Charge. So far, we’ve talked about non-moving charge We know that charged objects : exert an electrostatic force on each other move when the force is unbalanced

king
Télécharger la présentation

Current and resistance

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Current and resistance Principles of Physics

  2. Moving vs. Nonmoving Charge So far, we’ve talked about non-moving charge We know that charged objects : • exert an electrostatic force on each other • move when the force is unbalanced • gain and lose energy as they move toward and away from other charged objects • Moving toward a like charge → increase in PE • Moving away from like charge→ decrease in PE We also know that a voltage exists between charged objects

  3. Moving vs. Nonmoving Charge • Charged objects are not useful unless moving • They move if there is a voltage Circuit A system in which charged objects move in response to a voltage source Must include: voltage source (battery) closed path for charges to follow (wires) method of controlling rate of flow (resistor)

  4. Current Current (I): flow of electrons (negative charge) • In circuits charge is moving in solid materials (copper wires) • Only electrons can move in solids (Positive charge may flow in liquids or gases)

  5. Current Current/electron flow is calculated by I = Current q = charge (C) t = time (s) Current units: 1 C/s = 1 Ampere = 1 Amp = 1 A I = q t

  6. Simple Circuit Voltage supply (power supply) Resistor Wire - +

  7. Current Electrons flow from the negative side of the voltage supply (the short side) Conventional current flows from the positive side of the voltage supply (the long side) - +

  8. Junction Rule Junction: where multiple wires (paths) meet All current flowing into a junction = all current flowing out of a junction. Current flowing in: 1.5 A + 2.5 A = 4 A 1.5 A 2.5 A 1.0 A Current flowing out: 3.0 A IN = OUT *Always add x to the side with less current 4 A = 3.0 A + x 3.0 A

  9. Controlling Current • When one electron leaves from the negative side of the voltage supply another one enters the positive side • The rate that electrons leave is current • How fast they leave depends on resistance in the circuit

  10. Resistance • A material with high resistance typically causes the electrons to experience more collisions as they move through

  11. RESISTOR

  12. Controlling Current http

  13. Resistance, R, is related to: • Type of material • Some materials have more resistance than others • Length • Electrons will experience more collisions as they travel through the longer resistor • Cross sectional area • Increasing cross sectional area decreases resistance because more electrons can get through at one time • Temperature • In metallic conductors, as temperature increases, resistance increases

More Related