1 / 1

Polyester (PE) Aluminum Composite Panel Sheet case

the main disadvantages of extruded aluminum behave in three normal ways: wear, cracks and deformation.

kingpanel
Télécharger la présentation

Polyester (PE) Aluminum Composite Panel Sheet case

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Polyester (PE) Aluminum Composite Panel Sheet case It is noteworthy that the disadvantages of Polyester (PE) Aluminum Composite Panel Sheet handrails are not that much, but tends to be whitish in wet conditions. During the process of failure modes it can break in the early stage due to the impact of the mold, plastic deformation, adhesion and wear, bending and valley folding phenomena. However, the main disadvantages of extruded aluminum behave in three normal ways: wear, cracks and deformation. http://www.jiyu-acp.com/aluminum-composite-panels/pe-acp.html The process of aluminum extrusion is brought about by a non-lubricated hot extruded material that contacts the Polyester (PE) Aluminum Composite Panel Sheet open point of the mold, one side coming into contact with the calibrated rectilinear surface and the other side rubbing the surface of the cavity, Calibrate straight to break the aluminum case. At the same time, the surface of the mold is bonded to several blank metals that change the geometry of the mold. This is also a kind of failure, it is a kind of failure of wear. Cracks are distributed in certain parts of the mold, small cracks occur in some service periods, and the length Polyester (PE) Aluminum Composite Panel Sheet expands to a specific size. 3. Deformation defect is cantilever eccentricity and undercutting.

More Related